Omron Ultra Premium Manual

The Omron Ultra Premium is a high-performance blood pressure monitor designed for clinical-grade accuracy at home. It features IntelliSense technology for comfortable inflation, hypertension indicator, irregular heartbeat detector, multi-user memory with date/time stamp, body movement detection, and a large backlit display. Powered by 4 AA batteries or AC adapter. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. First-Time Setup 4. Specifications 5. Controls and Display 6. Taking a Measurement 7. Memory Function 8. Advanced Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with display, Arm cuff, AC adapter, Storage case, Instruction manual.

Feature	Description
IntelliSense Technology	Automatically adjusts inflation for comfortable measurement
Hypertension Indicator	Displays warning symbol if reading exceeds WHO guidelines
Irregular Heartbeat Detector	Detects and displays irregular heartbeat during measurement
Multi-User Memory	Stores up to 200 readings with date/time stamp for two users
Body Movement Detection	Alerts if movement is detected during measurement
Large Backlit Display	Easy-to-read LCD with backlight for low-light conditions
AC Adapter Port	For power connection when not using batteries
START/STOP Button	Initiates and stops measurement
MEMORY Button	Accesses stored readings
POWER Button	Turns monitor on/off

Package Contents

Unpack and verify all components are present.

Omron Ultra Premium monitor (main unit)
Comfortable Fit Arm Cuff (22-42 cm circumference)
AC Adapter (model HEM-790IT-AD)
Storage Case
Instruction Manual (this document)
Quick Start Guide
4 AA batteries (for initial use)

WARNING! Do not use if any components are damaged. Keep all packaging for future reference.

First-Time Setup

Prepare monitor for first use.

Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
Connect cuff: Insert cuff tube connector into port on left side of monitor until it clicks.
Set date/time: Press MEMORY button for 3 seconds, use START/STOP to adjust values.
Select user: Press USER button to toggle between USER 1 and USER 2.

CAUTION! Ensure cuff is properly connected before use. Sit quietly for 5 minutes before first measurement.

Specifications

Measurement Method: Oscillometric
Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/minute
Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
Memory Capacity: 100 readings per user (2 users total)
Cuff Size: 22-42 cm (arm circumference)
Power Source: 4 AA batteries or AC adapter (6V DC, 1A)
Battery Life: Approximately 400 measurements
Display: LCD with backlight
Operating Conditions: Temperature: 10°C to 40°C, Humidity: 30% to 85% RH

Controls and Display

Front Panel: POWER, START/STOP, MEMORY, USER. Display shows systolic/diastolic pressure, pulse rate, date/time, user indicator, battery status, and warning symbols.

Display Symbols: Heart symbol (pulse), Clock (date/time), User 1/2 indicator, Battery icon, Hypertension warning, Irregular heartbeat symbol, Body movement detection icon.

Settings: Date/time format (MM/DD or DD/MM), backlight duration (15/30/60 seconds), measurement unit (mmHg/kPa).

Taking a Measurement

For accurate readings, follow proper procedure.

Sit comfortably with back straight and feet flat on floor.
Place cuff on bare upper arm 1-2 cm above elbow.
Position cuff tube over inner arm center.
Rest arm on table with cuff at heart level.
Press START/STOP button to begin measurement.
Remain still and quiet until measurement completes.
Read results on display (systolic/diastolic/pulse).

Tip: Avoid eating, smoking, or exercising 30 minutes before measurement.

Memory Function

Stores and recalls previous measurements.

View memory: Press MEMORY button to display average of last 3 readings.
Scroll through readings: Press START/STOP while in memory mode to view individual readings with date/time.
Clear memory: Hold MEMORY button for 5 seconds until "CLr" appears (clears current user's memory only).
Switch users: Press USER button to toggle between USER 1 and USER 2 memory.

Note: Memory is maintained when batteries are replaced if done within 3 minutes.

Advanced Features

Hypertension Indicator: Displays if systolic ≥135 mmHg or diastolic ≥85 mmHg. Irregular Heartbeat Detection: Symbol appears if irregular rhythm detected during measurement. Body Movement Detection: "M" symbol appears if excessive movement detected.

Care & Maintenance

Clean with soft, dry cloth. Do not immerse in water. Store in case when not in use. Replace cuff if damaged or stiff.

CAUTION! Do not use alcohol or solvents. Keep away from extreme temperatures and humidity.

Regulatory Information

FDA Cleared: K012345. CE Marked: Medical Device Directive 93/42/EEC. Manufactured for Omron Healthcare, Inc. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace all 4 AA batteries; ensure proper polarity.
Error E1	Cuff not connected	Ensure cuff tube is fully inserted into monitor.
Error E2	Cuff over-inflated	Remove cuff and restart measurement.
Inconsistent readings	Improper positioning	Ensure cuff at heart level; sit still during measurement.
Memory not saving	Batteries removed too long	Replace batteries within 3 minutes to preserve memory.

Reset: Remove batteries and AC adapter for 5 minutes, then reinsert.

Service: 1-800-634-4350; www.omronhealthcare.com