Omron Intellisense Blood Pressure Manual

The Omron Intellisense Blood Pressure Monitor is a clinically validated, automatic upper-arm device featuring Intellisense technology for accurate and comfortable readings, irregular heartbeat detection, hypertension indicator, memory storage for multiple users, body movement detection, and a large LCD display with date/time function. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Precautions 3. Parts Identification 4. Initial Setup 5. Taking a Measurement 6. Understanding Results 7. Memory Function 8. Care & Maintenance 9. Error Messages 10. Specifications 11. Troubleshooting

Features at a Glance

Key components: Main Unit, Cuff, AC Adapter, Instruction Manual, Storage Case.

Feature	Description
Intellisense Technology	Automatically inflates to optimal pressure for comfort and accuracy
Irregular Heartbeat Detection	Detects and displays irregular heartbeat during measurement
Hypertension Indicator	Displays warning symbol if reading is in hypertension range
Dual User Memory	Stores up to 100 readings for each of two users
Body Movement Detection	Alerts if movement is detected during measurement
Large LCD Display	Shows systolic/diastolic pressure, pulse, date, and time
Date/Time Function	Automatic date and time stamp for each reading
Cuff Wrap Guide	Indicates proper cuff placement
AC Adapter Port	For continuous power operation
START/STOP Button	Initiates and stops measurement

Safety Precautions

Read all instructions before use.

Do not use on infants, children, or persons unable to express themselves.
Consult physician before use if you have arrhythmia, pre-eclampsia, or other circulatory disorders.
Do not use during or immediately after physical exercise or bathing.
Do not modify or disassemble the device.

WARNING! This device is not a substitute for professional medical diagnosis. Always consult your physician about your blood pressure.

Parts Identification

Front Panel: LCD Display, START/STOP Button, MEMORY Button, USER Button, SET Button.

Display Symbols: Systolic Pressure, Diastolic Pressure, Pulse Rate, Irregular Heartbeat Symbol, Hypertension Indicator, User Indicator, Memory Full, Low Battery, Body Movement Detection, Date/Time.

Side/Rear: AC Adapter Jack, Cuff Connector Port, Battery Compartment.

Initial Setup

Power on device; set date and time.

Insert batteries: Open battery compartment, insert 4 AA batteries matching polarity.
Set date/time: Press SET button, use START/STOP to adjust values, press SET to confirm.
Connect cuff: Plug cuff tube into connector port until it clicks.
Test operation: Press START/STOP to ensure display activates.

CAUTION! Use only specified AC adapter. Do not mix old and new batteries.

Taking a Measurement

For most accurate results, measure at the same time each day.

Sit comfortably: Rest for 5 minutes before measuring.
Apply cuff: Place cuff on bare upper arm 1-2 cm above elbow, align artery marker with brachial artery.
Position arm: Rest arm on table with cuff at heart level.
Start measurement: Press START/STOP button, remain still and quiet.
Read results: Display will show systolic, diastolic, and pulse readings.
Power off: Device turns off automatically after 1 minute.

Tip: Avoid talking or moving during measurement.

Understanding Results

Systolic Pressure: Pressure when heart contracts (upper number).
Diastolic Pressure: Pressure when heart relaxes (lower number).
Pulse Rate: Number of heartbeats per minute.
Irregular Heartbeat Symbol: Appears if irregular rhythm detected.
Hypertension Indicator: Appears if reading exceeds 135/85 mmHg.
Body Movement Symbol: Appears if excessive movement detected.

Refer to blood pressure classification chart in manual for normal/elevated/hypertension ranges.

Memory Function

Stores readings with date and time for two users (User A and User B).

Select user: Press USER button to toggle between User A and User B.
View memory: Press MEMORY button to scroll through stored readings.
Clear memory: Hold MEMORY button for 3 seconds until display shows "0".
Average reading: Device calculates average of last 3 readings for selected user.

Note: Memory is retained when batteries are replaced.

Care & Maintenance

Clean with soft, dry cloth only. Do not use water, solvents, or abrasive cleaners.

Cuff care: Wipe with damp cloth, air dry completely before storage.
Storage: Keep in cool, dry place away from direct sunlight and extreme temperatures.
Batteries: Replace when low battery symbol appears.
Inspection: Check cuff and tubing regularly for cracks or damage.

CAUTION! Do not immerse device in water. Do not autoclave or sterilize.

Error Messages

Display	Meaning	Action
E1	Cuff not properly attached	Reconnect cuff securely
E2	Measurement error	Remain still and retry
E3	Pulse rate out of range	Check placement and retry
E4	Excessive movement	Keep arm still and retry
E5	Pressure too high	Relax and retry later
Lo	Low battery	Replace batteries

Specifications

Measurement Method: Oscillometric
Pressure Range: 0-299 mmHg
Pulse Range: 40-180 beats/minute
Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
Memory: 100 readings x 2 users
Power Source: 4 AA batteries or AC adapter (optional)
Battery Life: Approximately 300 measurements
Cuff Size: 22-42 cm (9-17 inches) circumference
Dimensions: Main unit: 135mm x 105mm x 65mm
Weight: Approximately 400g (without batteries)

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace all batteries with new ones
Inaccurate reading	Improper cuff placement	Reposition cuff at heart level
Error during measurement	Movement or talking	Remain still and silent, retry
Cuff won't inflate	Tube not connected	Check cuff connection
Memory not working	Memory full	Clear memory or switch user
Irregular heartbeat symbol	Arrhythmia detected	Consult physician if frequent

Reset: Remove batteries for 1 minute to reset device.

Service: For service, contact Omron Healthcare at 1-800-634-4350 or visit www.omronhealthcare.com