Omron BP Monitor User Manual

The Omron BP Monitor is a digital blood pressure monitoring device designed for home use, featuring automatic inflation, irregular heartbeat detection, hypertension indicator, memory storage for multiple users, date/time stamp, WHO classification indicator, adjustable cuff, large LCD display, and battery/USB power options. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Contents 3. Device Setup 4. Specifications 5. Controls and Display 6. Taking Measurements 7. Memory Function 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main unit with LCD display, Arm cuff with tubing, AC adapter, Storage case, Instruction manual.

Feature	Description
Automatic Inflation	One-touch operation for easy measurement
Irregular Heartbeat Detection	Detects and displays irregular heartbeat during measurement
Hypertension Indicator	Alerts when readings exceed WHO guidelines
Dual User Memory	Stores up to 100 readings per user
Date/Time Stamp	Records measurement date and time
WHO Classification	Color-coded display shows blood pressure category
Adjustable Cuff	Fits arm circumferences 22-42cm
Large LCD Display	Easy-to-read backlit screen
Power Options	4 AA batteries or AC adapter
Average Reading	Calculates average of last 3 readings

Unpacking and Contents

Carefully unpack and verify all components are present.

Main monitor unit with display
Arm cuff with air tube
AC adapter (model-specific)
4 AA batteries
Instruction manual
Storage case
Quick start guide

WARNING! Do not use if any components are damaged. Keep packaging for future reference.

Device Setup

Prepare device for first use following these steps.

Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
Connect cuff: Attach air tube to monitor connection port until it clicks.
Set date/time: Press SET button, use arrow keys to adjust date and time.
User selection: Press USER button to select User 1 or User 2.
Cuff placement: Position cuff on bare upper arm 1-2cm above elbow.

CAUTION! Ensure cuff is properly positioned for accurate readings.

Specifications

Measurement Method: Oscillometric
Pressure Range: 0-299 mmHg
Pulse Range: 40-180 beats/minute
Accuracy: Pressure: ±3 mmHg, Pulse: ±5%
Memory Capacity: 100 readings per user (2 users)
Cuff Size: 22-42cm arm circumference
Power Supply: 4 AA batteries or 6V DC adapter
Battery Life: Approximately 300 measurements
Display: LCD with backlight
Operating Conditions: 10°C to 40°C, 30-85% humidity

Controls and Display

Front panel controls: START/STOP, SET, USER, MEMORY, POWER.

Display Symbols: Systolic pressure, Diastolic pressure, Pulse rate, User indicator, Battery level, Irregular heartbeat symbol, Hypertension indicator, Date/Time, Memory index.

Settings Menu: Accessed via SET button for date/time, user selection, unit selection (mmHg/kPa). Memory Function: Press MEMORY to review stored readings with date/time stamp. Power Management: Auto power-off after 1 minute of inactivity.

Taking Measurements

For accurate readings, follow proper measurement procedure.

Sit comfortably with back supported and feet flat on floor.
Rest for 5 minutes before measurement.
Apply cuff to bare left arm at heart level.
Press START/STOP button to begin inflation.
Remain still and quiet during measurement.
Read results on display when measurement completes.
Record reading if desired, or it automatically stores to memory.
Wait 2-3 minutes between measurements.

Tip: Take measurements at same time each day for consistent tracking.

Memory Function

Store and review blood pressure history.

Automatic storage: Each measurement saves to current user's memory.
Review readings: Press MEMORY button to scroll through stored readings.
Average calculation: Displays average of last 3 readings for current user.
User switching: Press USER to toggle between User 1 and User 2 memory.
Memory full: Oldest reading overwritten when memory reaches capacity.

Note: Memory preserved when batteries are replaced (briefly).

Care & Maintenance

Proper care ensures device longevity and accuracy.

Clean cuff with mild soap and damp cloth; air dry completely.
Wipe monitor with soft, dry cloth; never use solvents.
Store in provided case in cool, dry place.
Replace batteries when low battery indicator appears.
Avoid extreme temperatures, humidity, and direct sunlight.
Have device accuracy checked annually by authorized service center.

CAUTION! Do not immerse any part in water. Do not disassemble.

Regulatory Information

FDA Cleared: For over-the-counter home use. CE Marked: Meets European medical device directives. Manufactured under ISO 13485 quality standards. Copyright © Omron Healthcare, Inc. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace all 4 AA batteries; ensure proper polarity.
Error code E1	Cuff not attached	Connect cuff properly to monitor port.
Error code E2	Cuff over-inflated	Deflate completely and restart measurement.
Inaccurate reading	Improper cuff position	Reposition cuff at heart level on bare arm.
Memory not saving	Memory full	Review and clear old readings if needed.
Irregular heartbeat symbol	Arrhythmia detected	Consult physician if symbol appears frequently.

Reset: Remove batteries for 5 minutes to reset device.

Service: 1-800-634-4350; www.omronhealthcare.com