Omron Model BP786N User Manual

The Omron Model BP786N is an upper arm blood pressure monitor with IntelliWrap™ Cuff, TrueRead™ technology, irregular heartbeat detection, hypertension indicator, 200-memory storage with guest mode, morning hypertension indicator, and body movement detection. Powered by 4 AA batteries or AC adapter. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Display 6. Taking Measurements 7. Memory Function 8. Special Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with LCD display, IntelliWrap™ Cuff, AC adapter, 4 AA batteries, storage case, instruction manual.

Feature	Description
IntelliWrap™ Cuff	Pre-formed cuff for easy self-application
TrueRead™ Technology	Ensures accurate readings
Irregular Heartbeat Detection	Detects and displays irregular heartbeats during measurement
Hypertension Indicator	Displays warning symbol for high readings
200-Memory Storage	Stores readings with date/time stamps
Guest Mode	Allows measurements without affecting stored memory
Morning Hypertension Indicator	Flags morning readings above threshold
Body Movement Detection	Alerts if movement affects measurement
LCD Display	Large, easy-to-read screen
START/STOP Button	Initiates and stops measurements

Installation & Setup

Unpack and inspect contents. Place on clean, stable surface.

Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
Connect AC adapter (optional): Plug into DC jack and wall outlet.
Attach cuff: Connect cuff tube to main unit port until it clicks.
Set date/time: Press SET button, use arrows to adjust, press SET to confirm.

WARNING! Use only specified batteries/adapter. Keep away from children. Ensure cuff connection is secure.

First-Time Use

Power on monitor; follow initial setup prompts.

Apply cuff: Wrap cuff on bare upper arm 1-2 cm above elbow.
Position arm: Rest arm on table with cuff at heart level.
Take measurement: Press START/STOP, remain still until complete.
View results: Systolic, diastolic, pulse displayed with any indicators.
Store reading: Automatically saved to memory (unless in Guest Mode).

CAUTION! Do not inflate cuff when not attached to arm. Avoid talking or moving during measurement.

Specifications

Measurement Method: Oscillometric
Pressure Range: 0-299 mmHg
Pulse Range: 40-180 beats/minute
Accuracy: Pressure: ±3 mmHg, Pulse: ±5%
Memory: 200 readings with date/time
Cuff Size: Fits arm circumference 22-42 cm
Power Source: 4 AA batteries or AC adapter (included)
Battery Life: Approx. 500 measurements
Operating Conditions: 10°C-40°C, 15%-85% humidity
Display: LCD with backlight

Controls and Display

Access functions via front panel buttons. Display shows systolic, diastolic, pulse, date/time, memory index, and icons.

Buttons: START/STOP, MEMORY, SET, UP/DOWN arrows.

Display Icons: Irregular heartbeat, hypertension, body movement, morning indicator, battery low, memory full, guest mode. Settings: Date/time, user selection (2 users), memory review, average calculation (last 3 readings).

Taking Measurements

For accurate readings, follow proper procedure.

Sit quietly for 5 minutes before measuring.
Apply cuff correctly with tube aligned with artery.
Press START/STOP - cuff inflates automatically.
Remain still and quiet until cuff deflates completely.
Record results if desired; reading auto-saves.
Wait 2-3 minutes between measurements.

Tip: Take measurements at same time daily for consistent tracking.

Memory Function

Stores 200 readings with date/time stamps.

Review memory: Press MEMORY button, use arrows to scroll.
User selection: Supports 2 users - select before measurement.
Guest Mode: Press and hold START/STOP for 3 seconds to enable.
Average calculation: Displays average of last 3 readings for selected user.
Clear memory: In SET mode, select "Clear All Memory."

WARNING! Clearing memory is permanent. Back up important readings.

Special Features

Irregular Heartbeat Detection: Icon appears if irregular rhythm detected during measurement. Hypertension Indicator: Warning symbol for systolic ≥135 or diastolic ≥85 mmHg. Morning Hypertension: Indicator for morning readings above threshold. Body Movement Detection: Alert if movement affects accuracy.

Care & Maintenance

Remove batteries before cleaning. Wipe with soft, dry cloth; do not use chemicals or immerse in water. Store in case when not in use. Replace cuff if damaged or leaking.

CAUTION! Do not disassemble unit. Avoid extreme temperatures and humidity.

Regulatory Information

FDA Cleared: KXXXXXX. CE Marked: Medical Device Directive 93/42/EEC. FCC Part 15: Class B digital device. Copyright © Omron Healthcare, Inc. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace batteries; check polarity.
Error E1	Cuff not attached	Connect cuff properly; ensure no leaks.
Error E2	Measurement error	Reapply cuff; remain still; retry.
Inconsistent readings	Improper cuff position	Ensure cuff at heart level; correct size.
Memory full	200 readings stored	Delete old readings or clear memory.
Irregular heartbeat icon	Possible arrhythmia	Consult healthcare provider if frequent.

Reset: Remove batteries for 5 minutes, then reinsert.

Service: 1-800-634-4350; www.omronhealthcare.com