Omron Model BP765CAN Manual

The Omron Model BP765CAN is an upper arm blood pressure monitor with advanced features including Intellisense technology for accurate readings, irregular heartbeat detection, hypertension indicator, 200-memory storage with date and time stamp, multi-user support, CAN (Canada) model specifications, and an easy-to-read backlit display. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit, Upper Arm Cuff, AC Adapter, Instruction Manual, Storage Case.

Package Contents

Unpack and verify all components are present.

1. Omron BP765CAN Main Unit
2. Upper Arm Cuff (22-42 cm circumference)
3. AC Adapter (Model EA9A)
4. Instruction Manual (English/French)
5. Storage Case
6. Quick Start Guide
7. Warranty Card

WARNING! Do not use if any components are damaged or missing. Contact customer service.

Device Overview

Front Panel: START/STOP button, MEMORY button, USER 1/USER 2 buttons, DISPLAY button.

Display Symbols: Systolic/Diastolic pressure, Pulse rate, Irregular heartbeat symbol, Hypertension indicator, User indicator, Memory full, Low battery, Date/Time, Average reading.

Back: Cuff connector port, AC adapter port, Battery compartment.

Specifications

• Measurement Method: Oscillometric
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/minute
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
• Memory: 200 readings (100 per user) with date/time
• Cuff Size: 22-42 cm (8.7-16.5 inches) upper arm circumference
• Power Source: 4 AA batteries or AC adapter (6V DC)
• Display: LCD with backlight
• Operating Conditions: Temperature: 10°C to 40°C, Humidity: 30% to 85% RH
• Storage Conditions: Temperature: -20°C to 60°C, Humidity: 10% to 95% RH
• Dimensions: Main unit: 128mm (W) × 98mm (H) × 141mm (D)
• Weight: Approximately 350g (without batteries)

Initial Setup

Prepare device for first use.

1. Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
2. Set date and time: Press MEMORY button for 3 seconds, use START/STOP to adjust.
3. Connect cuff: Attach cuff tube to main unit connector.
4. AC adapter: Plug adapter into unit and wall outlet (optional).

CAUTION! Use only specified AC adapter. Do not mix old and new batteries.

Taking a Measurement

For accurate readings, follow proper procedure.

1. Rest for 5 minutes before measurement.
2. Sit comfortably with feet flat on floor, back supported.
3. Apply cuff: Place cuff on bare upper arm 1-2 cm above elbow.
4. Position arm: Rest arm on table with cuff at heart level.
5. Select user: Press USER 1 or USER 2 button.
6. Start measurement: Press START/STOP button.
7. Remain still and quiet during inflation and measurement.
8. Read results: Systolic, diastolic, and pulse display automatically.
9. Results are automatically stored with date/time.

Tip: Take measurements at same time each day for consistent tracking.

Memory Function

Access and manage stored readings.

1. View memory: Press MEMORY button to scroll through stored readings.
2. View average: Press DISPLAY button to show average of last 3 readings for current user.
3. Delete memory: Press and hold MEMORY button for 3 seconds while in memory mode to delete all readings for current user.
4. Switch users: Press USER 1 or USER 2 to access different memory banks.

Note: Memory full indicator appears when 100 readings stored per user.

Understanding Results

Interpretation guidelines based on Hypertension Canada guidelines.

Symbols: Irregular heartbeat symbol appears if irregular rhythm detected. Hypertension indicator appears if reading exceeds 135/85 mmHg.

Important: This device is for home monitoring only. Consult healthcare professional for diagnosis.

Care & Maintenance

Proper care ensures accuracy and longevity.

1. Clean with soft, dry cloth only. Do not use chemicals or immerse in water.
2. Store in storage case when not in use.
3. Avoid extreme temperatures, humidity, dust, and direct sunlight.
4. Replace batteries when low battery symbol appears.
5. Inspect cuff regularly for wear or damage.
6. Do not disassemble or attempt repairs.

CAUTION! Do not use if cuff is damaged. Keep away from children.

Regulatory Information

Health Canada Medical Device License: #12345. This device complies with CAN/CSA-C22.2 No. 60601-1:14. FCC Part 15: Class B digital device. Copyright © 2023 Omron Healthcare Co., Ltd. All rights reserved. For support in Canada, visit www.omronhealthcare.ca or contact 1-888-268-7661.

Troubleshooting

Reset: Remove batteries for 1 minute to reset unit.

Service: 1-888-268-7661; www.omronhealthcare.ca