Omron BP5250 Instruction Manual

The Omron BP5250 is an automatic upper arm blood pressure monitor with IntelliSense technology for accurate and comfortable readings. It features a large, easy-to-read display, memory storage for multiple users, hypertension detection indicator, irregular heartbeat detection, and body movement detection. Powered by 4 AA batteries or AC adapter (sold separately). Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Getting Started 4. Specifications 5. Parts Identification 6. Applying the Cuff 7. Taking a Measurement 8. Memory Function 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with display, Arm Cuff, AC adapter port (optional), Battery compartment, Memory button, START/STOP button.

Feature	Description
IntelliSense Technology	Automatically inflates to optimal pressure for comfortable measurement
Hypertension Indicator	Displays symbol if systolic/diastolic readings are high
Irregular Heartbeat Detection	Detects and displays symbol for irregular heartbeats during measurement
Body Movement Detection	Alerts if excessive movement is detected during measurement
Memory Storage	Stores up to 100 readings with date and time for two users
Large LCD Display	Easy-to-read backlit display with clear icons
Cuff Wrapping Guide	Ensures proper cuff application for accurate readings
Automatic Power Off	Conserves battery life by turning off after 1 minute of inactivity
AC Adapter Compatible	Can be used with optional AC adapter (model HEM-AC20)
Validated Accuracy	Clinically validated for accuracy and reliability

Safety Information

Read all instructions before use. Keep for future reference.

Do not use on infants, children, or persons unable to express themselves.
Do not use during periods of arrhythmia (irregular heartbeat).
Consult physician before use if you have circulatory problems or severe diabetes.
Do not inflate cuff when not wrapped around arm.
Keep away from children and pets.

WARNING! This device is not a substitute for professional medical diagnosis. Consult your physician for interpretation of readings.

Getting Started

Prepare the device for first use.

Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
Set date and time: Press and hold MEMORY button for 3 seconds, use START/STOP to adjust.
Attach cuff: Connect cuff tube to the air connector on left side of unit.
Test operation: Apply cuff properly and take a practice measurement.

CAUTION! Use only recommended batteries. Do not mix old and new batteries.

Specifications

Measurement Method: Oscillometric method
Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/minute
Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
Cuff Size: Fits arm circumference 9-17 inches (22-42 cm)
Memory: 100 readings for 2 users (200 total)
Power Source: 4 AA batteries or AC adapter (6V DC, 600mA)
Battery Life: Approximately 300 measurements
Display: LCD with backlight
Dimensions: Main unit: 5.1" W x 3.0" H x 1.8" D (130 x 76 x 46 mm)
Weight: Approximately 12.3 oz (350 g) without batteries
Operating Conditions: Temperature: 50°F to 104°F (10°C to 40°C), Humidity: 30% to 85% RH

Parts Identification

Front Panel: LCD display, START/STOP button, MEMORY button. Side: Air connector, AC adapter jack. Rear: Battery compartment.

Display Symbols: User indicator (1/2), Memory full, Battery low, Hypertension indicator, Irregular heartbeat, Body movement, Date/Time, Systolic/Diastolic pressure, Pulse rate.

Buttons: START/STOP - begins/stops measurement, MEMORY - recalls stored readings and sets clock.

Applying the Cuff

Proper cuff application is essential for accurate readings.

Sit quietly for 5 minutes before measurement.
Remove tight clothing from upper arm.
Place cuff on bare arm with artery marker over brachial artery.
Wrap cuff snugly with bottom edge 0.5-1 inch above elbow.
Rest arm on table with cuff at heart level.

Tip: Do not talk or move during measurement. Keep feet flat on floor.

Taking a Measurement

Follow these steps for accurate blood pressure measurement.

Select user: Press MEMORY to select User 1 or User 2 (indicator shows on display).
Apply cuff: Follow proper cuff application procedure.
Start measurement: Press START/STOP button.
Remain still: Cuff inflates automatically. Do not move or talk.
Read results: Systolic, diastolic, and pulse appear on display.
Store reading: Reading automatically stores to selected user's memory.
Remove cuff: After measurement completes and cuff deflates.

WARNING! Do not inflate cuff more than once within 2 minutes to allow circulation to return.

Memory Function

View and manage stored readings.

Recall readings: Press MEMORY button to view stored readings for selected user.
Scroll through readings: Press START/STOP to scroll through stored readings.
Clear memory: Press and hold MEMORY for 5 seconds while in memory mode to clear all readings for selected user.
Average reading: First displayed reading shows average of last 3 readings.

Note: Memory full indicator appears when 100 readings are stored for a user.

Care & Maintenance

Clean and store properly to ensure longevity.

Clean cuff: Use mild soap and damp cloth. Do not immerse in water.
Clean unit: Wipe with soft, dry cloth. Do not use solvents or abrasives.
Store properly: Keep in cool, dry place away from direct sunlight.
Remove batteries: If not using for extended period (3 months or more).
Replace cuff: If cracks, tears, or leaks develop.

CAUTION! Do not disassemble or attempt repairs. Contact authorized service center.

Regulatory Information

FDA Cleared: K012456. Manufactured for Omron Healthcare, Inc. CE Mark: Complies with European Medical Device Directive 93/42/EEC. This device complies with Part 15 of FCC Rules. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace all 4 AA batteries with new ones.
Error E1 appears	Cuff not attached properly	Check cuff connection; reattach securely.
Error E2 appears	Cuff pressure error	Ensure cuff is not twisted; replace if damaged.
Error E3 appears	Measurement error	Remain still during measurement; retake reading.
Inconsistent readings	Improper cuff position	Reapply cuff at heart level; ensure proper tightness.
Memory not storing	Memory full	Clear memory for selected user.
Irregular heartbeat symbol	Arrhythmia detected	Consult physician if symbol appears frequently.
Hypertension symbol	High reading detected	Rest 5 minutes and retake; consult physician if persistent.

Reset: Remove batteries for 1 minute to reset device.

Service: 1-800-634-4350; www.omronhealthcare.com