Omron Blood Pressure Monitor Manual IP20

The Omron Blood Pressure Monitor IP20 is a clinically validated, automatic upper arm blood pressure monitor designed for home use. It features IntelliSense technology for accurate and comfortable readings, a large LCD display with backlight, hypertension indicator, irregular heartbeat detector, memory storage for multiple users, and body movement detection. Powered by batteries or optional AC adapter. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Precautions 3. Package Contents 4. Device Overview 5. First-Time Setup 6. Taking a Measurement 7. Understanding Your Readings 8. Memory Function 9. Care & Maintenance 10. Specifications 11. Troubleshooting

Features at a Glance

Key components: Main unit with LCD display, Upper Arm Cuff, AC Adapter (optional), Batteries, Instruction Manual, and Storage Case.

Feature	Description
IntelliSense Technology	Automatically inflates to optimal pressure for comfortable measurement
Hypertension Indicator	Displays warning symbol if reading exceeds standard levels
Irregular Heartbeat Detector	Detects and displays irregular heartbeat during measurement
Body Movement Detection	Alerts if excessive movement is detected during measurement
Memory Storage	Stores up to 100 readings with date and time stamp
Multi-User Function	Supports memory for two separate users
Large LCD Display	Clear backlit display with easy-to-read numbers
Cuff Wrap Guide	Indicates proper cuff placement for accurate readings
Automatic Power Off	Conserves battery life by turning off after 1 minute of inactivity
World Health Organization (WHO) Indicator	Color-coded display shows blood pressure classification

Safety Precautions

Read all instructions before use to ensure safe and accurate operation.

Do not use on infants, young children, or persons unable to express themselves.
Consult your physician before use if you have arrhythmia, atherosclerosis, or other circulatory disorders.
Do not use the monitor on an arm with an intravenous drip or surgical wound.
Do not inflate the cuff when it is not wrapped around your arm.
Keep the monitor away from children to prevent accidental swallowing of small parts.

WARNING! This device is for home use only and is not intended to replace professional medical diagnosis. Consult your doctor for interpretation of readings.

Package Contents

Unpack and verify all components are present.

Main Unit: 1
Upper Arm Cuff (22-32 cm): 1
Instruction Manual: 1
Storage Case: 1
AAA Batteries: 4
Warranty Card: 1

Note: AC Adapter (Model EA-AC10) is sold separately.

Device Overview

Familiarize yourself with the monitor's controls and display symbols.

Front Panel: START/STOP Button, MEMORY Button, USER Button (1/2), POWER Button.

LCD Display: Shows systolic/diastolic pressure, pulse rate, date/time, user indicator, memory index, battery level, hypertension symbol, irregular heartbeat symbol, body movement symbol, and WHO indicator bar.

Cuff: Contains air tube connector, metal D-ring, and artery mark for proper positioning.

First-Time Setup

Prepare the monitor for first use.

Insert Batteries: Open battery compartment, insert 4 AAA batteries observing polarity.
Connect Cuff: Plug the cuff tube firmly into the port on the left side of the monitor.
Set Date and Time: Press and hold the MEMORY button for 3 seconds, then use START/STOP to adjust values.
Select User: Press USER button to select User 1 or User 2 for memory storage.

CAUTION! Use only recommended batteries. Do not mix old and new batteries.

Taking a Measurement

For accurate readings, follow these steps carefully.

Rest for 5 minutes before measuring. Avoid eating, smoking, or exercising 30 minutes prior.
Sit comfortably on a chair with feet flat on the floor and back supported.
Wrap the cuff on your bare upper left arm. The artery mark (△) should align with your brachial artery.
Position the cuff 1-2 cm above your elbow. The tube should run down the center of your arm.
Rest your arm on a table so the cuff is at heart level.
Press the START/STOP button. The cuff will inflate automatically.
Remain still and quiet until measurement is complete and the cuff deflates.
Read your systolic/diastolic pressure and pulse rate on the display.

Tip: Take measurements at the same time each day for consistent tracking.

Understanding Your Readings

The monitor displays several symbols and values.

Symbol/Value	Meaning
Systolic Pressure	Upper number (e.g., 120) - pressure when heart beats
Diastolic Pressure	Lower number (e.g., 80) - pressure when heart rests
Pulse Rate	Heartbeats per minute (e.g., 72)
WHO Indicator Bar	Color-coded: Green (Normal), Yellow (Prehypertension), Red (Hypertension)
Irregular Heartbeat Symbol	Appears if an irregular rhythm is detected during measurement
Body Movement Symbol	Appears if excessive movement is detected
Hypertension Symbol	Appears if systolic ≥135 mmHg or diastolic ≥85 mmHg

Memory Function

The monitor stores up to 100 total readings (shared between two users).

View Memory: Press MEMORY button to cycle through stored readings with date/time.
Select User: Press USER button to switch between User 1 and User 2 memory.
Clear Memory: Press and hold USER and MEMORY buttons simultaneously for 3 seconds to clear current user's memory.
Average Reading: The display shows the average of the last three readings taken within 10 minutes.

Note: Memory is retained when batteries are replaced if done within 3 minutes.

Care & Maintenance

Proper care ensures long-term accuracy and reliability.

Clean the monitor and cuff with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners.
Store in the provided case in a cool, dry place away from direct sunlight and extreme temperatures.
Do not bend the air tube excessively or pull it forcefully.
Remove batteries if the monitor will not be used for an extended period.
The cuff is not washable. Replace if it becomes dirty or damaged.

CAUTION! Do not disassemble or attempt to repair the monitor. Contact authorized service.

Specifications

Measurement Method: Oscillometric
Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/min
Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
Memory: 100 readings for 2 users
Cuff Size: 22-32 cm (upper arm circumference)
Power Source: 4 x AAA batteries or AC adapter (optional)
Battery Life: Approximately 300 measurements
Dimensions: 123mm (W) x 85mm (H) x 141mm (D)
Weight: Approximately 300g (without batteries)
Operating Conditions: Temperature: 10°C to 40°C, Humidity: 30% to 85% RH

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace all batteries with new ones.
Error Code "E" appears	Cuff not wrapped properly	Rewrap cuff correctly and restart measurement.
Inconsistent readings	Body movement, talking	Remain still and silent during measurement.
Cuff does not inflate	Air tube not connected	Ensure tube is firmly plugged into monitor.
Memory lost	Batteries removed too long	Replace batteries within 3 minutes to retain memory.
Irregular heartbeat symbol flashes	Arrhythmia detected	Consult your physician if symbol appears frequently.

Reset: Remove batteries, wait 1 minute, then reinsert.

Service: For technical support, contact Omron Healthcare at 1-800-634-4350 or visit www.omronhealthcare.com.