Omron BP760N User Manual

The Omron BP760N is an automatic upper arm blood pressure monitor with IntelliSense technology, irregular heartbeat detection, hypertension indicator, 60 memory storage, one-touch operation, and body movement detection. Powered by 4 AA batteries or AC adapter. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Device Overview 4. Specifications 5. Initial Setup 6. Taking Measurements 7. Memory Function 8. Understanding Results 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with LCD display, Arm cuff, AC adapter (optional), Batteries, Storage case.

Feature	Description
IntelliSense Technology	Automatically inflates to optimal pressure
Irregular Heartbeat Detection	Detects and displays irregular heartbeat during measurement
Hypertension Indicator	Shows color-coded blood pressure levels
60 Memory Storage	Stores measurements for two users (30 each)
Body Movement Detection	Alerts if movement is detected during measurement
One-Touch Operation	Simple START/STOP button
Cuff Wrap Guide	Ensures proper cuff application
Date & Time Display	Time-stamps all measurements
Automatic Power Off	Conserves battery life
AC Adapter Compatible	Optional AC adapter operation

Package Contents

Unpack and verify all components are present.

Omron BP760N Blood Pressure Monitor
Arm Cuff (22-42 cm circumference)
4 AA Batteries
Instruction Manual
Storage Case
Warranty Card

WARNING! Do not use if any components are damaged or missing. Contact customer service immediately.

Device Overview

Front Panel: LCD Display, START/STOP Button, Memory Button, User Select Button (1/2).

Display Symbols: Systolic Pressure, Diastolic Pressure, Pulse Rate, Irregular Heartbeat Symbol, Hypertension Indicator (color bars), User Indicator, Memory Indicator, Date/Time, Low Battery Symbol, Error Codes.

Cuff Components: Air tube connector, Velcro closure, artery position marker, metal ring.

Specifications

Measurement Method: Oscillometric
Pressure Range: 0-299 mmHg
Pulse Range: 40-180 beats/minute
Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
Cuff Size: 22-42 cm (8.7-16.5 inches)
Memory: 60 measurements (30 per user)
Power Source: 4 AA batteries or AC adapter (optional)
Battery Life: Approximately 300 measurements
Operating Conditions: 50°F to 104°F (10°C to 40°C), 15% to 85% humidity
Dimensions: 5.5" W x 3.2" H x 7.9" D (140mm x 81mm x 201mm)
Weight: 1.1 lbs (500g) without batteries

Initial Setup

Prepare device for first use.

Insert Batteries: Open battery compartment, insert 4 AA batteries observing polarity.
Set Date & Time: Press and hold START/STOP for 3 seconds, use buttons to adjust.
Select User: Press USER button to select User 1 or User 2.
Apply Cuff: Place cuff on bare upper arm 1-2 cm above elbow, align artery marker.
Position Arm: Rest arm on table with cuff at heart level.

CAUTION! Do not use on injured arm or if you have circulatory problems. Consult physician first.

Taking Measurements

For accurate readings, follow these steps.

Rest for 5 minutes before measuring.
Sit comfortably with feet flat on floor.
Apply cuff correctly to left upper arm.
Press START/STOP button - device inflates automatically.
Remain still and quiet during measurement.
Read results on display when measurement completes.
Results are automatically stored in memory.
Remove cuff and power off automatically after 1 minute.

Tip: Take measurements at same time each day for consistent tracking.

Memory Function

Stores 60 measurements (30 per user).

View Memory: Press MEMORY button to scroll through stored readings.
User Selection: Press USER button to switch between User 1 and User 2 memory.
Average Reading: Display shows average of last 3 readings for selected user.
Clear Memory: Press and hold MEMORY button for 3 seconds to clear current user's memory.

Note: Date and time are stored with each measurement.

Understanding Results

Symbol	Meaning	Action
Normal Range	Systolic < 120, Diastolic < 80	Green zone - Continue monitoring
Prehypertension	Systolic 120-139, Diastolic 80-89	Yellow zone - Monitor regularly
Hypertension Stage 1	Systolic 140-159, Diastolic 90-99	Orange zone - Consult physician
Hypertension Stage 2	Systolic ≥ 160, Diastolic ≥ 100	Red zone - Seek medical attention
Irregular Heartbeat Symbol	Detected during measurement	Consult physician if frequent
Body Movement Symbol	Movement detected	Remain still and retake measurement

WARNING! This device is for home monitoring only. Do not use for diagnosis or treatment decisions without consulting a healthcare professional.

Care & Maintenance

Proper care ensures accurate measurements and device longevity.

Clean with soft, dry cloth only.
Do not immerse in water or use liquids.
Store in case when not in use.
Keep away from extreme temperatures and humidity.
Replace batteries when low battery symbol appears.
Inspect cuff regularly for wear or damage.

CAUTION! Do not disassemble or attempt repairs. Contact authorized service center.

Regulatory Information

FDA Cleared: K number [Insert K number here]. CE Marked: Medical Device Directive 93/42/EEC. Manufactured for Omron Healthcare, Inc. Copyright © [Year] Omron Healthcare, Inc. All rights reserved. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace all 4 AA batteries
Error Code E1	Cuff not properly attached	Check cuff connection and retry
Error Code E2	Measurement error	Remain still and retake measurement
Error Code E3	Pulse too irregular	Wait 5 minutes and retry
Inaccurate readings	Improper cuff position	Reposition cuff at heart level
Memory not storing	Memory full	Clear memory for current user
Device won't turn off	Button stuck	Remove batteries and reinsert
Air leakage	Cuff damage	Replace cuff (part #HEM-CUFF-M)

Reset: Remove batteries for 5 minutes, then reinsert.

Service: 1-800-634-4350; www.omronhealthcare.com