omron blood pressure monitor manual bp7250

The Omron BP7250 is an upper arm blood pressure monitor with IntelliSense technology for accurate, comfortable readings. It features a wide-range D-Ring cuff (22-42 cm), dual LCD displays, hypertension indicator, morning hypertension indicator, 100 memory storage with date and time stamp, irregular heartbeat detection, body movement detection, and averaging of the last three readings. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. First-Time Setup 4. Specifications 5. Controls and Display 6. Taking a Measurement 7. Memory Function 8. Indicator Symbols 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with dual LCD displays, D-Ring Cuff, AC Adapter, Instruction Manual, Storage Case.

Feature	Description
IntelliSense Technology	Automatically inflates to the optimal level for comfortable measurement
Dual LCD Display	Shows systolic/diastolic pressure and pulse simultaneously
Hypertension Indicator	Displays symbol if reading is in hypertension range
Morning Hypertension Indicator	Flags readings taken in the morning (6am-10am)
100 Memory Storage	Stores readings with date and time stamp for two users
Irregular Heartbeat Detection	Detects and displays symbol for irregular heartbeats during measurement
Body Movement Detection	Alerts if movement is detected during measurement
Average of Last 3 Readings	Calculates and displays average of last three readings taken within 10 minutes
D-Ring Cuff (22-42cm)	Easy-to-wrap wide-range cuff for proper fit
Power Options	4 x AA batteries or AC adapter (included)

Package Contents

Unpack and inspect all contents before use.

Omron BP7250 Blood Pressure Monitor (Main Unit)
D-Ring Cuff (22-42 cm circumference)
AC Adapter
Instruction Manual
Storage Case
4 x AA batteries (for initial use)

WARNING! Do not use if any components are damaged. Contact customer service for replacement.

First-Time Setup

Prepare the monitor for first use.

Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
Connect AC adapter: Plug into DC jack on side of unit and into wall outlet (optional).
Set date and time: Press and hold CLOCK button, use MEMORY button to adjust values.
Attach cuff: Insert cuff tube into cuff port until it clicks.
Select user: Press USER button to select User 1 or User 2 for memory storage.

CAUTION! Use only specified AC adapter. Do not mix old and new batteries.

Specifications

Measurement Method: Oscillometric
Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/min
Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
Memory: 100 readings (50 per user) with date/time stamp
Cuff Size: 22-42 cm arm circumference (D-Ring)
Power Supply: 4 x AA batteries (1.5V) or AC adapter (6V DC, 600mA)
Display: Dual LCD with backlight
Operating Conditions: 10°C to 40°C, 15% to 85% RH
Storage Conditions: -20°C to 60°C, 10% to 95% RH
Weight: Approximately 350g (without batteries)

Controls and Display

Front Panel: START/STOP button, USER button, MEMORY button, CLOCK button.

Display Symbols: User indicator (1/2), Memory full, Battery low, Hypertension, Morning, Irregular heartbeat, Body movement, Average, Clock, Systolic/Diastolic/Pulse readings.

Settings: Press and hold CLOCK to set date/time. Press USER to switch between users. Press MEMORY to review stored readings.

Taking a Measurement

For accurate readings, follow these steps carefully.

Rest for 5 minutes before measuring. Avoid eating, smoking, or exercising 30 minutes prior.
Sit comfortably with feet flat on floor, back supported, and arm resting on table at heart level.
Wrap cuff on bare upper arm 1-2 cm above elbow. Ensure air tube is centered over artery.
Press START/STOP button. Monitor will inflate automatically.
Remain still and quiet during measurement. Do not move arm or talk.
Reading displays when complete. Cuff deflates automatically.
Note symbols: Hypertension, Irregular heartbeat if present.
For average: Take 2 more readings within 10 minutes; average displays automatically.

Tip: Take measurements at the same time each day for consistent tracking.

Memory Function

Stores 100 total readings (50 per user).

Select user: Press USER button to choose User 1 or User 2 before measurement.
View memory: Press MEMORY button to scroll through stored readings for selected user.
Clear memory: Press and hold MEMORY button for 3 seconds while in memory mode to clear all readings for selected user.
Memory full: Symbol appears when memory is full for selected user.

Note: Date and time are stored with each reading if clock is set.

Indicator Symbols

Understanding display symbols.

Symbol	Meaning
User 1 / User 2	Indicates which user is selected
Hypertension	Systolic ≥135 mmHg or Diastolic ≥85 mmHg
Morning	Reading taken between 6:00 AM and 10:00 AM
Irregular Heartbeat	Detected during measurement
Body Movement	Excessive movement detected
Memory Full	50 readings stored for selected user
Battery Low	Replace batteries soon
Average	Displaying average of last 3 readings

Care & Cleaning

Remove batteries before cleaning. Use soft, dry cloth only.

Cuff: Wipe with damp cloth and mild detergent. Air dry completely.
Monitor: Wipe with dry cloth. Do not use alcohol, benzene, or thinner.
Storage: Keep in storage case in cool, dry place away from direct sunlight.
Batteries: Remove if not using for extended period.

CAUTION! Do not immerse in water. Do not wash cuff in washing machine.

Regulatory Information

FDA Cleared: KXXXXXX. This device complies with Part 15 of FCC Rules. CE Marked: Meets EU medical device directives. Manufactured for Omron Healthcare, Inc. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Disposal: Dispose of according to local regulations. Do not dispose of batteries in fire.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace all 4 batteries with new ones.
Error E1, E2, E3	Cuff not attached/leaking	Ensure cuff is connected properly; check for leaks or damage.
Error E4, E5	Signal error during measurement	Reposition cuff; remain still; retake measurement.
Inconsistent readings	Improper posture/cuff position	Sit correctly with arm at heart level; ensure proper cuff fit.
Memory not storing	Memory full/user not selected	Clear memory for user; press USER to select correct user before measuring.
Cuff does not inflate	Blocked air tube/batteries low	Check tube for kinks; replace batteries.

Reset: Remove batteries for 5 minutes to reset unit.

Service: 1-800-634-4350; www.omronhealthcare.com