Omron BP 7350 Instruction Manual

The Omron BP 7350 is an upper arm blood pressure monitor with IntelliSense technology for accurate and comfortable readings. It features a wide-range D-Ring cuff (22-42 cm), irregular heartbeat detection, hypertension indicator, 60 memory storage with date and time stamp, body movement detection, and an easy-to-read backlit display. Below are key sections for safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Safety Information 3. Parts Identification 4. Initial Setup 5. Taking a Measurement 6. Understanding the Display 7. Memory Function 8. Troubleshooting 9. Care & Maintenance 10. Specifications 11. Warranty & Support

Features at a Glance

Key components: Main unit with backlit display, D-Ring cuff, AC adapter, storage case, instruction manual.

Feature	Description
IntelliSense Technology	Automatically inflates to optimal pressure for comfortable measurement
D-Ring Cuff	Pre-formed cuff (22-42 cm) for easy self-application
Irregular Heartbeat Detection	Detects and displays irregular heartbeat during measurement
Hypertension Indicator	Displays warning symbol if systolic/diastolic readings are high
60 Memory Storage	Stores readings with date and time for two users (30 each)
Body Movement Detection	Alerts if movement is detected during measurement
Backlit Display	Easy-to-read LCD with illumination for low-light conditions
Date & Time Stamp	Automatic recording of measurement time
Average Reading	Calculates average of last three readings taken within 10 minutes
AC Adapter Option	Can be powered by AC adapter (included) or 4 AA batteries

Safety Information

Read all instructions before use. For accurate measurements and safe operation.

Do not use on infants, children, or persons unable to express themselves.
Do not use while charging batteries or if the device is wet.
Consult your physician before use if you have arrhythmia, atherosclerosis, or other circulatory disorders.
Do not use in areas with high humidity or where flammable gases are present.
Remove the cuff immediately if you feel pain or numbness.

WARNING! This device is not a substitute for professional medical diagnosis. Always consult your physician regarding your blood pressure.

Parts Identification

Familiarize yourself with the device components.

Main Unit: Contains display, control buttons, and air connector.
D-Ring Cuff: Pre-formed cuff with metal ring and Velcro closure.
Air Plug: Connects cuff tube to main unit.
START/STOP Button: Initiates and stops measurement.
MEMORY Button: Accesses stored readings.
SET Button: Sets date, time, and user selection.
Display: Shows systolic/diastolic pressure, pulse, and icons.
AC Adapter Jack: For connecting AC adapter (optional).
Battery Compartment: Holds 4 AA batteries.

CAUTION! Ensure all parts are clean, dry, and undamaged before use.

Initial Setup

Prepare the device for first use.

Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity, close cover.
Set date and time: Press SET button, use START/STOP to adjust values, press SET to confirm.
Connect cuff: Insert air plug into main unit connector until it clicks.
Apply cuff correctly: Place cuff on bare upper arm 1-2 cm above elbow, align artery marker with brachial artery, secure with Velcro.

Tip: For most accurate results, rest for 5 minutes before measuring and avoid talking or moving during measurement.

Taking a Measurement

Follow these steps for accurate blood pressure measurement.

Sit comfortably with feet flat on floor and back supported.
Apply cuff to left arm (unless instructed otherwise by physician).
Rest arm on table with cuff at heart level.
Press START/STOP button. Device will inflate automatically.
Remain still and quiet during measurement.
Reading displays when measurement is complete. Device deflates automatically.
Record reading if desired, or it will be stored automatically.
Remove cuff after measurement is complete.

WARNING! Do not inflate cuff when not wrapped around arm. Do not use on injured or sore arm.

Understanding the Display

The LCD shows various icons and readings.

Symbol	Meaning
SYS/ mmHg	Systolic blood pressure reading
DIA/ mmHg	Diastolic blood pressure reading
Pulse icon & value	Heart rate per minute
Irregular Heartbeat icon	Detected irregular heartbeat during measurement
Hypertension Indicator	Warning symbol for high blood pressure reading
Body Movement icon	Excessive movement detected
Memory icon (1 or 2)	User 1 or User 2 memory bank
Date & Time	Measurement timestamp
Average icon	Display of average reading
Low Battery icon	Replace batteries soon

Memory Function

Stores up to 60 readings (30 per user).

Select user: Press SET button to toggle between User 1 and User 2.
View memory: Press MEMORY button to scroll through stored readings.
Delete memory: While in memory mode, press and hold MEMORY button for 3 seconds to clear current user's memory.
Average reading: Automatically calculates average of last three readings taken within 10 minutes.

Note: Memory is maintained when batteries are replaced if done within 3 minutes.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace with new AA batteries or use AC adapter.
Error E1 displayed	Cuff not properly attached	Check cuff connection; reattach air plug securely.
Error E2 displayed	Measurement error	Ensure cuff is properly positioned; remain still; retake measurement.
Error E3 displayed	Excessive movement	Keep arm still during measurement; retake reading.
Inconsistent readings	Incorrect cuff position	Reposition cuff at heart level; ensure proper fit (not too tight/loose).
Device won't turn on	Battery polarity incorrect	Check battery orientation; reinsert correctly.
Cuff doesn't inflate	Air leak in tube or cuff	Check for damage; ensure air plug is fully inserted.

Reset: Remove batteries for 3 minutes to reset device to factory settings (memory will be cleared).

Care & Maintenance

Proper care ensures accurate measurements and device longevity.

Clean with soft, dry cloth only. Do not use alcohol, benzene, or abrasive cleaners.
Store in cool, dry place away from direct sunlight and extreme temperatures.
Remove batteries if device will not be used for extended period.
Do not disassemble or attempt repairs. Contact authorized service center.
Replace cuff if it becomes damaged or loses elasticity.

CAUTION! Never immerse device in water or other liquids. Do not use near oxygen tanks or flammable gases.

Specifications

Measurement Method: Oscillometric
Pressure Range: 0-299 mmHg
Pulse Range: 40-180 beats/minute
Cuff Size: 22-42 cm (arm circumference)
Memory: 60 readings (30 per user) with date/time
Power Source: 4 AA batteries or AC adapter (6V DC, 600mA)
Battery Life: Approximately 300 measurements (alkaline batteries)
Display: LCD with backlight
Dimensions: Approx. 123mm (W) x 105mm (H) x 141mm (D)
Weight: Approx. 365g (without batteries)
Operating Conditions: 10°C to 40°C, 30% to 85% humidity
Storage Conditions: -20°C to 60°C, 10% to 95% humidity

Warranty & Support

Omron Healthcare, Inc. provides limited warranty for this device. Refer to warranty card for details.

Customer Support: For questions or assistance:

Website: www.omronhealthcare.com
Phone: 1-800-634-4350
Email: [email protected]

Service Centers: Authorized service centers available nationwide. Check website for locations.

Regulatory: This device complies with Part 15 of FCC Rules. CE marked. Medical device classification according to applicable regulations.

Disposal: Dispose of device and batteries according to local regulations. Do not dispose with household waste.