Omron Series 7 Wrist Manual

The Omron Series 7 Wrist is a clinically validated, automatic blood pressure monitor designed for convenient at-home use. It features IntelliSense® technology for comfortable inflation, irregular heartbeat detection, hypertension indication, body movement detection, and a large, easy-to-read display. This manual covers safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Package Contents 4. Device Overview 5. Initial Setup & Battery Installation 6. Taking a Measurement 7. Understanding the Display & Symbols 8. Memory Function 9. Care & Maintenance 10. Troubleshooting 11. Specifications & Warranty

Features at a Glance

Key components: Main Unit, Wrist Cuff, Storage Case, Instruction Manual, 2x AAA Batteries.

Feature	Description
IntelliSense® Technology	Automatically adjusts inflation for a comfortable, accurate reading
Irregular Heartbeat Detection	Detects and displays an icon if an irregular rhythm is found during measurement
Hypertension Indicator	Displays a warning symbol if systolic/diastolic readings are high based on WHO guidelines
Body Movement Detection	Alerts you if excessive movement is detected during measurement
Memory Function	Stores up to 100 readings with date and time stamp
Large LCD Display	Easy-to-read results for systolic, diastolic, and pulse
Automatic Power Off	Conserves battery life by turning off after 1 minute of inactivity
User Classification	Supports memory for two users
Wrist Positioning Guide	Ensures proper cuff placement for accurate results

Safety Information

Read all instructions before use.

This device is for home use only, not for professional medical diagnosis.
Do not use on infants, children, or persons who cannot express themselves.
Consult your physician before use if you have arrhythmia, poor circulation, or other cardiovascular conditions.
Do not use the device on a wounded or injured wrist.
Wait at least 5 minutes between consecutive measurements on the same person.

WARNING! Do not modify the device. Keep batteries away from children. Do not use near flammable gas or in an MRI environment.

Package Contents

Omron Series 7 Wrist Blood Pressure Monitor (Model HEM-6232T)
Wrist Cuff (pre-attached to monitor)
Storage Case
Instruction Manual (this document)
Two (2) AAA alkaline batteries
Warranty Card

CAUTION! Inspect all contents upon unpacking. Do not use if any part appears damaged.

Device Overview

Front Panel:

LCD Display: Shows measurement results, icons, and date/time.
START/STOP Button: Powers the device on and begins the measurement cycle.
MEMORY Button: Recalls stored readings.
USER Button: Selects User 1 or User 2 for memory storage.
SET Button: Used to set the clock.

Wrist Cuff: Integrated with the main unit. Contains the air tube, positioning mark, and metal D-ring.

Initial Setup & Battery Installation

Before first use, install batteries and set the time.

Open the battery compartment cover on the back of the unit.
Insert two AAA batteries, observing the correct polarity (+/-).
Close the cover securely.
Press the START/STOP button. The display will show all segments briefly.
To set the clock: Press and hold the SET button for 3 seconds. Use the START/STOP button to adjust hours/minutes and the MEMORY button to confirm and move to the next setting.

Tip: Replace batteries when the low battery icon appears on the display.

Taking a Measurement

For the most accurate results, follow these steps carefully.

Prepare: Avoid eating, smoking, exercising, or bathing for 30 minutes prior. Sit quietly for 5 minutes.
Position: Place the cuff on your bare left wrist with the palm facing up. Position the cuff edge 0.5-1 inch (1-2 cm) from your hand. The display should be facing you.
Secure: Wrap the cuff snugly around your wrist and fasten it with the cloth closure.
Posture: Rest your elbow on a table so the cuff is at heart level. Relax your hand with palm up.
Start: Press the START/STOP button. The cuff will inflate automatically. Remain still and quiet until measurement is complete.
Read: Your systolic pressure, diastolic pressure, and pulse rate will be displayed. The reading is automatically stored in memory.

WARNING! Do not move or talk during measurement. Ensure the cuff is at heart level.

Understanding the Display & Symbols

Symbol	Meaning
❤ (flashing)	Irregular heartbeat detected during measurement
☉ (sun icon)	Hypertension indicator (reading exceeds WHO guidelines)
↔ (movement icon)	Excessive body movement detected
U1 / U2	Indicates memory bank for User 1 or User 2
M	Memory recall mode is active
Low Battery	Replace batteries soon
Date & Time	Shows when the reading was stored

Memory Function

The device stores the last 100 readings with date and time for two users.

To view memory: Press the MEMORY button. The most recent reading for the selected user appears.
To switch users: Press the USER button to toggle between U1 and U2.
To scroll: Press the MEMORY button repeatedly to scroll through older readings.
To clear all memory: While in memory mode, press and hold the MEMORY button for 3 seconds until "CLR" appears. Release to clear all data for the current user.

Note: Memory is retained even when batteries are removed.

Care & Maintenance

Uninstall batteries before cleaning.

Cleaning: Wipe the monitor and cuff with a soft, dry cloth. Do not immerse in water or use detergents, solvents, or sprays.
Storage: Store in the provided case in a cool, dry place away from direct sunlight, extreme temperatures, dust, and humidity.
Cuff Care: Do not fold the cuff tightly or twist the air tube. Do not inflate the cuff without it being wrapped around a wrist.
Batteries: Remove batteries if the device will not be used for 3 months or more.

CAUTION! Never attempt to repair the device yourself.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Display is blank	Batteries depleted/incorrectly installed	Replace or reinstall batteries correctly.
Error Code "E" appears	Cuff not wrapped correctly / movement	Re-wrap cuff snugly, keep still, and retry.
Inconsistent readings	Incorrect posture or timing	Ensure proper posture (cuff at heart level), wait 5 min between readings.
Device does not inflate	Air tube blockage / battery low	Check tube is not kinked; replace batteries.
Memory not displaying	Wrong user selected / memory empty	Press USER button to switch users. Ensure readings were taken.

Reset: Remove batteries, wait 1 minute, and reinstall.

Specifications & Warranty

Measurement Method: Oscillometric
Pressure Range: 0 - 299 mmHg
Pulse Range: 40 - 180 beats per minute
Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
Memory: 100 readings x 2 users
Power Source: 2 x AAA 1.5V alkaline batteries (DC 3.0V)
Auto Shut-off: Approximately 1 minute after last button press
Operating Environment: 50°F to 104°F (10°C to 40°C), 15% to 90% RH
Warranty: 5-year limited warranty from date of purchase.

For customer support, visit www.omronhealthcare.com or call 1-800-634-4350.