Omron Model BP785 Manual

The Omron Model BP785 is an upper arm blood pressure monitor with IntelliSense technology for accurate, comfortable readings. It features a wide-range D-Ring cuff, hypertension detection, morning hypertension indicator, body movement detection, irregular heartbeat detection, dual-user memory (100 readings each), date/time display, WHO blood pressure classification indicator, and averaging of last three readings. Below are key sections for safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Package Contents 3. Setting Up Your Monitor 4. Specifications 5. Controls and Display 6. Taking a Measurement 7. Memory Function 8. Special Features 10. Care & Maintenance 11. Regulatory Information 12. Troubleshooting

Features at a Glance

Key components: Main unit, Wide-range D-Ring Cuff (22-42 cm), AC Adapter, Instruction Manual, Storage Case.

Feature	Description
IntelliSense Technology	Automatically inflates to optimal pressure for comfortable measurement
Dual-User Memory	Stores up to 100 readings for each of two users
Hypertension Detection	Alerts if systolic/diastolic readings are high
Morning Hypertension Indicator	Flags readings taken in the morning hypertension zone
Irregular Heartbeat Detection	Detects pulse irregularities during measurement
Body Movement Detection	Alerts if movement is detected during measurement
WHO Indicator	Displays blood pressure classification based on WHO guidelines
Average of Last 3 Readings	Calculates and displays average of last three measurements
Cuff Wrap Guide	Ensures proper cuff placement
Date & Time Stamp	Records measurement date and time for tracking

Package Contents

Unpack and verify all items are present.

Omron BP785 Blood Pressure Monitor (main unit)
Wide-range D-Ring Cuff (22-42 cm)
AC Adapter
Instruction Manual
Storage Case
Quick Start Guide

WARNING! Do not use if any components are damaged. Contact customer service for replacement.

Setting Up Your Monitor

Prepare monitor for first use.

Insert batteries: Open battery compartment, insert 4 AA batteries (not included) observing polarity.
Connect AC adapter: Plug into DC jack on side of unit and into wall outlet (optional).
Set date and time: Press SET button, use UP/DOWN to adjust values, press SET to confirm.
Attach cuff: Insert cuff tube connector into port on left side of unit until it clicks.

CAUTION! Use only specified AC adapter. Do not mix old and new batteries.

Specifications

Measurement Method: Oscillometric
Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/min
Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
Memory: 100 readings per user (2 users total)
Cuff Size: 22-42 cm (arm circumference)
Power Source: 4 AA batteries or AC adapter (included)
Battery Life: Approx. 300 measurements (alkaline batteries)
Display: LCD with backlight
Operating Conditions: Temperature: 10°C to 40°C, Humidity: 30% to 85% RH
Storage Conditions: Temperature: -20°C to 60°C, Humidity: 10% to 95% RH

Controls and Display

Front Panel: START/STOP button, SET button, UP/DOWN buttons, USER button.

Display Symbols: User 1/2 indicator, Memory full, Battery low, Heart symbol (pulse), Movement detection, Irregular heartbeat, Hypertension, Morning hypertension, WHO indicator, Average, Date/Time.

Settings: Date/Time, User selection, Memory review.

Taking a Measurement

For most accurate results, measure at same time each day.

Rest for 5 minutes before measuring.
Sit comfortably with feet flat on floor, back supported.
Wrap cuff on bare upper arm 1-2 cm above elbow with tube facing downward.
Position arm so cuff is at heart level.
Press USER button to select user (1 or 2).
Press START/STOP button to begin inflation.
Remain still and quiet during measurement.
Reading displays systolic, diastolic, and pulse.
Unit automatically stores reading in memory.

Tip: Avoid eating, smoking, exercising, or drinking caffeine 30 minutes before measurement.

Memory Function

Stores 100 readings per user with date/time stamp.

Review memory: Press and hold SET button for 3 seconds to enter memory mode.
Use UP/DOWN to scroll through readings.
Average display: Shows average of last 3 readings taken within last 10 minutes.
Clear memory: In memory mode, press and hold START/STOP for 3 seconds to clear current user's memory.

Note: Memory is retained when batteries are removed.

Special Features

Hypertension Detection: Displays symbol if systolic ≥135 mmHg or diastolic ≥85 mmHg. Morning Hypertension Indicator: Shows symbol if morning reading is in hypertension range. Irregular Heartbeat Detection: Displays symbol if irregular rhythm detected. Body Movement Detection: Shows symbol and may restart measurement if movement detected. WHO Indicator: Color-coded display shows optimal, normal, high normal, or hypertension ranges.

Care & Maintenance

Clean with soft, dry cloth. Do not immerse in water or use chemicals.

Remove batteries if not using for extended period.
Store in cool, dry place away from direct sunlight.
Replace cuff if it becomes damaged or cracked.
Clean cuff with mild soap and damp cloth if soiled; air dry completely.

CAUTION! Do not disassemble unit. No user-serviceable parts inside.

Regulatory Information

FDA Cleared: KXXXXXX. CE Marked: Meets European Medical Device Directive requirements. Manufactured for Omron Healthcare, Inc. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace all 4 batteries with new ones.
Error E1	Cuff not attached properly	Ensure cuff tube is fully inserted into unit.
Error E2	Cuff over-inflated	Remove cuff and restart measurement.
Error E3	Measurement error	Reposition cuff and ensure proper placement.
Inconsistent readings	Improper posture or movement	Rest 5 minutes, sit correctly, remain still during measurement.
Memory full	100 readings stored	Clear memory or review and record readings manually.
Battery drains quickly	Old batteries or backlight overuse	Use alkaline batteries; minimize backlight use.

Reset: Remove batteries and AC adapter for 1 minute, then reinsert.

Service: 1-800-634-4350; www.omronhealthcare.com