Omron Wrist Blood Pressure Monitor Manual

The Omron Wrist Blood Pressure Monitor is a compact, portable device for measuring systolic and diastolic blood pressure and pulse rate from the wrist. It features IntelliSense technology for accurate inflation, hypertension detection indicators, a large LCD display with backlight, memory storage for multiple users, irregular heartbeat detection, body movement detection, and a carrying case. Powered by 2 AAA batteries. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, wrist cuff with Velcro closure, storage case, instruction manual, and 2 AAA batteries.

Safety Precautions

Read all instructions before use. Not a medical device for diagnosis.

1. Do not use on infants, children, or persons unable to express themselves.
2. Do not use during bathing or showering.
3. Do not wrap cuff over clothing; ensure proper positioning on bare wrist.
4. Consult physician for interpretation of readings and treatment decisions.
5. Keep away from electromagnetic fields (microwaves, cell phones).

WARNING! Do not use if you have arrhythmia, pre-eclampsia, or circulatory problems without consulting a doctor. Ensure cuff is not too tight.

Device Components

Identify all parts before use.

• Main Unit: Contains display, buttons, and air hose connection.
• Wrist Cuff: With Velcro closure and positioning mark.
• Air Hose: Connects cuff to main unit.
• Battery Compartment: Holds 2 AAA batteries (included).
• Storage Case: Zippered pouch for device and accessories.

CAUTION! Do not disassemble or modify the device. Keep away from water and extreme temperatures.

Specifications

• Measurement Method: Oscillometric (wrist).
• Measurement Range: Pressure: 0-299 mmHg; Pulse: 40-180 beats/min.
• Accuracy: Pressure: ±3 mmHg; Pulse: ±5% of reading.
• Memory: 60 readings with date/time.
• Display: LCD with backlight.
• Power Source: 2 AAA batteries (DC 3V).
• Battery Life: Approximately 300 measurements.
• Operating Conditions: Temperature: 50°F to 104°F (10°C to 40°C); Humidity: 30% to 85% RH.
• Dimensions: Main unit: 2.8" x 3.9" x 1.2"; Cuff circumference: 5.3" to 8.5".
• Weight: Approximately 3.5 oz (including batteries).

Initial Setup

Prepare device for first use.

1. Insert batteries: Open compartment, insert 2 AAA batteries observing polarity.
2. Attach cuff: Connect air hose to main unit until it clicks.
3. Set date/time: Press MEMORY button for 3 seconds, use START/STOP to adjust.
4. Test device: Perform a measurement to ensure proper operation (see Section 7).

Tip: Use fresh alkaline batteries for best performance. Remove batteries if not used for extended periods.

Taking a Measurement

For accurate results, follow these steps carefully.

1. Rest for 5 minutes before measuring. Avoid caffeine, exercise, and smoking for 30 minutes prior.
2. Sit comfortably with back straight, feet flat on floor.
3. Place cuff on left wrist (unless instructed otherwise by physician). Position cuff 0.5-1 inch above wrist bone with display facing upward.
4. Wrap cuff snugly using Velcro closure.
5. Rest elbow on table, raise wrist to heart level. Keep cuff at heart level throughout measurement.
6. Press START/STOP button. Device will inflate automatically.
7. Remain still and quiet until measurement is complete. Results display with systolic, diastolic, and pulse readings.
8. Record reading if desired. Device automatically stores it in memory.
9. Remove cuff by releasing Velcro.

WARNING! Do not move or talk during measurement. Ensure cuff is at heart level for accuracy.

Understanding Results

Interpret readings using standard guidelines.

Symbols: Hypertension Indicator (heart icon flashes if reading is high); Irregular Heartbeat Symbol (heart with '!' appears if detected); Body Movement Symbol (person icon appears if movement occurs).

Note: Consult your physician for personalized interpretation and treatment.

Memory Function

Store and recall past readings.

1. To view memory: Press MEMORY button. Display shows average of last 3 readings.
2. To scroll: Press START/STOP to view individual readings with date and time.
3. To clear memory: Press and hold MEMORY button for 5 seconds until "CLR" appears. Release to clear all stored data.

Tip: Memory is useful for tracking trends. Record readings in a log for doctor visits.

Care & Maintenance

Keep device clean and functional.

1. Clean cuff with mild soap and damp cloth; do not immerse in water.
2. Wipe main unit with dry, soft cloth. Do not use solvents or abrasives.
3. Store in carrying case in a cool, dry place away from direct sunlight.
4. Replace batteries when low battery icon appears.
5. Inspect cuff periodically for wear or damage.

CAUTION! Do not wash cuff in washing machine. Do not expose device to high temperatures or humidity.

Regulatory Information

FDA Cleared: For over-the-counter home use. FCC Part 15: Class B digital device; complies with interference limits. CE Marked: Meets European health, safety, and environmental requirements. Manufacturer: Omron Healthcare, Inc. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Reset: Remove batteries for 1 minute, then reinsert.

Service: 1-800-634-4350; www.omronhealthcare.com