Omron Blood Pressure Monitor BP786N Manual

The Omron BP786N is an advanced upper arm blood pressure monitor with IntelliWrap Cuff technology, dual LCD displays, and Bluetooth connectivity for tracking measurements via the OMRON Connect app. It features irregular heartbeat detection, hypertension indicator, morning hypertension check, and memory for up to 200 readings for two users. Below are key sections for safety, features, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main unit, IntelliWrap Cuff (22-42 cm), AC adapter, instruction manual, quick start guide, OMRON Connect app download instructions.

Safety Precautions

Read all instructions before use. Not a substitute for professional medical advice.

1. Do not use on infants, children, or persons unable to express themselves.
2. Do not use during or immediately after physical exercise or bathing.
3. Ensure cuff is at heart level during measurement.
4. Do not inflate cuff when not wrapped around arm.
5. Use only the specified AC adapter.

WARNING! Consult your physician before use if you have arrhythmia, pre-eclampsia, or other circulatory disorders. Do not over-tighten cuff.

First-Time Setup

Prepare monitor for first use.

1. Insert batteries: Open battery compartment, insert 4 AA batteries (not included) or connect AC adapter.
2. Set date and time: Press SET button, use UP/DOWN to adjust, press SET to confirm.
3. Download OMRON Connect app: Available on iOS and Android from app stores.
4. Pair with smartphone: Enable Bluetooth on phone, follow app instructions to pair with monitor.
5. Apply cuff: Place cuff on bare upper arm 1-2 cm above elbow, align artery marker with brachial artery.

CAUTION! Ensure cuff is not twisted and fits snugly but comfortably.

Specifications

• Measurement Method: Oscillometric (upper arm).
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/min.
• Cuff Size: 22-42 cm (IntelliWrap).
• Memory: 200 readings (100 per user).
• Display: Dual LCD with backlight.
• Connectivity: Bluetooth Low Energy (BLE).
• Power Source: 4 AA batteries or AC adapter (included).
• Operating Conditions: 10°C to 40°C, 15% to 85% humidity.
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading.
• Weight: Approx. 1.1 lb (500 g) without batteries.

Controls and Display

Front Panel: START/STOP button, SET button, UP/DOWN buttons, Memory button.

Display Icons: User 1/2, Bluetooth, Irregular Heartbeat, Hypertension Indicator, Battery, Date/Time, Memory Full, Morning Hypertension.

Settings Menu: Accessed via SET button for date/time, user selection, memory clear, Bluetooth on/off.

Taking a Measurement

For accurate readings, rest for 5 minutes before measuring.

1. Sit comfortably with feet flat on floor, back supported.
2. Wrap cuff on left upper arm (or as directed by physician).
3. Position cuff at heart level, rest arm on table.
4. Press START/STOP button. Cuff inflates automatically.
5. Remain still and quiet during measurement.
6. Reading displays systolic, diastolic, and pulse.
7. Results are automatically stored for current user.
8. To turn off, press START/STOP again or unit powers off after 1 minute.

Tip: Take measurements at the same time each day for consistent tracking.

Using the OMRON Connect App

App provides tracking, trends, and sharing with healthcare providers.

1. Enable Bluetooth on monitor (SET menu) and smartphone.
2. Open OMRON Connect app, follow pairing instructions.
3. After measurement, data syncs automatically to app.
4. View trends, morning hypertension comparisons, and history graphs.
5. Export data via email or PDF report.

Note: App requires iOS 10.0 or later, Android 5.0 or later.

Memory and Data Review

Review stored readings on device or via app.

1. Select user: Press SET to choose User 1 or User 2.
2. View memory: Press Memory button to scroll through stored readings.
3. Clear memory: In SET menu, select "Clear Memory" for current user.
4. Morning Hypertension: Monitor compares average of last 7 morning readings vs. evening.

WARNING! Clearing memory is permanent; sync to app first if needed.

Care & Maintenance

Unplug adapter/remove batteries before cleaning. Use soft, dry cloth only.

1. Cuff: Wipe with damp cloth, air dry. Do not machine wash or iron.
2. Monitor: Avoid water, chemicals, and extreme temperatures.
3. Storage: Keep in cool, dry place away from direct sunlight.
4. Batteries: Replace when low battery icon appears. Remove if not used for extended period.

CAUTION! Do not disassemble or attempt repairs. No liquids on monitor.

Regulatory Information

FDA Cleared: KXXXXXX. FCC Part 15: Class B digital device; complies with interference limits. CE Marked. Manufacturer: OMRON Healthcare, Inc. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Reset: Remove batteries/adapter for 5 minutes, then reinsert.

Service: 1-800-634-4350; www.omronhealthcare.com