Omron BP761N User Manual

The Omron BP761N is an upper arm blood pressure monitor with IntelliSense technology for accurate, comfortable readings. It features a wide-range D-Ring cuff (22-42 cm), irregular heartbeat detection, hypertension indicator, body movement detection, 100-memory storage with date and time stamp, averaging of last 3 readings, and a large backlit display. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Taking a Measurement 8. Memory and Data Management 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main Unit, Wide-Range D-Ring Cuff (22-42 cm), AC Adapter, Instruction Manual, Storage Case.

Feature	Description
IntelliSense Technology	Automatic inflation to optimal level for comfortable measurement
Irregular Heartbeat Detection	Detects and displays irregular heartbeat during measurement
Hypertension Indicator	Displays warning symbol if systolic/diastolic readings are high
Body Movement Detection	Alerts if movement is detected during measurement
100-Memory Storage	Stores readings with date and time stamp
Average of Last 3 Readings	Calculates and displays average of last 3 readings taken within 10 minutes
Large Backlit Display	Easy-to-read LCD with backlight for low-light conditions
D-Ring Cuff	Wide-range cuff (22-42 cm) for easy self-application
Date/Time Clock	Built-in clock for accurate time stamping
AC Adapter Port	For power connection (4 AA batteries also supported)

Installation

Unpack and inspect contents. Place on stable surface.

Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
Attach cuff: Connect cuff tube to the air connector on the left side of the unit.
Set date and time: Press SET button, use UP/DOWN to adjust values, press SET to confirm.
Apply cuff: Wrap cuff on bare upper arm 1-2 cm above elbow, align artery marker with brachial artery.

WARNING! Do not use on infants, small children, or persons unable to express themselves. Ensure cuff is not too tight.

First-Time Setup

Power on monitor; follow on-screen prompts.

Set language: Press SET button, select language (ENGLISH default).
Set date and time: Navigate to clock setting, enter current date and time.
User identification: Assign memory slots for multiple users (USER 1, USER 2).
Test measurement: Take a practice reading to ensure proper operation.

CAUTION! Sit quietly for 5 minutes before measurement. Rest arm on table with cuff at heart level.

Specifications

Measurement Method: Oscillometric method.
Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/minute.
Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading.
Memory: 100 readings (50 per user) with date and time.
Cuff Size: 22-42 cm (arm circumference).
Display: LCD with backlight.
Power Source: 4 AA batteries or AC adapter (DC 6V).
Battery Life: Approx. 300 measurements (alkaline batteries).
Operating Conditions: 10°C to 40°C, 15% to 85% RH.
Storage Conditions: -20°C to 60°C, 10% to 95% RH.

Controls and Settings

Access menu via SET button. Front Panel: START/STOP button, SET button, UP/DOWN buttons, MEMORY button.

Display Icons: User indicator, Memory full, Irregular heartbeat, Hypertension, Body movement, Battery low, Heart symbol (pulse).

Settings: Language (ENGLISH, SPANISH, FRENCH), Date/Time format (MM/DD or DD/MM), User selection (USER 1/USER 2), Memory review, Average calculation, Backlight on/off.

Connecting to Power

Batteries: 4 AA batteries. AC Adapter: Use provided adapter.

Turn off monitor before installing batteries or adapter.
Insert batteries observing correct polarity (+/-).
For AC adapter, plug into DC 6V port on monitor, then into wall outlet.
Power on; battery icon shows power status.

Tip: Use alkaline batteries for longer life. Remove batteries if not using for extended period.

Taking a Measurement

For accurate readings, follow proper procedure.

Prepare: Sit quietly for 5 minutes. Avoid caffeine, exercise, smoking 30 minutes before.
Apply cuff: Wrap cuff on bare upper arm, align artery marker.
Position: Rest arm on table, cuff at heart level, feet flat on floor.
Start: Press START/STOP button. Cuff inflates automatically.
Hold still: Remain still and quiet during measurement.
Read results: Systolic, diastolic, and pulse display. Hypertension indicator if high.
Store: Reading automatically stores to current user memory.
Power off: Unit turns off automatically after 1 minute.

WARNING! Do not move or talk during measurement. Ensure cuff is at heart level.

Memory and Data Management

Memory: 100 readings (50 per user). Review: Press MEMORY button to scroll through stored readings. Average: Displays average of last 3 readings taken within 10 minutes. Clear memory: In settings menu, select "Clear All Memory" for current user.

Care & Cleaning

Remove batteries before cleaning. Wipe monitor and cuff with soft, dry cloth. Do not immerse in water or use solvents.

CAUTION! Do not wash cuff. Store in cool, dry place away from direct sunlight.

Regulatory Information

FDA Cleared: KXXXXXX. CE Marked: Complies with MDD 93/42/EEC. Manufacturer: Omron Healthcare, Inc. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace with fresh alkaline batteries.
Error E1, E2, E3	Cuff not attached/leaking	Ensure cuff is connected properly; check for leaks.
Error E4	Signal interference	Remove sources of electromagnetic interference.
Inconsistent readings	Body movement, improper cuff position	Remain still; reposition cuff at heart level.
Memory full	100 readings stored	Delete old readings or clear memory.
Irregular heartbeat symbol	Irregular rhythm detected	Consult physician if symbol appears frequently.

Reset: Remove batteries for 1 minute, then reinsert.

Service: 1-800-634-4350; www.omronhealthcare.com