Omron BP7455CAN Blood Pressure Monitor Manual

The Omron BP7455CAN is a clinically validated, automatic upper-arm blood pressure monitor with IntelliSense technology for comfortable inflation, irregular heartbeat detection, hypertension indicator, 200 memory storage with date and time, body movement detection, and WHO classification indicator. It features a large backlit display, one-touch operation, and includes a wide-range D-ring cuff (22-42 cm). Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with backlit LCD display, Wide-range D-ring cuff (22-42 cm), AC adapter, Storage case, Instruction manual.

Safety Information

Read all instructions before use. Keep out of reach of children.

1. Do not use on infants, children, or persons who cannot express themselves.
2. Do not use during or immediately after physical exercise or bathing.
3. Do not wrap cuff over clothing; apply directly to bare skin.
4. Consult your physician before use if you have arrhythmia, pre-eclampsia, or other circulatory disorders.
5. Do not disassemble or modify the device.

WARNING! This device is not a substitute for professional medical diagnosis. Always consult your physician about your blood pressure.

Package Contents

Unpack and verify all items are present.

• Omron BP7455CAN Blood Pressure Monitor (main unit)
• Wide-range D-ring cuff (22-42 cm)
• AC adapter
• Storage case
• Instruction manual
• Quick start guide
• 4 x AA batteries (may vary by region)

CAUTION! Do not use if any components are damaged. Contact customer service for replacement.

Specifications

• Measurement Method: Oscillometric method
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/minute
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
• Memory: 200 readings with date and time stamp
• Cuff Size: 22-42 cm (arm circumference)
• Power Source: 4 x AA batteries or AC adapter (included)
• Display: Backlit LCD with large digits
• Automatic Shut-off: Approximately 1 minute after measurement
• Operating Conditions: Temperature: 10°C to 40°C, Humidity: 30% to 85% RH
• Storage Conditions: Temperature: -20°C to 60°C, Humidity: 10% to 95% RH

Device Overview

Front Panel: START/STOP button, Memory button, SET button, Display with backlight.

Display Symbols: Systolic pressure, Diastolic pressure, Pulse rate, Irregular heartbeat symbol, Hypertension indicator, WHO classification bar, Body movement detection, Memory number, Date and time, Battery indicator, AC power indicator.

Cuff: D-ring design with air tube connector, Velcro closure, artery marker for proper positioning.

Initial Setup

Before first use: Install batteries or connect AC adapter, set date and time.

1. Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
2. Set date and time: Press SET button, use START/STOP to adjust values, press SET to confirm.
3. Connect cuff: Insert air plug into socket until it clicks.
4. Apply cuff: Place on left arm (recommended) 1-2 cm above elbow, align artery marker with artery.

Tip: For most accurate results, rest for 5 minutes before measuring and avoid talking or moving during measurement.

Taking a Measurement

Follow these steps for accurate readings.

1. Sit comfortably with feet flat on floor, back supported.
2. Wrap cuff on bare arm at heart level.
3. Press START/STOP button - device will inflate automatically.
4. Remain still and quiet during measurement.
5. Reading displays with systolic, diastolic, and pulse rate.
6. Device automatically deflates and stores reading.
7. Remove cuff after measurement is complete.

WARNING! Do not inflate cuff when not wrapped around arm. Do not use near electromagnetic equipment.

Memory Function

Device stores up to 200 readings with date and time.

1. View memory: Press MEMORY button to scroll through stored readings.
2. Average reading: Display shows average of last 3 readings taken in last 10 minutes.
3. Clear memory: Hold SET button for 3 seconds when in memory mode to clear all readings.
4. Memory full: Oldest reading is automatically deleted when memory is full.

Note: Memory is maintained when batteries are removed (for approximately 3 minutes).

Care & Maintenance

Clean with soft, dry cloth only. Do not immerse in water or use chemicals.

1. Clean cuff with mild soap and damp cloth if soiled; air dry completely.
2. Store in provided case when not in use.
3. Remove batteries if not using for extended period.
4. Avoid extreme temperatures, humidity, dust, and direct sunlight.
5. Replace batteries when low battery indicator appears.

CAUTION! Do not wash cuff in washing machine. Do not expose to strong impacts or vibrations.

Regulatory Information

Health Canada Medical Device License: XXXXXXX. FDA Cleared: KXXXXXX. CE Mark: Complies with MDD 93/42/EEC. This device meets the requirements of ISO 81060-2:2018. Manufactured for Omron Healthcare, Inc. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Reset: Remove batteries and AC adapter, wait 1 minute, reinstall.

Service: 1-800-634-4350; www.omronhealthcare.com