Omron Blood Pressure Monitor Manual BP 786

The Omron BP 786 is an upper arm blood pressure monitor with IntelliSense technology for comfortable inflation, a wide-range D-Ring cuff (22-42 cm), dual LCD displays for systolic/diastolic pressure and pulse readings, hypertension indicator, irregular heartbeat detection, memory storage for two users (200 readings total), date/time display, and AC adapter or battery operation. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with dual LCD displays, D-Ring Cuff (22-42 cm), AC adapter, storage case, instruction manual, and quick start guide.

Setup & Installation

Unpack and inspect all components. Ensure monitor is at room temperature before use.

1. Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
2. Connect AC adapter: Plug adapter into DC jack on monitor, then into wall outlet.
3. Set date/time: Press CLOCK button, use MEMORY button to adjust values.
4. Apply cuff: Wrap D-Ring cuff around bare upper arm, align artery marker with brachial artery.

WARNING! Do not use on infants, children, or persons with arrhythmia without medical supervision. Ensure cuff is proper size for accurate readings.

First-Time Use

Prepare for accurate measurement by following proper procedure.

1. Rest quietly: Sit comfortably with back supported for 5 minutes before measuring.
2. Position arm: Place cuff on left arm at heart level, palm facing upward.
3. Start measurement: Press START/STOP button, remain still and quiet during inflation/deflation.
4. Read results: Systolic/diastolic pressure and pulse display automatically.
5. Store reading: Press MEMORY button to save reading to selected user memory.

CAUTION! Avoid eating, smoking, exercising, or consuming caffeine 30 minutes before measurement. Do not move or talk during measurement.

Specifications

• Measurement Method: Oscillometric (upper arm).
• Measurement Range: Pressure: 0-299 mmHg; Pulse: 40-180 beats/minute.
• Accuracy: Pressure: ±3 mmHg; Pulse: ±5% of reading.
• Cuff Size: 22-42 cm (arm circumference).
• Memory: 200 readings (100 per user) with date/time.
• Display: Dual LCD with backlight.
• Power Source: 4 AA batteries or AC adapter (6V DC).
• Battery Life: Approximately 500 measurements (alkaline batteries).
• Operating Conditions: Temperature: 10°C-40°C; Humidity: 30%-85% RH.
• Dimensions: Main unit: 154mm × 119mm × 97mm; Weight: Approximately 400g (without batteries).

Controls & Display

Front Panel: START/STOP button, MEMORY button, CLOCK button, USER SELECT button.

Display Symbols: User 1/2 indicator, Memory full, Battery low, Hypertension, Irregular heartbeat, Heart symbol during measurement, Date/Time, Average value.

Memory Functions: Press MEMORY to store current reading. Press and hold MEMORY to review stored readings. USER SELECT toggles between User 1 and User 2. CLOCK sets date and time. AVERAGE displays average of last 3 readings.

Taking Measurements

For most accurate results, follow these steps precisely.

1. Sit comfortably with feet flat on floor, back supported.
2. Place cuff on bare left arm 1-2 cm above elbow.
3. Position cuff tube along inner arm, align artery marker with brachial artery.
4. Secure cuff snugly but not too tight (should fit one finger underneath).
5. Rest arm on table at heart level, palm up.
6. Press START/STOP button, remain still and quiet.
7. Monitor displays heart symbol during measurement, then shows results.
8. To store, press MEMORY within 1 minute after measurement.

Tip: Take measurements at same time each day for consistent tracking. Avoid crossing legs during measurement.

Memory & Data Management

Two-user memory system with 100 readings storage per user.

1. Select user: Press USER SELECT to choose User 1 or User 2.
2. Store reading: After measurement, press MEMORY to save (date/time automatically recorded).
3. Review memory: Press and hold MEMORY to scroll through stored readings.
4. Average reading: Press MEMORY twice quickly to display average of last 3 readings.
5. Clear memory: To clear all readings for current user, remove batteries and AC adapter for 1 minute, then reinsert while holding MEMORY button.

Note: Memory full indicator appears when 100 readings stored. Oldest readings are overwritten when memory is full.

Care & Maintenance

Clean monitor with soft, dry cloth only. Do not use water, chemicals, or abrasives.

1. Cuff care: Wipe with damp cloth if soiled, air dry completely before storage.
2. Storage: Keep in storage case in cool, dry place away from direct sunlight.
3. Battery replacement: Replace when low battery symbol appears. Remove if not using for extended period.
4. Avoid: Extreme temperatures, humidity, dust, strong magnetic fields, and dropping.

CAUTION! Do not immerse in water. Do not disassemble. Do not use if damaged. Have unit serviced only by authorized Omron service centers.

Regulatory Information

FDA Cleared: K number [insert if applicable]. CE Marked: Medical Device Directive 93/42/EEC. Manufactured for Omron Healthcare, Inc. Copyright © [Year] Omron Healthcare, Inc. All rights reserved. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Reset: Remove batteries and AC adapter for 1 minute to reset unit.

Service: 1-800-634-4350; www.omronhealthcare.com