Omron Intellisense BP7350 Manual

The Omron Intellisense BP7350 is an upper arm blood pressure monitor featuring Intellisense technology for accurate, comfortable readings, irregular heartbeat detection, hypertension indicator, body movement detection, 90 memory storage with date and time stamp, and a large backlit display. It is clinically validated and designed for easy home use. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with backlit LCD display, Intellisense cuff, AC adapter, storage case, instruction manual.

Package Contents

Unpack and verify all components are present.

1. Omron BP7350 Blood Pressure Monitor (main unit)
2. Intellisense Wide-Range Cuff (22-42 cm)
3. AC Adapter
4. Storage Case
5. Instruction Manual
6. Warranty Card

WARNING! Do not use if any components are damaged or missing. Contact customer service for replacement.

Device Overview

Familiarize yourself with the device controls and display symbols.

1. Display: Shows systolic/diastolic pressure, pulse, date, time, and icons.
2. START/STOP Button: Starts and stops measurement.
3. MEMORY Button: Accesses memory recall function.
4. SET Button: Sets date, time, and user settings.
5. Cuff Port: Connects cuff tube to main unit.
6. AC Adapter Jack: For AC power connection.
7. Battery Compartment: Holds 4 AA batteries (optional).

CAUTION! Keep device dry and away from extreme temperatures.

Specifications

• Measurement Method: Oscillometric
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/min
• Cuff Size: 22-42 cm (wide-range cuff included)
• Memory: 90 readings with date and time
• Power Source: AC adapter (included) or 4 AA batteries
• Display: Backlit LCD with large digits
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
• Special Features: Intellisense, irregular heartbeat detection, hypertension indicator, body movement detection
• Operating Conditions: Temperature: 10°C to 40°C, Humidity: 30% to 85% RH
• Storage Conditions: Temperature: -20°C to 60°C, Humidity: 10% to 95% RH

Preparation & Cuff Application

Proper preparation ensures accurate measurements.

1. Rest for 5 minutes before measurement.
2. Sit in a chair with feet flat on floor and back supported.
3. Place cuff on bare upper arm 1-2 cm above elbow.
4. Position cuff tube over brachial artery (center of arm).
5. Secure cuff snugly but not too tight (should fit one finger underneath).
6. Rest arm on table with cuff at heart level.
7. Avoid talking or moving during measurement.

Tip: Measure at the same time each day for consistent tracking.

Taking a Measurement

Follow these steps for accurate blood pressure reading.

1. Insert cuff tube into cuff port on main unit.
2. Press START/STOP button to begin.
3. Cuff inflates automatically to optimal pressure.
4. Remain still and quiet during measurement.
5. Results display systolic, diastolic pressure, and pulse rate.
6. Hypertension indicator appears if readings are high.
7. Irregular heartbeat symbol appears if detected.
8. Measurement automatically stores in memory.
9. Press START/STOP to turn off device.

WARNING! Do not inflate cuff when not wrapped around arm.

Memory Function

Device stores 90 readings with date and time.

1. Press MEMORY button to recall stored readings.
2. Use arrow buttons to scroll through memory.
3. Display shows reading number, date, time, systolic/diastolic, pulse.
4. Press SET button to delete individual readings.
5. To clear all memory: Hold SET button for 3 seconds while in memory mode.
6. Average function: Automatically calculates average of last 3 readings taken within 10 minutes.

Note: Memory is maintained when changing batteries or unplugging AC adapter.

Intellisense Technology

Omron's exclusive technology for comfortable, accurate measurements.

How it works: Monitors pressure changes during inflation to determine optimal inflation level for each user, avoiding over-inflation.

Benefits: More comfortable measurement, faster readings, reduced risk of inaccurate measurements due to excessive pressure.

Detection Features: - Irregular Heartbeat: Detects pulse irregularities during measurement - Body Movement: Alerts if movement affects accuracy - Cuff Fit Detection: Ensures proper cuff application

Care & Maintenance

Proper care ensures device longevity and accuracy.

1. Clean cuff with mild soap and damp cloth; air dry completely.
2. Wipe main unit with dry, soft cloth.
3. Do not immerse in water or use harsh chemicals.
4. Store in provided case when not in use.
5. Replace batteries when low battery icon appears.
6. Have device accuracy checked annually by authorized service center.
7. Replace cuff if it becomes damaged or stiff.

CAUTION! Never wash cuff in washing machine or use bleach.

Regulatory Information

FDA Cleared: Medical device cleared by US Food and Drug Administration. CE Marked: Complies with European Medical Device Directive. Clinical Validation: Validated according to ANSI/AAMI/ISO 81060-2:2013 protocol. Manufactured by Omron Healthcare Co., Ltd. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Reset: Remove batteries and AC adapter for 1 minute, then reconnect.

Service: 1-800-634-4350; www.omronhealthcare.com