Omron BP7000 User Manual

The Omron BP7000 is an upper arm blood pressure monitor designed for home use, featuring IntelliSense technology for accurate and comfortable readings, irregular heartbeat detection, hypertension indicator, memory storage for multiple users, and a large, easy-to-read display. It operates on AC power or batteries and is clinically validated. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with display, Arm cuff with D-ring, AC adapter, Storage case, Instruction manual.

Feature	Description
IntelliSense Technology	Automatically inflates to optimal pressure for comfortable measurement
Irregular Heartbeat Detection	Detects and displays irregular heartbeat during measurement
Hypertension Indicator	Displays warning symbol if reading exceeds WHO hypertension thresholds
Dual User Memory	Stores up to 100 readings for two users (200 total)
Large LCD Display	Easy-to-read backlit display with date/time
Average Reading	Calculates average of last three readings taken in the last 10 minutes
Body Movement Detection	Alerts if excessive movement affects accuracy
Cuff Wrap Guide	Indicates proper cuff positioning
Automatic Power Off	Conserves battery life
AC/Battery Operation	Works with AC adapter or 4 AA batteries

Safety Precautions

Read all instructions before use. For personal home use only.

1. Do not use on infants, children, or persons unable to express themselves.
2. Do not use during dialysis or if you have pre-eclampsia (consult physician).
3. Do not inflate cuff when not wrapped around arm.
4. Keep away from children and pets.
5. Do not disassemble or modify the unit.

WARNING! This device is not a substitute for professional medical diagnosis. Consult your doctor for interpretation of readings and treatment decisions.

Parts Identification

Front Panel: START/STOP button, MEMORY button, USER button (1/2), Display screen. Cuff: Arm tube, D-ring, air plug, index line. Rear: Battery compartment, AC adapter jack, air connector.

Display Symbols: Systolic/Diastolic pressure, Pulse rate, User indicator (1/2), Memory full, Irregular heartbeat, Hypertension, Body movement, Low battery, Date/Time, Average reading.

Specifications

• Measurement Method: Oscillometric
• Pressure Range: 0-299 mmHg
• Pulse Range: 40-180 beats/minute
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
• Cuff Size: Fits arm circumference 9-17 inches (22-42 cm)
• Memory: 100 readings per user (2 users)
• Power Source: 4 AA batteries or AC adapter (6V DC)
• Battery Life: Approximately 300 measurements (alkaline)
• Operating Conditions: 50°F to 104°F (10°C to 40°C), 15-85% humidity
• Storage Conditions: 14°F to 140°F (-10°C to 60°C), 10-95% humidity

Initial Setup

Before first use: Install batteries or connect AC adapter, set date/time.

1. Insert batteries: Open compartment, insert 4 AA batteries observing polarity.
2. Set date/time: Press and hold MEMORY button for 3 seconds. Use START/STOP to adjust values, MEMORY to confirm.
3. Connect cuff: Plug air tube into unit until it clicks.
4. Select user: Press USER button to choose User 1 or User 2.

CAUTION! Use only specified AC adapter. Do not mix old and new batteries or different types.

Taking a Measurement

For most accurate results: Rest 5 minutes, avoid caffeine/exercise 30 minutes prior, sit comfortably.

1. Wrap cuff: Place cuff on bare upper arm 0.5-1 inch above elbow. Tube should run down center of arm. Secure with D-ring.
2. Position arm: Rest arm on table with cuff at heart level. Sit with feet flat, back supported.
3. Start measurement: Press START/STOP. Cuff inflates automatically.
4. Remain still: Do not talk or move during measurement.
5. Read results: Systolic, diastolic, and pulse display. Hypertension or irregular heartbeat symbols if detected.
6. Memory storage: Reading automatically stores for current user.
7. Power off: Unit turns off automatically after 1 minute.

Tip: Take measurements at same time each day for consistent tracking.

Memory Function

View stored readings: Press MEMORY button. Use START/STOP to scroll through readings for current user. Display shows reading number, date/time, values, and any symbols.

Average function: After taking at least 3 readings within 10 minutes, the average of those readings displays automatically after the third measurement.

Clear memory: To delete all readings for current user, press and hold USER button for 3 seconds while in memory mode.

Understanding Results

Blood Pressure Categories (WHO guidelines):

Category	Systolic (mmHg)	Diastolic (mmHg)
Normal	Less than 120	and Less than 80
Prehypertension	120-139	or 80-89
Hypertension Stage 1	140-159	or 90-99
Hypertension Stage 2	160 or higher	or 100 or higher

Symbols: Hypertension indicator appears if reading ≥135 systolic or ≥85 diastolic. Irregular heartbeat symbol appears if irregular rhythm detected during measurement.

Note: Single readings may vary. Consult your physician about your specific target ranges.

Care & Maintenance

Clean with soft, dry cloth. Do not use alcohol, benzene, or abrasive cleaners.

1. Cuff care: Wipe with damp cloth if soiled. Do not machine wash or iron.
2. Storage: Keep in storage case in cool, dry place away from direct sunlight.
3. Batteries: Replace when low battery symbol appears. Remove if not using for extended period.
4. Unit: Do not subject to strong shocks, humidity, or extreme temperatures.

CAUTION! Do not immerse unit in water. Do not attempt to repair unit yourself.

Regulatory Information

FDA Cleared: KXXXXXX. This device complies with Part 15 of FCC Rules. CE Marked: Meets EU medical device directive requirements. Manufacturer: Omron Healthcare, Inc. For support in US/Canada: 1-800-634-4350. International: www.omronhealthcare.com. Copyright © Omron Healthcare, Inc. All rights reserved.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries, loose adapter	Replace batteries; ensure AC adapter fully inserted.
Error E1, E2, E3	Cuff not wrapped properly	Rewrap cuff, ensure tube connected, restart.
Error E4, E5	Excessive movement during measurement	Keep still, retake measurement.
Inconsistent readings	Improper posture, recent activity	Rest 5 minutes, ensure proper posture, retake.
Cuff doesn't inflate	Air leak, tube not connected	Check cuff/tube connections; ensure no holes in cuff.
Memory full	100 readings stored for current user	Clear memory or switch to other user.
Irregular heartbeat symbol always on	Possible arrhythmia	Consult physician for evaluation.

Reset: Remove batteries and AC adapter for 1 minute, then reinstall.

Service: Do not disassemble. Contact Omron Healthcare for service: 1-800-634-4350.