Omron BP7000 Instruction Manual

The Omron BP7000 is an automatic upper arm blood pressure monitor designed for home use. It features IntelliSense technology for accurate and comfortable readings, a large LCD display with backlight, hypertension indicator, irregular heartbeat detector, memory storage for multiple users, date and time display, and one-touch operation. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Precautions 3. Parts Identification 4. Initial Setup 5. Taking a Measurement 6. Understanding the Display 7. Memory Function 8. Care & Maintenance 9. Specifications 10. Troubleshooting 11. Warranty & Support

Features at a Glance

Key components: Main unit with LCD display, Arm cuff with D-ring, AC adapter, Storage case, Instruction manual.

Feature	Description
IntelliSense Technology	Automatically inflates to optimal pressure for comfortable measurement
Hypertension Indicator	Displays warning symbol if reading is high
Irregular Heartbeat Detector	Detects and displays symbol for irregular pulse during measurement
Dual User Memory	Stores up to 100 readings for two users (User A & User B)
Large LCD with Backlight	Easy-to-read display for day or night use
Date & Time Stamp	Records date and time with each measurement
One-Touch Operation	Simple START/STOP button for easy use
Automatic Power Off	Conserves battery life by turning off after 1 minute of inactivity
AC Adapter Compatible	Can be powered by AC adapter (included) or 4 AA batteries
World Health Organization (WHO) Indicator	Color-coded bar graph shows blood pressure classification

Safety Precautions

Read all instructions before use. For accurate measurements and safe operation.

Do not use on infants, young children, or persons who cannot express themselves.
Do not use during physical exercise or immediately after exercise.
Do not wrap cuff over clothing; apply directly to bare upper arm.
Do not use if you suspect the device is damaged or malfunctioning.
Consult your physician for interpretation of measurements and diagnosis.

WARNING! This device is not intended for treatment or diagnosis of medical conditions. Always follow your healthcare provider's advice.

Parts Identification

Front Panel: LCD Display, START/STOP Button, MEMORY Button, USER Button, Clock Set Button.

Display Symbols: Systolic Pressure, Diastolic Pressure, Pulse Rate, User Indicator (A/B), Memory Full, Irregular Heartbeat, Hypertension, Low Battery, Date/Time.

Cuff: Arm tube, D-ring, Air plug, Index line (for proper fit).

Initial Setup

Before first use: Install batteries or connect AC adapter, set date and time.

Battery installation: Open battery compartment, insert 4 AA batteries observing polarity.
AC adapter: Plug adapter into DC jack on side of unit, then into wall outlet.
Set date/time: Press and hold CLOCK button, use START/STOP to adjust values.
Cuff preparation: Ensure cuff is not twisted and air tube is connected securely.

CAUTION! Use only specified AC adapter. Do not mix old and new batteries.

Taking a Measurement

For most accurate results, measure at the same time each day, before meals or medication.

Sit comfortably with feet flat on floor, back supported, arm resting on table.
Wrap cuff on bare upper arm, 1-2 cm above elbow. Align artery marker with brachial artery.
Secure cuff snugly using D-ring. Tube should run down center of arm.
Press START/STOP button. Unit will inflate automatically.
Remain still and quiet during measurement. Do not move arm or talk.
Reading displays when complete. Unit deflates automatically.
To turn off, press START/STOP again or wait for auto power-off.

Tip: Wait at least 5 minutes between measurements on the same person.

Understanding the Display

LCD shows systolic/diastolic pressure (mmHg), pulse rate (bpm), and status symbols.

Symbol Guide: User A/B icon, Memory position number, Date/Time, Hypertension symbol (if systolic ≥135 or diastolic ≥85), Irregular heartbeat symbol (if detected), WHO indicator bar (Green=Normal, Yellow=Pre-hypertension, Red=Hypertension).

Error Codes: E1 - Cuff not properly attached, E2 - Measurement error, E3 - Irregular pulse detected, E4 - Cuff pressure too high.

Memory Function

Stores 100 readings per user with date/time stamp.

Select user: Press USER button to toggle between User A and User B.
View memory: Press MEMORY button to scroll through stored readings.
Clear memory: While in memory mode, press and hold MEMORY for 3 seconds.
Average reading: Displays average of last 3 readings taken in the past 10 minutes.

Note: Memory is retained when batteries are removed or replaced.

Care & Maintenance

Unplug or remove batteries before cleaning. Use soft, dry cloth only.

Clean cuff with mild soap and damp cloth if soiled. Air dry completely.
Do not immerse unit in water or use abrasive cleaners.
Store in carrying case when not in use, in cool dry place.
Replace batteries when low battery symbol appears.
Avoid extreme temperatures, humidity, dust, and direct sunlight.

CAUTION! Do not disassemble or attempt repairs. No user-serviceable parts inside.

Specifications

Measurement Method: Oscillometric
Pressure Range: 0-299 mmHg
Pulse Range: 40-180 beats per minute
Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
Cuff Size: 22-42 cm (9-17 inches) circumference
Memory: 100 readings x 2 users
Power Source: 4 AA batteries or AC adapter (6V DC, 1A)
Battery Life: Approximately 300 measurements (alkaline batteries)
Dimensions: 123mm (W) x 85mm (H) x 141mm (D)
Weight: Approximately 340g (without batteries)

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace all 4 batteries with fresh ones
Error E1 appears	Cuff not connected	Ensure air plug is securely connected
Inaccurate reading	Improper cuff position	Reposition cuff at heart level; sit still during measurement
Unit won't inflate	Air leak in cuff/tube	Check for cracks or holes; ensure connections are tight
Memory not working	Memory full	Clear memory or switch to other user
Irregular heartbeat symbol	Pulse irregularity detected	Take another measurement; consult physician if frequent

Reset: Remove batteries for 1 minute to reset microprocessor.

Warranty & Support

Omron Healthcare, Inc. provides a 5-year limited warranty from date of purchase. Warranty covers defects in materials and workmanship under normal use. Keep original receipt as proof of purchase.

For Support: Omron Healthcare, Inc. Customer Support: 1-800-634-4350, Website: www.omronhealthcare.com. Service hours: Monday-Friday, 8:00 AM - 5:00 PM CST.

Disposal: Dispose of device and batteries according to local regulations. Do not dispose with household waste.