Omron Gold Wrist Manual

The Omron Gold Wrist is a clinically validated, automatic blood pressure monitor designed for convenient at-home use. It features IntelliSense technology for accurate readings, a large LCD display with backlight, irregular heartbeat detection, hypertension indicator, memory storage for multiple users, and a comfortable cuff that fits wrists 5.3 to 8.5 inches in circumference. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, Wrist Cuff, Storage Case, Instruction Manual, and 2 AAA batteries.

Feature	Description
IntelliSense Technology	Automatically inflates to optimal pressure for accurate readings
Irregular Heartbeat Detection	Detects and displays irregular heartbeat during measurement
Hypertension Indicator	Highlights readings that may indicate hypertension
Dual User Memory	Stores up to 100 readings per user (User A & User B)
Large LCD with Backlight	Easy-to-read display in various lighting conditions
Comfortable Wrist Cuff	Fits wrists 5.3" to 8.5" (13.5cm to 21.5cm)
Date & Time Stamp	Records measurement date and time for tracking
Automatic Power Off	Conserves battery life by turning off after 1 minute of inactivity
Average Reading	Calculates average of last 3 readings taken within 10 minutes
Clinically Validated	Meets accuracy standards of major health organizations

Safety Information

Read all instructions before use. Keep for future reference.

1. Do not use on infants, children, or persons who cannot express themselves.
2. Consult your physician before use if you have arrhythmia, blood circulation problems, or other conditions.
3. Do not use during or immediately after physical exercise or bathing.
4. Do not inflate cuff when not wrapped around wrist.
5. Keep device away from children and pets.

WARNING! This device is not a substitute for professional medical diagnosis. Always consult your physician about your blood pressure readings.

Getting Started

Prepare your monitor for first use.

1. Insert batteries: Open battery compartment, insert 2 AAA batteries observing polarity.
2. Set date and time: Press SET button, use START/STOP to adjust values.
3. Select user: Press USER button to choose User A or User B.
4. Apply cuff correctly: Position cuff 0.5-1 inch above wrist with palm facing up.

CAUTION! Ensure wrist is at heart level during measurement. Sit quietly for 5 minutes before taking reading.

Specifications

• Measurement Method: Oscillometric method
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/minute
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
• Memory Capacity: 100 readings per user (200 total)
• Cuff Size: Fits wrists 5.3" to 8.5" (13.5-21.5cm)
• Power Source: 2 AAA batteries (DC 3.0V)
• Battery Life: Approximately 300 measurements
• Operating Conditions: Temperature: 50°F to 104°F (10°C to 40°C), Humidity: 30% to 85% RH
• Storage Conditions: Temperature: 14°F to 140°F (-10°C to 60°C), Humidity: 10% to 95% RH
• Weight: Approximately 4.2 oz (120g) without batteries

Controls and Display

Front Panel: START/STOP button, USER button, SET button, MEMORY button.

Display Symbols: User indicator (A/B), Battery indicator, Heartbeat symbol, Hypertension indicator, Memory recall, Date/Time, Systolic/Diastolic readings, Pulse rate.

Settings: Date/Time setup, User selection, Memory review, Average calculation display.

Taking a Measurement

For most accurate results, follow these steps:

1. Sit comfortably with feet flat on floor and back supported.
2. Remove tight clothing from wrist area.
3. Apply cuff to left wrist (unless instructed otherwise by physician).
4. Rest elbow on table with cuff at heart level.
5. Press START/STOP button to begin measurement.
6. Remain still and quiet until measurement completes.
7. Readings display: Systolic, Diastolic, and Pulse rate.
8. Device automatically stores reading in selected user memory.

Tip: Take measurements at same time each day for consistent tracking.

Memory Function

Review stored measurements and calculate averages.

1. Press MEMORY button to enter memory mode.
2. Use USER button to select User A or User B memory.
3. Press START/STOP to scroll through stored readings (most recent first).
4. Hold MEMORY button for 3 seconds to display average of last 3 readings.
5. To clear all memory: While in memory mode, hold SET and MEMORY buttons simultaneously for 5 seconds.

Note: Memory is maintained even when batteries are removed.

Understanding Your Readings

Blood Pressure Categories (based on American Heart Association guidelines):

Category	Systolic (mmHg)	Diastolic (mmHg)
Normal	Less than 120	and Less than 80
Elevated	120-129	and Less than 80
Hypertension Stage 1	130-139	or 80-89
Hypertension Stage 2	140 or higher	or 90 or higher
Hypertensive Crisis	Higher than 180	and/or Higher than 120

Irregular Heartbeat Symbol: Appears if irregular heartbeat detected during measurement. Consult physician if this appears frequently.

Care & Maintenance

Proper care ensures accurate measurements and device longevity.

1. Clean cuff with mild soap and damp cloth; do not immerse in water.
2. Wipe main unit with dry, soft cloth.
3. Store in provided case when not in use.
4. Remove batteries if device will not be used for 3 months or more.
5. Avoid extreme temperatures, humidity, dust, and direct sunlight.

CAUTION! Do not use alcohol, benzene, thinner, or abrasive cleaners. Do not disassemble or modify device.

Regulatory Information

FDA Cleared: This device complies with FDA performance standards for electronic blood pressure monitors. FCC Part 15: Class B digital device; complies with interference limits for residential use. CE Marked: Meets European medical device directives. Copyright © Omron Healthcare, Inc. All rights reserved. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace with fresh AAA batteries
Error E1 displayed	Cuff not properly attached	Reattach cuff securely; ensure proper positioning
Error E2 displayed	Measurement error	Remain still and retake measurement
Error E3 displayed	Pulse rate out of range	Check positioning; consult physician if persistent
Inconsistent readings	Movement during measurement	Keep still and quiet; ensure cuff at heart level
Memory not storing	Memory full	Clear memory or switch to other user
Cuff uncomfortable	Applied too tightly	Loosen slightly; should be snug but not painful
Battery drains quickly	Old batteries or frequent use	Use fresh alkaline batteries; turn off after use

Reset: Remove batteries for 1 minute, then reinsert to reset device.

Service: 1-800-634-4350; www.omronhealthcare.com