Omron HEM 7211 Manual

The Omron HEM 7211 is an automatic upper arm blood pressure monitor designed for home use. It features IntelliSense technology for accurate and comfortable measurement, a large LCD display with backlight, hypertension indicator, irregular heartbeat detection, memory storage for multiple users, and body movement detection. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit, Arm cuff, AC adapter, Instruction manual, Storage case.

Feature	Description
IntelliSense Technology	Automatically inflates to optimal pressure for comfortable measurement
Hypertension Indicator	Displays warning symbol if systolic/diastolic readings are high
Irregular Heartbeat Detection	Detects and displays symbol for irregular heartbeats during measurement
Memory Function	Stores up to 60 readings with date and time for two users
Body Movement Detection	Alerts if excessive movement is detected during measurement
Large LCD with Backlight	Easy-to-read display for day or night use
Cuff Wrap Guide	Indicates proper cuff placement for accurate results
Automatic Power Off	Conserves battery life by turning off after 2 minutes of inactivity
Date/Time Display	Shows current date and time with stored readings
WHO Indicator	Color-coded bar graph shows blood pressure classification

Safety Information

Read all instructions before use. Consult physician for proper monitoring.

1. Do not use on infants, children, or persons unable to express themselves.
2. Do not use during dialysis or if you have pre-eclampsia (consult doctor).
3. Do not use on injured or sore arm.
4. Do not modify cuff or tubing.
5. Keep away from electromagnetic fields (microwaves, cell phones).

WARNING! This device is for home monitoring only, not for diagnosis. Always follow your doctor's instructions.

Parts Identification

Front Panel: START/STOP button, MEMORY button, USER button, LCD display. Cuff: Arm tube, air tube, metal D-ring, cuff wrap guide.

1. LCD Display: Shows systolic/diastolic pressure, pulse, date/time, user indicator, memory index.
2. START/STOP Button: Starts and stops measurement.
3. MEMORY Button: Recalls stored readings.
4. USER Button: Selects User 1 or User 2 for memory storage.
5. Cuff: Connects to main unit via air tube.

NOTE: Ensure cuff is properly connected before measurement.

Specifications

• Measurement Method: Oscillometric method.
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/minute.
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading.
• Memory: 60 readings for two users (120 total).
• Cuff Size: Fits arm circumference 22-42 cm (9-17 inches).
• Power Source: 4 AA batteries or AC adapter (included).
• Operating Conditions: Temperature: 10°C-40°C, Humidity: 30%-85% RH.
• Dimensions: Main unit: 135mm (W) × 119mm (H) × 121mm (D).
• Weight: Approximately 430g (without batteries).

Initial Setup

Insert batteries or connect AC adapter. Set date and time.

1. Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
2. AC adapter: Connect to DC jack on side of unit (use only supplied adapter).
3. Set date/time: Press and hold MEMORY button for 3 seconds, use START/STOP to adjust.
4. Attach cuff: Connect air tube to main unit until it clicks.

CAUTION! Use only specified batteries and adapter. Incorrect power source may damage device.

Taking a Measurement

For most accurate results, measure at same time each day.

1. Rest for 5 minutes before measurement. Avoid eating, smoking, or exercise 30 minutes prior.
2. Sit comfortably with feet flat on floor, back supported.
3. Wrap cuff on bare upper arm 1-2 cm above elbow with tube facing down.
4. Position cuff at heart level. Press START/STOP button.
5. Remain still and quiet during inflation and measurement.
6. Results display automatically. Unit deflates completely.
7. Press START/STOP to turn off or wait for auto power-off.

Tip: Take 2-3 readings 1-2 minutes apart and record the average.

Understanding Results

LCD displays systolic pressure (higher number), diastolic pressure (lower number), and pulse rate.

Symbols: Hypertension indicator (if reading exceeds 135/85 mmHg), Irregular heartbeat symbol, Body movement symbol, User indicator (1 or 2), Memory index number.

WHO Classification Bar Graph: - Green: Normal (below 120/80) - Yellow: Prehypertension (120-139/80-89) - Orange: Hypertension Stage 1 (140-159/90-99) - Red: Hypertension Stage 2 (160+/100+)

Memory Function

Stores 60 readings per user with date and time.

1. Select user: Press USER button to choose User 1 or User 2.
2. Automatic storage: After measurement, reading is stored automatically for selected user.
3. Recall readings: Press MEMORY button to view stored readings. Press repeatedly to scroll.
4. Clear memory: Press and hold USER and MEMORY buttons simultaneously for 3 seconds.

NOTE: Memory is maintained when batteries are replaced if done within 3 minutes.

Care & Maintenance

Clean with soft, dry cloth. Do not immerse in water or use chemicals.

1. Store in cool, dry place away from direct sunlight.
2. Remove batteries if not using for extended period.
3. Check cuff periodically for wear or damage.
4. Clean cuff with mild soap and damp cloth if soiled. Air dry completely.
5. Avoid bending air tube sharply or pulling forcefully.

CAUTION! Do not disassemble or attempt repairs. Contact authorized service center.

Regulatory Information

CE marked: Complies with Medical Device Directive 93/42/EEC. FDA cleared for over-the-counter home use. This device complies with Part 15 of FCC Rules. Copyright © Omron Healthcare, Inc. All rights reserved. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace all batteries or use AC adapter.
Error E1 displayed	Cuff not wrapped properly	Rewrap cuff correctly and restart measurement.
Error E2 displayed	Excessive movement	Remain still and retry measurement.
Error E3 displayed	Pressure over 300 mmHg	Consult physician; do not use device.
Inconsistent readings	Improper posture or timing	Follow measurement instructions precisely; rest before measuring.
Memory not working	Batteries removed too long	Replace batteries within 3 minutes to preserve memory.
Cuff doesn't inflate	Air leak or blockage	Check connections; ensure tube not kinked.

Reset: Remove batteries and AC adapter for 5 minutes, then reinsert.

Service: 1-800-634-4350; www.omronhealthcare.com