Omron Model BP786 Manual

The Omron Model BP786 is an upper arm blood pressure monitor with IntelliSense technology for accurate, comfortable readings. It features a wide-range D-Ring cuff, hypertension indicator, irregular heartbeat detection, memory storage for multiple users, date/time display, and body movement detection. Powered by 4 AA batteries or AC adapter. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, D-Ring cuff, AC adapter, storage case, instruction manual.

Feature	Description
IntelliSense Technology	Automatically inflates to optimal pressure for comfortable measurement
D-Ring Cuff	Wide-range cuff (22-42 cm) for easy self-application
Hypertension Indicator	Displays color-coded indicator based on WHO classification
Irregular Heartbeat Detection	Detects and displays irregular heartbeat during measurement
Dual User Memory	Stores up to 100 readings per user (200 total)
Body Movement Detection	Alerts if movement is detected during measurement
Date/Time Display	Shows date and time with each reading
Average Reading	Calculates average of last 3 readings taken within 10 minutes
AC Adapter Port	For use with included AC adapter
START/STOP Button	Initiates and stops blood pressure measurement

Safety Precautions

Read all instructions before use. Not for use with infants or without prescription.

1. Do not use on injured or numb arm.
2. Do not use during dialysis or with intravenous infusion.
3. Consult physician before use if pregnant, have arrhythmia, or circulatory problems.
4. Keep away from children and pets.
5. Do not disassemble or modify unit.

WARNING! This device is not a substitute for professional medical diagnosis. Consult physician for interpretation of readings.

Setup and Preparation

Prepare device and yourself for accurate measurement.

1. Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
2. Apply cuff: Place cuff on bare upper arm 1-2 cm above elbow, align artery marker with brachial artery.
3. Secure cuff: Wrap cuff snugly, not too tight (should fit one finger underneath).
4. Position arm: Rest arm on table with cuff at heart level, palm up, feet flat on floor.
5. Set date/time: Press SET button, use arrow buttons to adjust, press SET to confirm.

CAUTION! Do not use on arm with medical device or injury. Ensure proper cuff placement.

Specifications

• Measurement Method: Oscillometric
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/minute
• Cuff Size: 22-42 cm (arm circumference)
• Memory: 100 readings per user (2 users total)
• Display: LCD with backlight
• Power Source: 4 AA batteries or AC adapter (included)
• Battery Life: Approximately 300 measurements
• Operating Conditions: Temperature: 10°C to 40°C, Humidity: 30% to 85% RH
• Storage Conditions: Temperature: -20°C to 60°C, Humidity: 10% to 95% RH
• Dimensions: 123mm (W) x 85mm (H) x 141mm (D)
• Weight: Approximately 340g (without batteries)

Controls and Display

Front Panel: START/STOP button, SET button, UP/DOWN arrows, USER button.

Display Symbols: User indicator (1/2), Memory indicator, Battery indicator, Heart symbol (pulse), Hypertension indicator (color bar), Date/Time, Systolic/Diastolic pressure, Pulse rate, Irregular heartbeat symbol, Body movement symbol, Average reading indicator.

Settings: Press SET to enter setup mode for date/time, user selection, memory review. Use UP/DOWN to navigate, SET to confirm.

Taking Measurements

For most accurate results, measure at same time daily.

1. Rest for 5 minutes before measurement.
2. Sit comfortably with back straight, feet flat.
3. Apply cuff correctly as described in Setup.
4. Press START/STOP button - unit inflates automatically.
5. Remain still and quiet during measurement.
6. Reading displays with systolic, diastolic, pulse rate.
7. Unit automatically stores reading in memory.
8. To turn off, press START/STOP again or wait 1 minute.

Tip: Avoid eating, smoking, exercising, or bathing 30 minutes before measurement.

Memory Function

Stores 100 readings per user with date/time stamp.

1. Select user: Press USER button to toggle between User 1 and User 2.
2. View memory: Press SET button, use arrows to scroll through stored readings.
3. Delete memory: In memory review mode, press and hold SET for 3 seconds to delete all readings for current user.
4. Average reading: Automatically calculates average of last 3 readings taken within 10 minutes.

Note: Memory is maintained when batteries are removed (internal backup).

Special Features

Hypertension Indicator: Color bar shows green (normal), yellow (mild), orange (moderate), red (severe) based on WHO guidelines.

Irregular Heartbeat Detection: Symbol appears if irregular heartbeat is detected during measurement. Consult physician if frequent.

Body Movement Detection: Symbol appears if movement is detected - measurement may be inaccurate. Remain still and retake.

Guest Mode: Take measurement without storing in memory by not selecting a user before measurement.

Care & Maintenance

Clean with soft, dry cloth. Do not use alcohol, benzene, or abrasive cleaners.

1. Cuff care: Wipe with damp cloth, air dry completely before storage.
2. Storage: Store in provided case in cool, dry place away from direct sunlight.
3. Battery replacement: Replace when battery symbol appears. Remove if not using for extended period.
4. Do not immerse in water or other liquids.

CAUTION! Do not wash cuff in washing machine or use bleach. Do not expose to extreme temperatures.

Regulatory Information

FDA Cleared: K number [insert specific K number]. CE Marked: Medical Device Directive 93/42/EEC. Manufactured for Omron Healthcare, Inc. Copyright © [year] Omron Healthcare, Inc. All rights reserved. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace all 4 AA batteries; ensure proper polarity.
Error E1	Cuff not properly attached	Check cuff connection; reattach securely.
Error E2	Measurement error	Reapply cuff correctly; remain still; retake measurement.
Error E3	Pulse too weak/irregular	Check cuff position; consult physician if frequent.
Inaccurate reading	Wrong cuff position/movement	Ensure cuff at heart level; remain still during measurement.
Memory full	100 readings stored	Delete old readings or switch to other user.
Unit won't turn off	Button stuck	Remove batteries for 1 minute; reinsert.

Reset: Remove batteries for 5 minutes to reset unit (memory preserved).

Service: 1-800-634-4350; www.omronhealthcare.com