Omron BP7100 User Manual

The Omron BP7100 is an upper arm blood pressure monitor with IntelliSense technology for accurate and comfortable readings. It features a large display, irregular heartbeat detection, hypertension indicator, body movement detection, memory storage for multiple users, and a wide-range D-Ring cuff. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Precautions 3. Parts Identification 4. Initial Setup 5. Taking a Measurement 6. Understanding the Display 7. Memory Function 8. Care & Maintenance 9. Specifications 10. Troubleshooting

Features at a Glance

Key components: Main unit with display, D-Ring Cuff, AC Adapter, Instruction Manual, Storage Case.

Feature	Description
IntelliSense Technology	Automatically inflates to optimal pressure for comfortable measurement
Irregular Heartbeat Detection	Detects and displays irregular heartbeat during measurement
Hypertension Indicator	High blood pressure warning symbol
Body Movement Detection	Alerts if movement is detected during measurement
Memory Storage	Stores up to 100 readings with date and time
D-Ring Cuff	22-42 cm circumference, easy to wrap with one hand
Large Display	Clear, easy-to-read LCD with backlight
WHO Classification Indicator	Shows blood pressure category based on WHO standards
Automatic Power Off	Conserves battery life
Multi-User Mode	Supports two users with separate memory

Safety Precautions

Read all instructions before use. Consult your physician for proper monitoring.

Do not use on infants, children, or persons who cannot express themselves.
Do not use during physical exercise or immediately after exercise.
Do not wrap cuff over clothing; ensure cuff is at heart level.
Do not use if device is damaged or cuff is torn.
Keep device away from electromagnetic fields (microwaves, mobile phones).

WARNING! This device is for home use only, not for clinical diagnosis. Do not adjust medication based solely on readings.

Parts Identification

Front Panel: START/STOP button, MEMORY button, USER button, Display screen. Cuff: D-Ring, air tube, metal hook. Rear: Battery compartment, AC adapter jack.

Display: Shows systolic/diastolic pressure, pulse, date/time, icons.
START/STOP: Begins and stops measurement.
MEMORY: Recalls stored readings.
USER: Selects User 1 or User 2.
Cuff: Wrap around upper arm 1-2 cm above elbow.

CAUTION! Ensure cuff is properly positioned for accurate readings.

Initial Setup

Insert batteries or connect AC adapter.

Insert batteries: Open battery compartment, install 4 AA batteries observing polarity.
Set date and time: Press MEMORY for 3 seconds, use START/STOP to adjust.
Select user: Press USER to choose User 1 or User 2.
Apply cuff: Sit quietly for 5 minutes before first measurement.

Tip: Use fresh alkaline batteries for best performance.

Taking a Measurement

For most accurate results, measure at the same time each day.

Sit comfortably with feet flat on floor, back supported.
Wrap cuff on bare upper arm with tube aligned with artery.
Position cuff at heart level; rest arm on table.
Press START/STOP; device inflates automatically.
Remain still and quiet until measurement completes.
Readings display with pulse; device deflates automatically.
Record reading if desired; device stores automatically.

WARNING! Do not move or talk during measurement.

Understanding the Display

Display shows systolic pressure (top), diastolic pressure (middle), pulse rate (bottom). Icons: User 1/2, memory, irregular heartbeat, body movement, hypertension, battery, clock.

Symbol Guide: Heart with exclamation = irregular heartbeat. Person moving = body motion detected. Triangle with exclamation = hypertension. Battery = low battery. Clock = date/time set.

WHO Indicator: Normal (green), Prehypertension (yellow), Hypertension (red).

Memory Function

Stores 100 readings total (50 per user).

View memory: Press MEMORY to scroll through readings.
Delete memory: Hold MEMORY for 3 seconds in memory mode, confirm with START/STOP.
Average reading: Display shows average of last 3 readings for current user.

Note: Memory is retained when batteries are removed.

Care & Maintenance

Clean with soft, dry cloth. Do not immerse in water.

Store in provided case in cool, dry place.
Remove batteries if not used for 3 months.
Replace cuff if torn or damaged.
Do not expose to extreme temperatures or humidity.

CAUTION! Do not use alcohol or solvents; avoid sharp objects near cuff.

Specifications

Measurement Method: Oscillometric
Pressure Range: 0-299 mmHg
Pulse Range: 40-180 beats/minute
Accuracy: Pressure: ±3 mmHg, Pulse: ±5%
Memory: 100 readings (50 per user)
Cuff Size: 22-42 cm (arm circumference)
Power Source: 4 AA batteries or AC adapter (optional)
Battery Life: Approx. 300 measurements
Dimensions: 123mm (W) × 85mm (H) × 141mm (D)
Weight: Approx. 300g (without batteries)

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace all 4 batteries with fresh ones.
Error E1 displayed	Cuff not properly attached	Reattach cuff, ensure tube is connected securely.
Error E2 displayed	Measurement error	Remain still and retake measurement.
Error E3 displayed	Irregular heartbeat detected	Consult physician if frequent.
Inaccurate reading	Wrong cuff position	Ensure cuff is at heart level on bare arm.
Memory not working	Memory full	Delete old readings or switch to other user.
Device turns off during use	Low battery	Replace batteries or use AC adapter.

Reset: Remove batteries for 1 minute to reset device.

Service: For service, contact Omron Healthcare at 1-800-634-4350 or visit www.omronhealthcare.com