Omron HEM 7361T Manual

The Omron HEM 7361T is an advanced, clinically validated upper arm blood pressure monitor with IntelliWrap™ Cuff technology for accurate positioning, irregular heartbeat detection, hypertension indicator, and memory storage for two users. It features a large, easy-to-read display, one-touch operation, and compatibility with the Omron Connect app for data tracking. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with display, IntelliWrap™ Cuff (22-42 cm), AC adapter, instruction manual, and storage case.

Feature	Description
IntelliWrap™ Cuff	Pre-formed cuff for easy, correct placement
Irregular Heartbeat Detection	Detects and displays irregular heartbeat during measurement
Hypertension Indicator	Displays symbol if reading is in hypertensive range
Dual User Memory	Stores up to 100 readings per user (200 total)
One-Touch Operation	Simple START/STOP button for easy use
Large Display	Backlit LCD with clear systolic/diastolic/pulse readings
Omron Connect Compatibility	Syncs data via Bluetooth to smartphone app
Automatic Power Off	Conserves battery life
Date & Time Stamp	Records measurement date and time
AVG (Average) Mode	Displays average of last 3 readings taken within 10 minutes

Package Contents

Unpack and verify all items are present.

1. Omron HEM 7361T Blood Pressure Monitor (main unit).
2. IntelliWrap™ Cuff (22-42 cm).
3. AC Adapter.
4. Instruction Manual (this document).
5. Storage Case.
6. Quick Start Guide.

WARNING! Do not use if any components are damaged. Contact customer service.

Device Overview

Front Panel: START/STOP button, Memory button, User Select button (I/II), Display.

Display Icons: Systolic Pressure, Diastolic Pressure, Pulse Rate, Irregular Heartbeat Symbol, Hypertension Indicator, User Indicator, Memory Full, Bluetooth, Battery Level, Date/Time.

Rear: Cuff port, AC adapter port, battery compartment (4xAA).

Specifications

• Measurement Method: Oscillometric.
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/min.
• Cuff Size: 22-42 cm (IntelliWrap™).
• Memory: 100 readings per user (2 users).
• Power Source: AC Adapter or 4xAA batteries.
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading.
• Display: Backlit LCD.
• Connectivity: Bluetooth Low Energy (BLE).
• Operating Conditions: 10°C to 40°C, 15% to 85% RH.
• Storage Conditions: -20°C to 60°C, 10% to 95% RH.

Initial Setup

Power on device; set date/time.

1. Insert batteries or connect AC adapter.
2. Press START/STOP to turn on.
3. Set date and time using Memory and User buttons (refer to manual).
4. Select User I or II for personalized memory.
5. Install Omron Connect app on smartphone and pair via Bluetooth.

CAUTION! Ensure cuff is not wrapped during initial setup. Sit quietly for 5 minutes before first measurement.

Taking a Measurement

For accurate results, follow these steps carefully.

1. Sit comfortably with back supported, feet flat on floor.
2. Rest arm on table with palm up, cuff at heart level.
3. Wrap IntelliWrap™ Cuff around bare upper arm (1-2 cm above elbow).
4. Press START/STOP. Cuff inflates automatically.
5. Remain still and quiet until measurement completes.
6. Readings display: Systolic, Diastolic, Pulse.
7. Symbols appear for irregular heartbeat or hypertension.
8. Device stores reading automatically for selected user.
9. Press START/STOP again to turn off, or it powers off automatically.

Tip: Take measurements at same time daily for consistent tracking.

Memory Function

View and manage stored readings.

1. Press MEMORY button to enter memory mode.
2. Use User button to select User I or II.
3. Press START/STOP to scroll through readings (most recent first).
4. Hold MEMORY for 3 seconds to delete all readings for current user.
5. AVG mode: Automatically calculates average of last 3 readings taken within 10 minutes.

Note: Memory Full icon appears when 100 readings are stored for a user.

Omron Connect App

Sync data for tracking and sharing with healthcare provider.

1. Download "Omron Connect" app from Apple App Store or Google Play.
2. Enable Bluetooth on smartphone.
3. Open app and follow pairing instructions.
4. After measurement, data syncs automatically (Bluetooth icon lights).
5. View trends, charts, and export data from app.

Compatibility: Requires iOS 10.0+ or Android 5.0+.

Care & Maintenance

Unplug or remove batteries before cleaning. Use soft, dry cloth only.

1. Clean cuff with mild soap and damp cloth; air dry completely.
2. Do not immerse unit in water or use abrasive cleaners.
3. Store in provided case in cool, dry place.
4. Replace batteries when low battery icon appears.
5. Use only specified AC adapter.

CAUTION! Do not disassemble or attempt repairs. No user-serviceable parts inside.

Regulatory Information

FDA Cleared: KXXXXXX. This device complies with Part 15 of FCC Rules. CE Marked. Manufactured for Omron Healthcare, Inc. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries/power	Replace batteries; ensure AC adapter is connected securely.
Error Code E1	Cuff not wrapped correctly	Rewrap cuff; ensure it's snug but not too tight.
Error Code E2	Irregular pulse detected	Remain still and retry; consult physician if frequent.
Bluetooth not connecting	Distance/pairing	Ensure device within 3 ft; re-pair in app settings.
Inconsistent readings	Movement/position	Sit still with cuff at heart level; avoid talking.
Memory full	100 readings stored	Delete old readings via Memory function.
Cuff does not inflate	Air leak/blockage	Check cuff tube connections; ensure cuff is not twisted.

Reset: Remove batteries for 5 minutes to reset device.

Service: 1-800-634-4350; www.omronhealthcare.com