Omron HEM 712C Instruction Manual

The Omron HEM 712C is an automatic upper arm blood pressure monitor with IntelliSense technology for comfortable inflation, a large LCD display with backlight, body movement detection, hypertension indicator, irregular heartbeat detector, and memory storage for up to 30 readings with date and time stamp. It features one-touch operation, adjustable cuff, and is clinically validated for accuracy. Below are key sections for safety, features, setup, measurement, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, Arm Cuff with D-Ring, AC Adapter, Instruction Manual, Storage Case.

Safety Precautions

Read all instructions before use. For personal home use only.

1. Do not use on infants, children, or persons who cannot express themselves.
2. Do not use during or immediately after physical exercise or bathing.
3. Do not wrap cuff over clothing; apply directly to bare upper arm.
4. Consult your physician for interpretation of readings and treatment decisions.
5. Keep device away from electromagnetic fields (microwaves, cell phones).

WARNING! This device is not a treatment device. Do not adjust medication based solely on monitor readings.

Parts Identification

Front View: LCD Display, START/STOP Button, Memory Button. Side: AC Adapter Jack. Cuff: Air Tube, D-Ring, Marker Line.

1. LCD Display: Shows systolic/diastolic pressure, pulse, icons.
2. START/STOP Button: Powers on and starts measurement.
3. Memory Button (M): Recalls stored measurements.
4. Air Tube Connector: Connects cuff to monitor.
5. Cuff with D-Ring: Wraps around upper arm.

CAUTION! Do not bend or kink the air tube. Ensure connector is fully inserted.

Specifications

• Measurement Method: Oscillometric.
• Measurement Range: Pressure: 0-299 mmHg; Pulse: 40-180 beats/min.
• Accuracy: Pressure: ±3 mmHg; Pulse: ±5% of reading.
• Memory: 30 readings with date/time stamp.
• Cuff Size: 22-32 cm arm circumference.
• Power Supply: 4 x 1.5V AA batteries or 6V DC adapter.
• Operating Conditions: 10°C to 40°C, 30% to 85% humidity.
• Storage Conditions: -20°C to 60°C, 10% to 95% humidity.
• Dimensions: Approx. 121mm (W) x 87mm (H) x 141mm (D).
• Weight: Approx. 295g (without batteries).

Initial Setup

Prepare device for first use.

1. Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
2. Connect cuff: Plug air tube firmly into monitor connector.
3. Set date/time: Press and hold START/STOP for 3 seconds, use M button to adjust.
4. Apply cuff: Position cuff on bare upper arm with tube facing downward.

Tip: For most accurate results, rest for 5 minutes before first measurement.

Taking a Measurement

Follow these steps for accurate readings.

1. Sit comfortably with back straight, feet flat on floor.
2. Place cuff on left upper arm (unless instructed otherwise).
3. Position cuff so bottom edge is 1-2 cm above elbow.
4. Ensure air tube runs down center of arm.
5. Secure cuff snugly using D-Ring.
6. Rest arm on table with palm up, cuff at heart level.
7. Press START/STOP button to begin measurement.
8. Remain still and quiet until measurement completes.
9. Readings display automatically; device powers off after 1 minute.

WARNING! Do not inflate cuff without it properly positioned on arm.

Understanding the Display

LCD shows measurement results and status icons.

Memory Function

Stores up to 30 readings with date and time.

1. View memory: Press M button to recall stored readings.
2. Scroll: Press M repeatedly to cycle through all stored readings.
3. Average: Device automatically calculates average of last 3 readings.
4. Clear memory: Remove batteries for 1 minute to clear all memory.

Note: When memory is full, oldest reading is automatically overwritten.

Care & Maintenance

Proper care ensures accuracy and longevity.

1. Clean monitor with soft, dry cloth only.
2. Clean cuff with mild soap and damp cloth; air dry completely.
3. Do not immerse any part in water.
4. Store in provided case in cool, dry place.
5. Replace batteries when low battery icon appears.
6. Remove batteries if not using for extended period.

CAUTION! Do not use alcohol, benzene, or abrasive cleaners. Do not disassemble unit.

Regulatory Information

FDA Cleared: K012456. CE Marked: MDD 93/42/EEC. Manufactured for Omron Healthcare, Inc. This device complies with Part 15 of FCC Rules. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Service: Do not attempt repair. Contact Omron Healthcare at 1-800-634-4350 or authorized service center.