Omron BP 7100 Blood Pressure Monitor Manual

The Omron BP 7100 is an automatic upper-arm blood pressure monitor featuring IntelliSense technology for accurate and comfortable readings, a large backlit display, hypertension indicator, irregular heartbeat detection, 2-user memory with 100 readings each, date and time display, and body movement detection. Powered by 4 AA batteries or AC adapter. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with display, Arm cuff with D-ring, AC adapter, Storage case, Instruction manual.

Safety Precautions

Read all instructions before use. For accurate measurements and safety:

1. Do not use on infants, children, or persons who cannot express themselves.
2. Consult physician before use if you have arrhythmia, other heart problems, or are pregnant.
3. Do not use during bathing or showering.
4. Do not disassemble or modify the device.
5. Keep away from children and pets.

WARNING! This device is for home use only, not for professional medical diagnosis. Always follow your healthcare provider's instructions.

Package Contents

Unpack and verify all components are present:

• Omron BP 7100 Blood Pressure Monitor (main unit)
• Arm Cuff (22-42 cm circumference)
• AC Adapter
• Storage Case
• Instruction Manual
• Warranty Card
• 4 AA Batteries (may be included depending on region)

CAUTION! If any item is missing or damaged, contact customer service immediately. Do not use damaged components.

Specifications

• Measurement Method: Oscillometric method
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/minute
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
• Memory: 100 readings for each of 2 users
• Cuff Size: 22-42 cm (8.7-16.5 inches) arm circumference
• Power Source: 4 AA batteries or AC adapter (6V DC, 600mA)
• Battery Life: Approximately 300 measurements with alkaline batteries
• Display: LCD with backlight
• Operating Conditions: Temperature: 10°C to 40°C (50°F to 104°F), Humidity: 30% to 85% RH
• Dimensions: 123mm (W) × 85mm (H) × 141mm (D)
• Weight: Approximately 340g (without batteries)

Parts Identification

Front Panel: START/STOP button, MEMORY button, USER 1/USER 2 buttons, Display screen. Rear: Battery compartment, AC adapter jack, Cuff connector.

Display Symbols: User indicator, Systolic pressure, Diastolic pressure, Pulse rate, Hypertension indicator, Irregular heartbeat symbol, Cuff wrap guide, Body movement detection, Battery indicator, Date and time, Memory recall number.

Initial Setup

Before first use, install batteries or connect AC adapter, set date and time, and apply cuff properly.

1. Install batteries: Open battery compartment, insert 4 AA batteries observing polarity, close cover.
2. Set date and time: Press and hold MEMORY button for 3 seconds, use START/STOP to adjust values.
3. Connect cuff: Plug cuff tube into cuff connector on side of unit until it clicks.
4. Apply cuff: Wrap cuff on bare upper arm 1-2 cm above elbow, align artery marker with brachial artery.

Tip: For most accurate readings, rest for 5 minutes before measuring, avoid caffeine, smoking, and exercise for 30 minutes prior.

Taking a Measurement

Follow these steps for accurate blood pressure measurement:

1. Sit comfortably with feet flat on floor, back supported, and arm resting on table at heart level.
2. Apply cuff properly as described in Initial Setup.
3. Select user: Press USER 1 or USER 2 button (LED will indicate selected user).
4. Start measurement: Press START/STOP button. Cuff will inflate automatically.
5. Remain still and quiet during measurement. Do not move arm or talk.
6. Read results: Systolic, diastolic, and pulse rate will display when measurement completes.
7. Cuff deflation: Cuff deflates automatically after measurement.
8. View average: Press START/STOP within 1 minute to see average of last 3 readings.

WARNING! Do not inflate cuff when not wrapped around arm. Do not take measurements more than 3 times consecutively; wait 5 minutes between measurements.

Memory Function

The device stores 100 readings for each of 2 users with date and time stamp.

1. To recall memory: Press MEMORY button to view stored readings.
2. Navigate readings: Press USER 1 or USER 2 to switch between users. Press START/STOP to scroll through readings.
3. Clear memory: Press and hold USER 1 and USER 2 simultaneously for 3 seconds to clear all readings for selected user.
4. Average calculation: Device automatically calculates average of last 3 readings taken within 10 minutes.

Note: Memory is maintained when batteries are replaced if done within 3 minutes. For longer battery replacement, memory may be lost.

Care & Maintenance

Proper care ensures accurate measurements and extends device life.

• Clean monitor with soft, dry cloth. Do not use alcohol, benzene, thinner, or other chemicals.
• Clean cuff with mild soap and damp cloth, then air dry completely before storage.
• Store in carrying case when not in use, away from direct sunlight, high temperature, humidity, and dust.
• Remove batteries if device will not be used for 3 months or longer.
• Replace cuff every 2-3 years or if showing signs of wear or damage.

CAUTION! Never immerse monitor in water or other liquids. Do not autoclave or sterilize with ethylene oxide gas.

Regulatory Information

FDA Cleared: KXXXXXX. CE Marked: Medical Device Directive 93/42/EEC. Manufactured for Omron Healthcare, Inc. Copyright © Omron Healthcare, Inc. All rights reserved. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Reset: Remove batteries and AC adapter for 5 minutes, then reconnect to reset device.

Service: 1-800-634-4350; www.omronhealthcare.com