omron bp manual be device instructions

The Omron BP Manual BE Device is a blood pressure monitor designed for accurate at-home measurement. It features automatic inflation, irregular heartbeat detection, hypertension indicator, memory storage for multiple users, body movement detection, and a large LCD display with backlight. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Precautions 3. Device Components 4. Specifications 5. Initial Setup 6. Taking a Measurement 7. Understanding Results 8. Memory Function 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit, Arm cuff, AC adapter, Instruction manual, Storage case.

Feature	Description
Automatic Inflation	One-touch operation for easy measurement
Irregular Heartbeat Detection	Detects and displays irregular heartbeat during measurement
Hypertension Indicator	Alerts if systolic/diastolic readings are high
Multi-User Memory	Stores readings for up to 2 users (100 readings each)
Body Movement Detection	Detects and alerts if movement affects accuracy
Large LCD Display	Clear backlit display for easy reading
Date & Time Stamp	Records measurement date and time
Average Reading	Calculates average of last 3 readings
Automatic Power Off	Conserves battery life
WHO Indicator	Color-coded blood pressure classification

Safety Precautions

Read all instructions before use. Consult physician for proper monitoring.

Do not use on infants, children, or pets.
Do not use while operating vehicles or machinery.
Do not use if cuff is damaged or tubing is cracked.
Do not disassemble or modify the device.
Keep away from electromagnetic interference sources.

WARNING! This device is for personal health monitoring only, not for medical diagnosis. Always consult your doctor about your readings.

Device Components

Identify all parts before use.

Main Unit: Contains display, control buttons, and internal pump.
Arm Cuff: Wraps around upper arm with Velcro closure.
Air Tube: Connects cuff to main unit.
START/STOP Button: Initiates and stops measurement.
MEMORY Button: Accesses stored readings.
SET Button: Configures date, time, and user settings.
AC Adapter Port: For optional AC power connection.
Battery Compartment: Holds 4 AA batteries.

CAUTION! Ensure all components are present and undamaged before first use.

Specifications

Measurement Method: Oscillometric method.
Measurement Range: Pressure: 0-299 mmHg; Pulse: 40-180 beats/min.
Accuracy: Pressure: ±3 mmHg; Pulse: ±5% of reading.
Memory: 100 readings x 2 users.
Power Source: 4 AA batteries or AC adapter (optional).
Battery Life: Approximately 300 measurements.
Display: LCD with backlight.
Cuff Size: Fits arm circumference 22-32 cm.
Operating Conditions: Temperature: 10°C to 40°C; Humidity: 30% to 85% RH.
Storage Conditions: Temperature: -20°C to 60°C; Humidity: 10% to 95% RH.

Initial Setup

Prepare device for first use.

Insert batteries: Open compartment, insert 4 AA batteries observing polarity.
Set date and time: Press SET button, use arrows to adjust, press SET to confirm.
Attach cuff: Connect air tube to main unit until it clicks.
Select user: Press SET to choose USER 1 or USER 2.
Test device: Perform a measurement without wearing cuff to ensure proper inflation/deflation.

Tip: Use fresh alkaline batteries for best performance. Remove batteries if not using for extended periods.

Taking a Measurement

For accurate results, follow these steps carefully.

Sit comfortably with back supported and feet flat on floor.
Rest for 5 minutes before measuring.
Wrap cuff on bare upper arm 1-2 cm above elbow.
Position cuff at heart level with tube facing downward.
Press START/STOP button to begin measurement.
Remain still and quiet during inflation and deflation.
Readings display automatically when complete.
Press START/STOP to turn off or wait for auto power-off.

Important: Do not talk or move during measurement. Take measurements at same time each day for consistency.

Understanding Results

The display shows systolic pressure, diastolic pressure, and pulse rate.

Symbol	Meaning
SYS	Systolic blood pressure (higher number)
DIA	Diastolic blood pressure (lower number)
PULSE	Heart rate in beats per minute
Irregular Heartbeat Symbol	Detected irregular rhythm during measurement
Movement Symbol	Excessive movement detected
WHO Indicator	Color bar showing classification (green/yellow/red)
Memory Symbol	Indicates reading is stored
User Indicator	Shows which user profile is active

Note: Single readings may vary. Track trends over time rather than individual measurements.

Memory Function

Store and review past measurements.

Press MEMORY button to enter memory mode.
Use arrows to scroll through stored readings.
Each reading shows date, time, systolic, diastolic, and pulse.
Press and hold MEMORY to delete all readings for current user.
Average function shows average of last 3 readings.

Tip: Regular review of stored readings helps identify patterns for discussion with your doctor.

Care & Maintenance

Proper care ensures accurate measurements and device longevity.

Clean cuff with mild soap and damp cloth; air dry completely.
Wipe main unit with dry soft cloth.
Never immerse device in water or use harsh chemicals.
Store in provided case in cool, dry place.
Replace batteries when low battery symbol appears.
Inspect cuff regularly for wear or damage.

CAUTION! Do not wash cuff in washing machine. Do not expose to extreme temperatures or direct sunlight.

Regulatory Information

FDA Cleared: This device complies with FDA regulations for home blood pressure monitors. CE Marked: Meets European medical device directives. Manufactured under ISO 13485 quality standards. Copyright © Omron Healthcare, Inc. All rights reserved. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace all 4 batteries with fresh alkaline batteries.
Error E1 displayed	Cuff not properly attached	Check cuff connection; ensure tube is fully inserted.
Error E2 displayed	Measurement error	Reposition cuff at heart level; remain still; retry measurement.
Inaccurate readings	Wrong cuff position	Ensure cuff is on bare skin 1-2 cm above elbow at heart level.
Cuff doesn't inflate	Blocked air tube	Check for kinks in tube; ensure proper connection.
Memory not working	Batteries very low	Replace batteries; data may be lost if batteries completely drain.
Irregular heartbeat symbol always on	Medical condition	Consult physician if symbol appears consistently.

Reset: Remove batteries for 5 minutes to reset device.

Service: 1-800-634-4350; www.omronhealthcare.com