Omron BP652 Instruction Manual

The Omron BP652 is an automatic upper arm blood pressure monitor with IntelliSense technology for comfortable, accurate readings. It features a wide-range D-Ring cuff (22-42 cm), hypertension indicator, irregular heartbeat detection, body movement detection, 100-memory storage with date and time, and an easy-to-read backlit display. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Precautions 3. Parts Identification 4. Setting Up the Monitor 5. Taking a Measurement 6. Understanding Your Readings 7. Using the Memory Function 8. Care & Maintenance 9. Battery Information 10. Troubleshooting 11. Specifications & Warranty

Features at a Glance

Key components: Main unit with backlit display, Wide-Range D-Ring Cuff (22-42 cm), Instruction Manual, 4 AA batteries, Storage case.

Feature	Description
IntelliSense Technology	Automatically inflates to the optimal level for comfortable measurement
Hypertension Indicator	Displays warning symbol if systolic/diastolic readings are high
Irregular Heartbeat Detection	Detects and displays symbol for irregular heartbeats during measurement
Body Movement Detection	Alerts if excessive movement is detected during measurement
100-Memory Storage	Stores up to 100 readings with date and time stamp
Backlit Display	Easy-to-read LCD screen with gentle backlight
D-Ring Cuff	Pre-formed cuff for easy self-application (22-42 cm circumference)
Average Reading	Calculates average of last 3 readings taken within last 10 minutes
Date/Time Clock	Built-in clock for accurate time-stamping of readings
Automatic Power Off	Conserves battery life by turning off after 1 minute of inactivity

Safety Precautions

Read all instructions before use. For personal home use only.

Do not use on infants, children, or persons who cannot express themselves.
Do not use during or immediately after physical exercise or bathing.
Do not use on an arm with an intravenous drip or surgical wound.
Consult your physician before use if you have arrhythmia, blood disease, or are pregnant.
Do not modify or disassemble the device.

WARNING! This device is not a substitute for professional medical diagnosis. Consult your physician for interpretation of readings.

Parts Identification

Front Panel: START/STOP button, MEMORY button, SET button, Display screen. Cuff: D-Ring, Air plug, Index line. Rear: Battery compartment, AC adapter port (optional).

Display Symbols: Systolic/Diastolic pressure, Pulse rate, Hypertension indicator, Irregular heartbeat symbol, Body movement symbol, Memory number, Date/Time, Battery level, Average reading icon.

Setting Up the Monitor

Initial setup for first-time use.

Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
Set date and time: Press SET button, use START/STOP to adjust values, press SET to confirm.
Apply cuff correctly: Left arm recommended. Ensure index line is within range marks.
Positioning: Sit comfortably with back straight, feet flat, arm supported at heart level.

CAUTION! Do not use if cuff is damaged. Ensure cuff is correct size for your arm.

Taking a Measurement

For most accurate results, measure at the same time each day.

Rest for 5 minutes before measuring. Avoid caffeine, tobacco, and exercise 30 minutes prior.
Apply cuff: Insert arm through D-Ring, align artery marker with brachial artery, secure with cloth fastener.
Position: Sit quietly with cuff at heart level. Press START/STOP button.
Measurement: Cuff inflates automatically. Remain still and quiet until measurement completes.
Reading: Systolic, diastolic, and pulse readings display. Hypertension indicator lights if high.
Memory: Reading is automatically stored with time/date stamp.
Power off: Device turns off automatically after 1 minute.

Tip: Take 2-3 readings, 1-2 minutes apart, and record the average.

Understanding Your Readings

Normal: Systolic < 120 mmHg and Diastolic < 80 mmHg.
Elevated: Systolic 120-129 mmHg and Diastolic < 80 mmHg.
Hypertension Stage 1: Systolic 130-139 mmHg or Diastolic 80-89 mmHg.
Hypertension Stage 2: Systolic ≥ 140 mmHg or Diastolic ≥ 90 mmHg.
Hypertensive Crisis: Systolic > 180 mmHg and/or Diastolic > 120 mmHg.

Symbols: Hypertension indicator ( ), Irregular heartbeat ( ), Body movement ( ).

Using the Memory Function

Stores up to 100 readings with date and time.

View Memory: Press MEMORY button to scroll through stored readings. Display shows memory number, systolic/diastolic, pulse, date, and time.

Average Reading: Automatically calculates average of last 3 readings taken within 10 minutes. Displayed when taking a new reading.

Clear Memory: Press and hold MEMORY button for 3 seconds while in memory mode to delete all stored readings.

Care & Maintenance

Unplug AC adapter (if used) and remove batteries before cleaning.

Clean monitor with soft, dry cloth. Do not use alcohol, thinner, or abrasive cleaners.
Clean cuff with mild soap and damp cloth. Do not immerse in water or machine wash.
Store in provided case in cool, dry place away from direct sunlight and extreme temperatures.
Inspect cuff regularly for cracks, tears, or loose stitching.

CAUTION! Do not expose to high humidity, dust, or strong vibrations. Keep away from children.

Battery Information

Uses 4 AA alkaline batteries (included).

Battery Life: Approximately 300 measurements.
Low Battery Indicator: Symbol appears on display when batteries need replacement.
Replacement: Replace all 4 batteries at same time with new alkaline batteries.
AC Adapter: Optional Omron EA-AC01 adapter (sold separately).

WARNING! Do not mix old and new batteries. Remove batteries if not using for extended period.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace all 4 batteries with new alkaline batteries.
Error E1, E2, E3	Cuff not applied correctly	Reapply cuff, ensure index line is within range marks.
Error E5	Excessive movement during measurement	Remain still and quiet, retake measurement.
Inconsistent readings	Incorrect positioning	Ensure arm is at heart level, back supported, feet flat.
Memory full	100 readings stored	Clear memory or record readings manually before clearing.
Cuff does not inflate	Air tube not connected	Ensure air plug is securely connected to monitor.

Reset: Remove batteries for 5 minutes, then reinsert.

Service: Do not attempt to repair. Contact Omron customer service.

Specifications & Warranty

Measurement Method: Oscillometric
Pressure Range: 0-299 mmHg
Pulse Range: 40-180 beats per minute
Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
Cuff Size: 22-42 cm (8.7-16.5 inches)
Power Source: 4 AA batteries or AC adapter (optional)
Operating Conditions: 50°F to 104°F (10°C to 40°C), 30-85% humidity
Storage Conditions: -4°F to 140°F (-20°C to 60°C), 10-95% humidity
Warranty: 5-year limited warranty from date of purchase

For support, visit www.omronhealthcare.com or contact 1-800-634-4350.