omron blood pressure monitor manual bp786n

The Omron BP786N is a 10 Series upper arm blood pressure monitor with Advanced Accuracy, dual display for users, TrueRead technology, irregular heartbeat detection, hypertension detection, body movement detection, 200 memory storage (100 per user), date and time stamp, AC adapter compatibility, and a wide-range D-Ring cuff (fits arms 9" to 17" in circumference). Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with dual display, D-Ring cuff, AC adapter, storage case, instruction manual, and quick start guide.

Safety Information

Read all instructions before use. For accurate readings and safe operation.

1. Intended for home use only; not for professional medical diagnosis.
2. Do not use on infants, children, or persons unable to express themselves.
3. Consult your physician before use if you have arrhythmia, preeclampsia, or other circulatory disorders.
4. Do not use on an injured or sore arm.
5. Wait at least 5 minutes between measurements on the same person.

WARNING! Do not modify the device. Keep away from children. Use only the provided AC adapter.

Device Overview

Front Panel: START/STOP button, USER 1/USER 2 buttons, MEMORY button, SET button, Clock display, Systolic/Diastolic/Pulse displays.

Cuff: D-Ring design with metal ring, air tube connector, and artery position marker.

AC Adapter Port: Located on the side of the main unit.

Battery Compartment: Holds 4 AA batteries (not included).

Specifications

• Measurement Method: Oscillometric (upper arm).
• Measurement Range: Pressure: 0-299 mmHg; Pulse: 40-180 beats/min.
• Memory: 200 total readings (100 per user).
• Cuff Size: 9" to 17" circumference (22 cm to 42 cm).
• Power Source: 4 AA batteries or AC adapter (included).
• Accuracy: Pressure: ±3 mmHg; Pulse: ±5% of reading.
• Display: LCD digital display.
• Operating Conditions: 50°F to 104°F (10°C to 40°C); 15% to 85% humidity.
• Storage Conditions: 14°F to 140°F (-10°C to 60°C); 10% to 95% humidity.

Initial Setup

Power on device; set date and time.

1. Insert batteries: Open battery compartment, insert 4 AA batteries (or connect AC adapter).
2. Set date and time: Press SET button, use START/STOP to adjust values, press SET to confirm.
3. Select user: Press USER 1 or USER 2 button to select your profile.
4. Apply cuff: Wrap cuff on bare upper left arm, align artery marker with artery, secure with D-Ring.

CAUTION! Ensure cuff is snug but not too tight. Arm should be supported at heart level.

Taking a Measurement

For most accurate results, measure at the same time each day.

1. Sit comfortably with feet flat on floor, back supported.
2. Rest for 5 minutes before measuring.
3. Apply cuff to left upper arm as described.
4. Press START/STOP button. Device will inflate automatically.
5. Remain still and quiet during measurement.
6. Reading displays systolic, diastolic pressure, and pulse rate.
7. Cuff deflates automatically. Press START/STOP to turn off.

Tip: Avoid eating, smoking, exercising, or drinking caffeine 30 minutes before measurement.

Understanding the Display

Main Display: Shows systolic/diastolic pressure (mmHg) and pulse rate (bpm).

Icons: User indicator (1 or 2), Memory full, Irregular heartbeat, Body movement, Hypertension indicator, Low battery, Date/Time.

Error Codes: E1 (Cuff not attached properly), E2 (Measurement error), E3 (Pulse rate out of range), E5 (Cuff over-inflated).

Memory Recall & Average

Recall past readings or view average of last 3 readings.

1. Press MEMORY button to enter memory mode.
2. Use START/STOP to scroll through stored readings (shows date/time).
3. Press USER 1 or USER 2 to switch between user memories.
4. To view average of last 3 readings, press MEMORY twice in quick succession.
5. Press START/STOP to exit memory mode.

Note: Memory is retained when batteries are removed or replaced.

Care & Maintenance

Clean with soft, dry cloth only. Do not immerse in water or use solvents.

1. Remove batteries if device will not be used for extended period.
2. Store in provided case in a cool, dry place.
3. Inspect cuff regularly for cracks or wear.
4. Do not expose to extreme temperatures, humidity, dust, or direct sunlight.

CAUTION! Do not disassemble or attempt repairs. Use only Omron-approved accessories.

Regulatory Information

FDA Cleared: K number [insert if applicable]. FCC Part 15: Class B digital device; complies with interference limits. CE Marked: Meets EU medical device directives. Manufactured for Omron Healthcare, Inc. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Reset: Remove batteries, wait 1 minute, reinsert batteries.

Service: 1-800-634-4350; www.omronhealthcare.com