Omron Model BP786N Instruction Manual

The Omron Model BP786N is an upper arm blood pressure monitor with IntelliSense technology, featuring a ComFit cuff, hypertension indicator, irregular heartbeat detector, multi-user memory (up to 100 readings per user), date/time stamp, WHO classification indicator, body movement detection, and AC adapter compatibility. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, ComFit cuff, AC adapter, storage case, instruction manual.

Installation & Setup

Unpack and inspect contents. Ensure all parts are present.

1. Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
2. Connect AC adapter (optional): Plug adapter into DC jack and wall outlet.
3. Set date and time: Press SET button, use arrow keys to adjust.
4. Attach cuff: Connect air plug to main unit until it clicks.

WARNING! Do not use if cuff is damaged. Keep away from children.

First-Time Use

Prepare for accurate measurement.

1. Rest for 5 minutes before measurement.
2. Sit comfortably with feet flat on floor, back supported.
3. Apply cuff to bare upper arm 1-2 cm above elbow.
4. Position cuff at heart level.
5. Press START/STOP to begin measurement.

CAUTION! Do not move or talk during measurement. Avoid taking measurements after eating, bathing, or exercising.

Specifications

• Measurement Method: Oscillometric
• Pressure Range: 0-299 mmHg
• Pulse Range: 40-180 beats per minute
• Memory: 100 readings x 2 users
• Cuff Size: 22-42 cm (arm circumference)
• Power Source: 4 AA batteries or AC adapter (6V DC)
• Display: LCD with backlight
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5%
• Operating Conditions: 10°C to 40°C, 30% to 85% humidity
• Storage Conditions: -20°C to 60°C, 10% to 95% humidity

Controls and Display

Front Panel: START/STOP button, SET button, UP/DOWN arrows, MEMORY button.

Display Symbols: User indicator (1/2), battery icon, date/time, systolic/diastolic pressure, pulse rate, hypertension indicator, irregular heartbeat symbol, body movement alert, WHO classification bar.

Settings Menu: Press SET to access date/time, user selection, memory review, unit selection (mmHg/kPa).

Taking Measurements

Follow proper procedure for accurate results.

1. Select user: Press SET, choose User 1 or User 2.
2. Apply cuff correctly: Ensure index line is within range marks.
3. Press START/STOP: Cuff inflates automatically.
4. Remain still: Keep arm relaxed at heart level.
5. Read results: Systolic, diastolic, and pulse display when complete.
6. Cuff deflates: Remove cuff after measurement.

Tip: Take measurements at same time each day for consistent tracking.

Memory Function

Stores and reviews previous readings.

1. View memory: Press MEMORY button to scroll through stored readings.
2. Check average: Display shows average of last 3 readings for current user.
3. Clear memory: In settings menu, select "Clear All Memory" option.
4. Date/Time stamp: Each reading includes measurement timestamp.

Note: Memory is maintained when batteries are replaced if done within 3 minutes.

Care & Maintenance

Unplug AC adapter and remove batteries before cleaning. Use soft, dry cloth only.

1. Clean cuff: Wipe with damp cloth, air dry completely.
2. Clean unit: Use dry cloth; avoid liquids.
3. Store properly: Keep in storage case in cool, dry place.
4. Replace batteries: When battery icon appears low.

CAUTION! Do not immerse in water. Do not use alcohol or solvents.

Regulatory Information

FDA Cleared: KXXXXXX. CE Marked: Medical Device Directive 93/42/EEC. Manufactured for Omron Healthcare, Inc. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Reset: Remove batteries for 3 minutes to reset device.

Service: 1-800-634-4350; www.omronhealthcare.com