Omron BP652 User Manual

The Omron BP652 is an automatic blood pressure monitor with IntelliSense technology for accurate and comfortable readings. It features a large, easy-to-read display, memory storage for multiple users, hypertension detection, irregular heartbeat detection, and a body movement indicator. Powered by 4 AA batteries or AC adapter. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main Unit, Arm Cuff, AC Adapter, Instruction Manual, Storage Case.

Feature	Description
IntelliSense Technology	Automatically inflates to optimal pressure for comfortable measurement
Large LCD Display	Easy-to-read results for systolic, diastolic, and pulse
Memory Storage	Stores up to 100 readings for two users (User 1 & User 2)
Hypertension Indicator	Displays warning symbol if reading exceeds WHO guidelines
Irregular Heartbeat Detector	Detects and displays symbol for irregular heartbeats during measurement
Body Movement Indicator	Alerts if movement is detected that may affect accuracy
Date & Time Stamp	Records date and time with each reading
Automatic Power Off	Conserves battery life by turning off after 2 minutes of inactivity
AC Adapter Port	For use with included AC adapter
START/STOP Button	Initiates and stops measurement

Installation & Setup

Unpack and inspect contents. Place on stable, flat surface.

1. Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
2. Connect AC adapter (optional): Plug adapter into DC jack on side of unit.
3. Attach cuff: Connect cuff tube to the air connector on left side of unit.
4. Set date and time: Press SET button, use UP/DOWN to adjust, press SET to confirm.

WARNING! Use only specified AC adapter. Do not mix old and new batteries.

First-Time Use

Power on monitor; follow setup prompts.

1. Select user: Press USER button to choose User 1 or User 2.
2. Apply cuff correctly: Wrap cuff on bare upper arm 1-2 cm above elbow.
3. Position arm: Rest arm on table with cuff at heart level.
4. Take measurement: Press START/STOP button, remain still and quiet.
5. View results: Systolic, diastolic, and pulse readings display automatically.

CAUTION! Ensure cuff is not too tight or too loose for accurate readings.

Specifications

• Measurement Method: Oscillometric (automatic inflation/deflation).
• Measurement Range: Pressure: 0-299 mmHg; Pulse: 40-180 beats/min.
• Accuracy: Pressure: ±3 mmHg; Pulse: ±5% of reading.
• Memory: 100 readings for 2 users (200 total).
• Cuff Size: Fits arm circumference 22-32 cm (9-13 inches).
• Power Source: 4 AA batteries or AC adapter (6V DC, 600mA).
• Display: LCD with backlight.
• Operating Conditions: Temperature: 10°C to 40°C; Humidity: 30% to 85% RH.
• Dimensions: 123mm (W) x 85mm (H) x 141mm (D).
• Weight: Approx. 340g (without batteries).

Controls and Display

Front Panel: START/STOP button, USER button, SET button, UP/DOWN buttons.

Display Icons: User 1/2, Memory, Hypertension, Irregular Heartbeat, Body Movement, Battery, Date/Time.

Settings Menu: Press SET to access date/time setting, memory review, and unit reset. Memory Review: Press USER to select user, then press SET to scroll through stored readings. Backlight: Automatically illuminates during measurement and when buttons are pressed.

Taking a Measurement

For most accurate results, measure at same time each day.

1. Sit comfortably with feet flat on floor, back supported.
2. Apply cuff to left arm (unless specified otherwise by physician).
3. Position cuff at heart level, tube facing downward.
4. Press START/STOP button; unit will inflate automatically.
5. Remain still and quiet until measurement completes and cuff deflates.
6. Read results on display; note any indicator icons.
7. Unit automatically stores reading if memory is on.

Tip: Avoid eating, smoking, or exercising for 30 minutes before measurement.

Memory Function

Stores up to 100 readings per user with date and time stamp.

1. Enable/disable memory: In settings menu, select MEMORY ON/OFF.
2. Review memory: Press USER to select user, press SET to scroll through readings.
3. Delete memory: In settings menu, select DELETE ALL for current user.
4. Average reading: Displays average of last 3 readings taken within last 10 minutes.

Note: Memory is retained when batteries are removed if changed within 3 minutes.

Health Indicators

Hypertension Indicator: Displays if systolic ≥135 mmHg or diastolic ≥85 mmHg. Irregular Heartbeat Detector: Displays symbol if irregular rhythm detected during measurement. Body Movement Indicator: Appears if excessive movement is detected; consider retaking measurement.

Important: These indicators are for reference only. Consult healthcare professional for diagnosis.

Care & Maintenance

Remove batteries before cleaning. Wipe with soft, dry cloth; do not use solvents.

1. Cuff care: Wipe with damp cloth and mild detergent; air dry completely.
2. Storage: Store in provided case in cool, dry place away from direct sunlight.
3. Battery replacement: Replace when low battery icon appears.
4. Unit cleaning: Use dry cloth only; never immerse in water.

CAUTION! Do not disassemble unit. Avoid extreme temperatures and humidity.

Regulatory Information

FDA Cleared: KXXXXXX. CE Marked: Medical Device Directive 93/42/EEC. Manufacturer: Omron Healthcare, Inc. For support, visit www.omronhealthcare.com or contact 1-800-634-4350. This device is intended for home use only. Copyright © 2023 Omron Healthcare, Inc. All rights reserved.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace all 4 AA batteries; ensure proper polarity.
Error E1 displayed	Cuff not connected	Ensure cuff tube is securely connected to unit.
Error E2 displayed	Cuff over-inflated	Remove cuff; restart measurement with proper application.
Inconsistent readings	Body movement	Remain still and quiet during measurement; retake.
Memory not storing	Memory full/disabled	Delete old readings or enable memory in settings.
Cuff does not inflate	Tube blockage/leak	Check tube for kinks; ensure tight connection.
Irregular heartbeat symbol always on	Medical condition	Consult physician if symbol appears repeatedly.

Reset: Remove batteries and AC adapter for 3 minutes to reset unit.

Service: 1-800-634-4350; www.omronhealthcare.com