Omron Intellisense Manual BP652

The Omron Intellisense BP652 is an upper arm blood pressure monitor featuring IntelliSense technology for accurate and comfortable readings. It includes a pre-formed D-Ring cuff, hypertension indicator, irregular heartbeat detection, 90-reading memory with date and time stamp, and body movement detection. Below are key sections for safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Safety Information 3. Getting Started 4. Specifications 5. Controls and Display 6. Taking a Measurement 7. Memory Function 8. Understanding Your Readings 9. Care & Maintenance 10. Troubleshooting 11. Warranty Information

Features at a Glance

Key components: Main unit with LCD display, pre-formed D-Ring cuff, AC adapter port, battery compartment, and START/STOP button.

Feature	Description
IntelliSense Technology	Automatically inflates to optimal pressure for comfortable measurement
D-Ring Cuff	Pre-formed cuff for easy self-application
Hypertension Indicator	Displays warning symbol if reading exceeds WHO guidelines
Irregular Heartbeat Detection	Detects and displays irregular heartbeat during measurement
90-Memory with Date/Time	Stores readings with timestamp for tracking
Body Movement Detection	Alerts if movement is detected during measurement
Average Reading	Calculates average of last 3 readings taken within 10 minutes
AC Adapter Port	For power via included adapter (optional)
Battery Operation	Uses 4 AA batteries (included)
Automatic Power Off	Conserves battery life

Safety Information

Read all instructions before use. For accurate readings and safe operation.

Do not use on infants, young children, or persons unable to express themselves.
Consult physician before use if you have arrhythmia, other heart conditions, or are pregnant.
Do not use in high humidity environments or near flammable gases.
Remove cuff immediately after measurement to avoid restricting blood flow.

WARNING! This device is for home use only, not for professional medical diagnosis. Always consult your doctor about your blood pressure.

Getting Started

Prepare the device for first use.

Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
Apply cuff: Wrap cuff on bare upper arm 1-2 cm above elbow. Ensure air tube aligns with artery.
Position: Sit comfortably with back straight, feet flat, arm supported at heart level.
Power on: Press START/STOP button to begin.

CAUTION! Do not over-tighten cuff. Ensure cuff is not twisted.

Specifications

Measurement Method: Oscillometric
Pressure Range: 0-299 mmHg
Pulse Range: 40-180 beats per minute
Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
Memory: 90 readings with date and time
Cuff Circumference: 22-42 cm (9-17 inches)
Power Source: 4 x AA batteries or AC adapter (6V DC, 600mA)
Operating Conditions: 10°C to 40°C, 30% to 85% RH
Storage Conditions: -20°C to 60°C, 10% to 95% RH
Dimensions: Approx. 123mm (W) x 85mm (H) x 141mm (D)
Weight: Approx. 350g (without batteries)

Controls and Display

Front Panel: START/STOP button, MEMORY button, SET button. Display Symbols: Systolic/Diastolic pressure, Pulse rate, Hypertension indicator, Irregular heartbeat symbol, Body movement symbol, Memory index, Date/Time, Battery indicator, Average reading icon.

Button Functions: START/STOP: Begin/stop measurement. MEMORY: Recall stored readings. SET: Set date/time and user options.

Display Layout: Large digits for systolic/diastolic readings, smaller digits for pulse rate, icons for special indicators along top and bottom edges.

Taking a Measurement

Follow proper procedure for accurate results.

Rest for 5 minutes before measuring.
Sit correctly with arm supported at heart level.
Apply cuff properly as described in Getting Started.
Press START/STOP button. Cuff will inflate automatically.
Remain still and quiet during measurement.
Reading displays when complete. Cuff deflates automatically.
Record reading if desired, or it will be stored automatically.
Remove cuff after measurement.

Tip: Take measurements at same time each day for consistent tracking.

Memory Function

Stores 90 readings with date and time.

View memory: Press MEMORY button to cycle through stored readings.
Memory index: Shows current reading number (e.g., 01/90).
Average reading: Automatically calculates average of last 3 readings taken within 10 minutes.
Clear memory: Hold SET button for 3 seconds while in memory mode (all data erased).

Note: When memory is full, oldest reading is overwritten by newest.

Understanding Your Readings

Interpret your blood pressure readings correctly.

Category	Systolic (mmHg)	Diastolic (mmHg)
Normal	Less than 120	and Less than 80
Prehypertension	120-139	or 80-89
Hypertension Stage 1	140-159	or 90-99
Hypertension Stage 2	160 or higher	or 100 or higher

Symbols: Hypertension indicator appears if reading exceeds 135/85 mmHg. Irregular heartbeat symbol appears if irregular rhythm detected. Body movement symbol appears if excessive movement detected.

Important: Single reading not diagnostic. Track trends over time and consult physician.

Care & Maintenance

Proper care ensures accuracy and longevity.

Clean cuff with mild soap and damp cloth only. Do not immerse in water.
Clean main unit with dry soft cloth only.
Store in cool, dry place away from direct sunlight.
Remove batteries if not using for extended period.
Replace batteries when low battery symbol appears.

CAUTION! Do not use alcohol, benzene, thinner, or abrasive cleaners. Do not disassemble unit.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace all 4 batteries with new ones.
Error E1 displayed	Cuff not attached properly	Check cuff connection to unit; reattach securely.
Error E2 displayed	Cuff pressure error	Ensure cuff is not twisted; retake measurement.
Error E3 displayed	Measurement error	Movement during measurement; remain still and retry.
Inconsistent readings	Incorrect positioning	Ensure arm at heart level; rest before measuring.
Cuff doesn't inflate	Air leak or blockage	Check tube connections; ensure air valve not blocked.
Memory not working	Batteries very low	Replace batteries; memory may be lost if completely dead.

Reset: Remove batteries for 1 minute, then reinsert to reset unit.

Warranty Information

Omron Healthcare, Inc. warrants this device against defects in materials and workmanship for 5 years from date of purchase. Warranty covers repair or replacement at Omron's discretion. Not covered: Damage from misuse, accident, unauthorized repair, commercial use, or normal wear. Proof of purchase required. For service, contact Omron Healthcare Customer Support at 1-800-634-4350 or visit www.omronhealthcare.com.

FCC Notice: This device complies with Part 15 of FCC Rules. Operation subject to conditions: (1) device must not cause harmful interference, (2) device must accept any interference received.