Omron Silver BP5250 Manual

The Omron Silver BP5250 is an automatic upper arm blood pressure monitor designed for home use. It features IntelliSense technology for accurate readings, a large backlit display, hypertension detection, body movement detection, irregular heartbeat detection, memory storage for multiple users, and a comfortable D-ring cuff. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Precautions 3. First-Time Setup 4. Specifications 5. Controls and Display 6. Taking a Measurement 7. Memory Function 8. Advanced Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with backlit LCD display, D-ring cuff, AC adapter, storage case, instruction manual.

Feature	Description
IntelliSense Technology	Automatically inflates to optimal pressure for accurate reading
Large Backlit Display	Easy-to-read results in various lighting conditions
Hypertension Indicator	Alerts when reading is above normal range
Irregular Heartbeat Detector	Detects and displays irregular heartbeat during measurement
Body Movement Detection	Alerts if movement is detected during measurement
Memory Storage	Stores up to 100 readings with date and time stamp
Multi-User Support	Supports two separate user profiles
D-Ring Cuff	22-42 cm circumference for easy self-application
AC Adapter Port	For power connection (batteries also supported)
START/STOP Button	Initiates and stops blood pressure measurement

Safety Precautions

Read all instructions before use. Consult physician for proper use.

Do not use on infants, children, or persons unable to express themselves.
Do not use on an arm with an intravenous drip or surgical wound.
Do not inflate cuff when not wrapped around arm.
Do not use near flammable gases or in oxygen rich environments.
Keep device away from children and pets.

WARNING! This device is not a substitute for professional medical diagnosis. Always consult your physician about your blood pressure.

First-Time Setup

Prepare device for first use.

Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
Set date and time: Press MEMORY button, use SET button to adjust values.
Select user: Press USER button to select User 1 or User 2.
Apply cuff: Place cuff on bare upper arm, align artery marker with brachial artery.
Position arm: Rest arm on table with cuff at heart level.

CAUTION! Ensure cuff is properly positioned for accurate readings. Avoid talking or moving during measurement.

Specifications

Measurement Method: Oscillometric
Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/minute
Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
Memory: 100 readings (50 per user)
Cuff Size: 22-42 cm (8.7-16.5 inches)
Power Source: 4 AA batteries or AC adapter (sold separately)
Battery Life: Approximately 300 measurements
Display: LCD with backlight
Dimensions: Main unit: 123mm x 98mm x 141mm
Weight: Approximately 340g (without batteries)

Controls and Display

Front Panel: START/STOP button, MEMORY button, USER button, SET button.

Display Symbols: User indicator (1/2), Memory full indicator, Battery low indicator, Heartbeat symbol, Hypertension indicator, Irregular heartbeat symbol, Body movement indicator, Date/Time display, Systolic/Diastolic pressure, Pulse rate.

Settings: Date/Time setup, Memory review, User selection, Average reading calculation (last 3 readings).

Taking a Measurement

Follow these steps for accurate readings.

Sit comfortably with feet flat on floor, back supported.
Apply cuff to bare upper arm 1-2 cm above elbow.
Position cuff at heart level, palm facing upward.
Press START/STOP button - device will automatically inflate.
Remain still and quiet during measurement.
Reading displays when complete - note systolic/diastolic pressures and pulse.
Press START/STOP again to turn off device, or it will auto power-off after 1 minute.

Tip: Wait at least 5 minutes between measurements on the same arm.

Memory Function

Stores and recalls previous readings.

View memory: Press MEMORY button to scroll through stored readings.
Check average: Hold MEMORY button for 3 seconds to display average of last 3 readings.
Clear memory: While in memory mode, press and hold SET button for 5 seconds to clear current user's memory.
Switch users: Press USER button to toggle between User 1 and User 2 memories.

Note: Memory full indicator appears when 50 readings are stored per user.

Advanced Features

IntelliSense Technology: Automatically determines optimal inflation level. Hypertension Detection: Displays warning symbol if systolic ≥135 mmHg or diastolic ≥85 mmHg. Irregular Heartbeat Detection: Displays symbol if irregular rhythm detected during measurement. Body Movement Detection: Displays symbol and may restart measurement if movement detected.

Care & Cleaning

Remove batteries before cleaning. Wipe with soft, dry cloth. Do not immerse in water.

Cuff cleaning: Wipe with damp cloth and mild detergent, then dry completely.
Storage: Keep in provided case in cool, dry place away from direct sunlight.
Battery maintenance: Remove batteries if not using for extended period.

CAUTION! Do not use alcohol, benzene, or abrasive cleaners. Do not disassemble unit.

Regulatory Information

FDA Cleared: K012864. CE Marked: Medical Device Directive 93/42/EEC. Manufactured for Omron Healthcare, Inc. Copyright © Omron Healthcare, Inc. All rights reserved. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace all 4 AA batteries; ensure proper orientation.
Error code "E"	Cuff not properly attached	Check cuff connection; reattach firmly.
Error code "Er1"	Measurement error	Reposition cuff at heart level; remain still; retry.
Inconsistent readings	Body movement, talking	Sit quietly for 5 minutes before measuring; avoid talking.
Cuff won't inflate	Air leak, low batteries	Check cuff for holes; replace batteries; ensure tube connection.
Memory not saving	Memory full	Clear memory for current user; switch to other user.
Irregular heartbeat symbol	Possible arrhythmia	Consult physician if symbol appears frequently.

Reset: Remove batteries for 5 minutes to reset device.

Service: 1-800-634-4350; www.omronhealthcare.com