Omron BP786 Instruction Manual

The Omron BP786 is an upper arm blood pressure monitor with IntelliWrap Cuff, TrueRead technology, and Bluetooth connectivity. It features a large backlit display, irregular heartbeat detection, hypertension detection, body movement detection, and stores up to 200 readings for two users. Below are key sections for safety, features, setup, measurement, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Setup and Installation 4. Specifications 5. Controls and Display 6. Taking a Measurement 7. Using the Omron Connect App 8. Memory and Data Management 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with display, IntelliWrap Cuff, AC adapter, storage case, instruction manual.

Feature	Description
IntelliWrap Cuff	Pre-formed cuff for easy self-wrapping
TrueRead Technology	Provides accurate readings
Bluetooth Connectivity	Syncs data with Omron Connect app
Backlit Display	Easy-to-read screen in low light
Irregular Heartbeat Detection	Detects irregular heart rhythms during measurement
Hypertension Detection	Indicates if reading is in hypertension range
Body Movement Detection	Alerts if movement affects accuracy
Dual User Memory	Stores up to 200 readings for two users
Date and Time Stamp	Records measurement date and time
AC Adapter Port	For power connection

Safety Information

Read all instructions before use.

Do not use on infants, children, or pets.
Consult physician before use if you have arrhythmia, preeclampsia, or other conditions.
Do not use during dialysis or if arm has IV line or shunt.
Do not inflate cuff when not wrapped on arm.
Keep away from children.

WARNING! This device is not a substitute for professional medical diagnosis. Consult your doctor for interpretation of readings.

Setup and Installation

Unpack and inspect contents. Insert batteries or connect AC adapter.

Insert batteries: Open battery compartment, install 4 AA batteries.
Connect AC adapter: Plug into AC adapter port and wall outlet.
Attach cuff: Connect cuff tube to main unit.
Set date and time: Press SET button, use arrows to adjust.

CAUTION! Use only specified AC adapter. Do not mix old and new batteries.

Specifications

Measurement Method: Oscillometric.
Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/min.
Cuff Size: 9-17 inches (22-42 cm) upper arm circumference.
Memory: 200 readings for two users (100 each).
Display: Backlit LCD.
Power Source: 4 AA batteries or AC adapter (included).
Bluetooth: Version 4.0.
Operating Conditions: 50°F to 104°F (10°C to 40°C), 15% to 85% humidity.
Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading.

Controls and Display

Front Panel: START/STOP button, SET button, Memory button, User button.

Display Icons: User indicator, Memory full, Bluetooth, Heartbeat, Movement, Hypertension, Battery low, Date/Time.

Settings: Date/Time, User selection, Memory review, Bluetooth pairing.

Taking a Measurement

For accurate readings, sit quietly for 5 minutes before measuring.

Sit comfortably with feet flat on floor.
Wrap cuff on bare upper arm, 0.5-1 inch above elbow.
Position cuff tube over inner arm.
Rest arm on table with cuff at heart level.
Press START/STOP button.
Remain still and quiet during inflation and measurement.
Reading displays systolic, diastolic, and pulse.
Press START/STOP to turn off.

Tip: Take measurements at same time each day for consistency.

Using the Omron Connect App

Sync data to smartphone for tracking and sharing.

Download Omron Connect app from App Store or Google Play.
Enable Bluetooth on smartphone.
Press SET button on monitor to enter pairing mode.
Follow app instructions to pair device.
After measurement, data syncs automatically to app.

Note: App provides trends, averages, and export options.

Memory and Data Management

Review stored readings on device or app.

Press Memory button to view stored readings.
Use arrows to scroll through readings.
Press User button to switch between User 1 and User 2.
To delete all memory: Hold SET and Memory buttons for 3 seconds.

CAUTION! Deleting memory cannot be undone.

Care & Maintenance

Clean with soft, dry cloth. Do not immerse in water.

Remove batteries if not using for extended period.
Store in provided case in cool, dry place.
Clean cuff with mild soap and damp cloth if soiled.
Do not expose to extreme temperatures or direct sunlight.

WARNING! Do not use alcohol or abrasive cleaners.

Regulatory Information

FDA Cleared: KXXXXXX. FCC Part 15: Class B digital device; complies with interference limits. CE Marked. Manufactured for Omron Healthcare, Inc. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace batteries or connect AC adapter.
Error code E1	Cuff not wrapped correctly	Rewrap cuff and restart measurement.
Error code E2	Body movement during measurement	Remain still and retry.
Bluetooth not connecting	Bluetooth off or out of range	Enable Bluetooth on phone; move within 10 feet.
Inconsistent readings	Incorrect cuff position or talking/moving	Ensure cuff at heart level; sit quietly.
Cuff does not inflate	Cuff tube not connected	Check tube connection to main unit.

Reset: Remove batteries for 1 minute to reset device.

Service: 1-800-634-4350; www.omronhealthcare.com