Omron Model BP6350 Manual

The Omron Model BP6350 is an upper arm blood pressure monitor designed for home use, featuring IntelliSense technology for accurate and comfortable readings, a large LCD display with backlight, hypertension indicator, irregular heartbeat detection, memory storage for multiple users, date and time display, and AC adapter compatibility. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Setup and Preparation 4. Specifications 5. Controls and Display 6. Taking a Measurement 7. Memory Function 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main unit with LCD display, Arm cuff with D-ring, AC adapter, Storage case, Instruction manual.

Feature	Description
IntelliSense Technology	Automatically inflates to optimal pressure for comfortable measurement
Hypertension Indicator	Displays warning symbol if systolic/diastolic readings are high
Irregular Heartbeat Detection	Detects and displays symbol for irregular heartbeats during measurement
Memory Storage	Stores up to 100 readings with date and time for two users
Large LCD Display	Easy-to-read backlit screen with clear icons
Date & Time	Built-in clock for tracking measurement history
AC Adapter Port	For continuous power (adapter sold separately)
START/STOP Button	Initiates and stops measurement
MEMORY Button	Recalls stored readings
USER Button	Selects between User 1 and User 2 for memory

Safety Information

Read all instructions before use. Keep out of reach of children.

Do not use on infants, young children, or persons unable to express themselves.
Do not use during or immediately after physical exercise or bathing.
Consult your physician before use if you have arrhythmia, blood circulation problems, or other serious conditions.
Do not over-inflate cuff; follow instructions for proper placement.

WARNING! This device is for home use only, not for professional medical diagnosis. Always consult a physician for medical advice.

Setup and Preparation

Insert batteries or connect AC adapter; set date and time.

Install batteries: Open battery compartment, insert 4 AA batteries observing polarity.
Set date and time: Press and hold CLOCK button, use SET/+ buttons to adjust.
Apply cuff: Wrap cuff on bare upper arm, align artery marker with brachial artery.
Position arm: Rest arm on table with cuff at heart level, sit quietly for 5 minutes.

CAUTION! Ensure cuff is not twisted and fits snugly but not too tight. Remove tight clothing from arm.

Specifications

Measurement Method: Oscillometric (upper arm).
Pressure Range: 0-299 mmHg.
Pulse Range: 40-180 beats per minute.
Accuracy: Pressure: ±3 mmHg; Pulse: ±5% of reading.
Memory: 100 readings for two users (200 total).
Display: LCD with backlight.
Power Source: 4 AA batteries or AC adapter (6V DC, 600mA).
Operating Conditions: 50°F to 104°F (10°C to 40°C), 30-85% humidity.
Cuff Circumference: 9-17 inches (22-42 cm).

Controls and Display

Front Panel: START/STOP, MEMORY, USER, CLOCK, SET/+ buttons. Display Icons: Systolic/Diastolic, Pulse, User 1/2, Memory, Hypertension, Irregular Heartbeat, Battery, Date/Time.

Button Functions: START/STOP begins measurement; MEMORY recalls stored data; USER selects user profile; CLOCK sets date/time; SET/+ adjusts values.

Display Readings: Shows systolic pressure (top), diastolic pressure (middle), pulse rate (bottom). Hypertension indicator appears if systolic ≥135 or diastolic ≥85. Irregular heartbeat symbol flashes if detected.

Taking a Measurement

Ensure proper cuff placement and relaxed posture.

Sit quietly with feet flat on floor, back supported.
Wrap cuff on left arm (unless instructed otherwise by physician).
Press START/STOP; cuff inflates automatically.
Remain still and quiet during measurement.
Reading displays with pulse; cuff deflates automatically.
Result is stored automatically for selected user.
Wait at least 3 minutes before next measurement.

Tip: Avoid talking or moving during measurement for most accurate results.

Memory Function

Stores up to 100 readings per user with date and time.

Select user: Press USER button to choose User 1 or User 2 (icon appears).
View memory: Press MEMORY button to scroll through stored readings.
Average reading: Display shows average of last three readings for current user.
Clear memory: Press and hold MEMORY for 3 seconds to delete all readings for selected user.

Note: Memory is retained when batteries are removed; date/time reset if batteries depleted.

Care & Maintenance

Clean with soft, dry cloth; do not immerse in water. Store in cool, dry place.

Cuff care: Wipe with damp cloth if soiled; air dry completely.
Battery care: Replace batteries when low battery icon appears.
Storage: Keep in provided case when not in use; avoid extreme temperatures.
Do not disassemble or attempt repairs.

CAUTION! Do not use alcohol, benzene, or abrasive cleaners. Do not expose to direct sunlight or moisture.

Regulatory Information

FDA Cleared: For over-the-counter home use. FCC Part 15: Class B digital device; complies with interference limits. CE Mark: Meets European medical device directives. Manufacturer: Omron Healthcare, Inc. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace with fresh AA batteries; ensure proper polarity.
Error E1 displayed	Cuff not attached properly	Check cuff connection; reattach securely.
Error E2 displayed	Cuff over-inflated	Deflate cuff completely; restart measurement.
Inconsistent readings	Improper posture or movement	Sit still with arm at heart level; avoid talking.
Memory not storing	Memory full or user not selected	Clear memory or select correct user before measuring.
Irregular heartbeat symbol	Possible arrhythmia detected	Consult physician if symbol appears frequently.

Reset: Remove batteries for 1 minute to reset device.

Service: 1-800-634-4350; www.omronhealthcare.com