Omron BP Wrist Cuff Manual

The Omron BP Wrist Cuff is a digital blood pressure monitor designed for convenient at-home use. It features IntelliSense technology for accurate readings, a large LCD display with backlight, irregular heartbeat detection, hypertension indicator, memory storage for multiple users, body movement detection, and a comfortable pre-formed wrist cuff. Powered by batteries (included) with an AC adapter option. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Precautions 3. Parts Identification 4. Specifications 5. Initial Setup 6. Taking a Measurement 7. Understanding Results 8. Memory Function 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Wrist Cuff with IntelliSense, Main Unit with LCD Display, Storage Case, Batteries (2x AA), AC Adapter (optional), Instruction Manual.

Feature	Description
IntelliSense Technology	Automatically inflates to optimal pressure for accurate reading
Large LCD Display	Shows systolic/diastolic pressure, pulse, and indicators
Backlight	For easy reading in low-light conditions
Irregular Heartbeat Detector	Detects and displays irregular heartbeat during measurement
Hypertension Indicator	High blood pressure warning symbol
Memory Storage	Stores readings for up to two users (e.g., 60 readings each)
Body Movement Detection	Alerts if movement is detected during measurement
Pre-formed Wrist Cuff	Designed for comfortable and proper fit
START/STOP Button	Initiates and stops measurement
MEMORY Button	Recalls stored readings

Safety Precautions

Read all instructions before use. For personal use only.

Do not use on infants, children, or persons unable to express themselves.
Consult your physician before use if you have arrhythmia, blood circulation problems, or other conditions.
Do not use while operating a vehicle or machinery.
Keep away from children and pets.

WARNING! This device is not a substitute for professional medical diagnosis. Seek medical advice for health concerns.

Parts Identification

Front: LCD Display, START/STOP Button, MEMORY Button. Side: Battery Compartment, AC Adapter Port. Cuff: Air Tube Connector, Wrist Strap with Hook-and-Loop Closure.

Specifications

Measurement Method: Oscillometric (wrist).
Measurement Range: Pressure: 0-299 mmHg; Pulse: 40-180 beats/min.
Accuracy: Pressure: ±3 mmHg; Pulse: ±5% of reading.
Memory: Stores up to 60 readings per user (2 users).
Cuff Size: Fits wrist circumference 5.3"-8.5" (13.5-21.5 cm).
Power Source: 2 AA batteries (included) or optional AC adapter.
Battery Life: Approx. 300 measurements.
Operating Conditions: 50°F to 104°F (10°C to 40°C); 30-85% humidity.
Weight: Approx. 8.8 oz (250 g) including batteries.

Initial Setup

Prepare device before first use.

Insert batteries: Open battery compartment, insert 2 AA batteries observing polarity.
Set date and time: Press and hold MEMORY button for 3 seconds, use START/STOP to adjust.
Attach cuff: Connect air tube to main unit until it clicks.
Test: Perform a measurement without wearing to ensure inflation/deflation.

CAUTION! Use only specified batteries or AC adapter. Do not mix old and new batteries.

Taking a Measurement

For accurate results, follow these steps carefully.

Rest for 5 minutes before measuring. Sit in a chair with feet flat on floor.
Position cuff: Place on bare left wrist (palm facing up) about 0.5-1 inch from hand.
Secure cuff: Wrap snugly; ensure it's not too tight or loose.
Position arm: Rest elbow on table, raise wrist to heart level (chest height).
Start: Press START/STOP. Remain still and quiet during inflation/deflation.
Read results: Systolic/diastolic pressure and pulse display automatically.
Power off: Unit turns off automatically after 1 minute.

Tip: Avoid talking, moving, or crossing legs during measurement.

Understanding Results

LCD displays: Systolic (upper number), Diastolic (lower number), Pulse rate. Indicators: Irregular Heartbeat Symbol (if detected), Hypertension Indicator (if systolic ≥135 or diastolic ≥85), User Icon (1 or 2), Date/Time of reading.

Refer to blood pressure classification chart (normal, prehypertension, hypertension stages). Consult your physician to interpret readings and establish a monitoring plan.

Memory Function

Store and recall readings for two users.

Select user: Press MEMORY briefly to toggle between User 1 and User 2 icons.
Store reading: After measurement, reading is automatically saved to selected user.
Recall readings: Press and hold MEMORY for 2 seconds to view stored readings; use START/STOP to scroll.
Clear memory: While in memory recall, press and hold both buttons for 5 seconds to clear current user's memory.

Care & Maintenance

Unplug AC adapter and remove batteries before cleaning. Wipe with soft, dry cloth. Do not immerse in water or use abrasive cleaners.

Storage: Keep in storage case in a cool, dry place away from direct sunlight, extreme temperatures, and humidity.

CAUTION! Do not disassemble or attempt repairs. Have device serviced only by qualified personnel.

Regulatory Information

FDA Cleared: For over-the-counter home use. FCC Part 15: Class B digital device; complies with interference limits. Manufacturer: Omron Healthcare, Inc. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace with new AA batteries.
Error Code E1	Cuff not attached/leaking	Ensure cuff is connected properly; check for damage.
Error Code E2	Irregular pulse detected	Rest and measure again. If persistent, consult physician.
Error Code E3	Movement during measurement	Keep still and retry.
Inaccurate reading	Incorrect positioning	Ensure wrist is at heart level; cuff is snug.
Memory not saving	Memory full	Clear memory for current user.
Unit does not inflate	Blocked air tube	Check for kinks; ensure connection is secure.

Reset: Remove batteries for 5 minutes, then reinsert.

Service: 1-800-634-4350; www.omronhealthcare.com