Omron Blood Pressure Monitor BP786CAN Manual

The Omron BP786CAN is an advanced upper arm blood pressure monitor with IntelliSense technology, irregular heartbeat detection, hypertension indicator, 200-user memory with date and time stamp, morning hypertension indicator, body movement detection, and wireless Bluetooth connectivity to the Omron Connect app. It features a wide-range D-Ring cuff (22-42 cm), a large backlit display, and is clinically validated for accuracy. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with display, Wide-range D-Ring Cuff (22-42 cm), AC Adapter, Instruction Manual, Quick Start Guide, Storage Case.

Safety Information

Read all instructions before use. For accurate readings and safe operation.

1. Intended Use: For self-measurement of blood pressure and pulse rate at home by adults.
2. Consult your physician before use if you have arrhythmia, pre-eclampsia, or other circulatory disorders.
3. Do not use on infants, children, or persons unable to express their own will.
4. Do not use while connected to other medical electronic devices (e.g., ECG).
5. Do not modify the device.

WARNING! This device is not a substitute for professional medical diagnosis and treatment. Always consult your physician for interpretation of readings.

Package Contents

• Omron BP786CAN Blood Pressure Monitor (Main Unit)
• Wide-range D-Ring Cuff (22-42 cm)
• AC Adapter
• Instruction Manual
• Quick Start Guide
• Storage Case
• 4 x AA batteries (for initial use, check for inclusion)

CAUTION! Inspect all contents upon unboxing. Do not use if any part appears damaged.

Device Overview

Front Panel: START/STOP button, Memory button, User button (1/2), Bluetooth button, Display.

Display Symbols: Systolic/Diastolic Pressure, Pulse Rate, Irregular Heartbeat symbol, Hypertension Indicator, Body Movement symbol, User Icon, Memory Full icon, Bluetooth icon, Battery icon, Date/Time.

Connections: Cuff tube port, AC adapter port (DC 6V).

Initial Setup

Before first use: Install batteries or connect AC adapter, set date/time, apply cuff properly.

1. Power: Insert 4 AA batteries or plug in AC adapter.
2. Set Date/Time: Press and hold the MEMORY button for 3 seconds. Use START/STOP to adjust values.
3. Cuff Application: Place cuff on bare upper arm. The tube should run down the center of your arm. Secure with the D-Ring.
4. Positioning: Sit comfortably with feet flat, back supported, and cuff at heart level.

Tip: Rest for 5 minutes before measuring. Avoid eating, smoking, or exercising 30 minutes prior.

Taking a Measurement

Follow these steps for an accurate reading.

1. Sit correctly as described in Initial Setup.
2. Wrap the cuff snugly around your upper arm (1-2 cm above elbow).
3. Press the START/STOP button. The cuff will inflate automatically.
4. Remain still and quiet until measurement is complete and cuff deflates.
5. Your systolic, diastolic, and pulse readings will display.
6. To turn off the unit, press START/STOP again, or it will power off automatically after 1 minute.

WARNING! Do not inflate the cuff when it is not wrapped around your arm. Do not over-tighten the cuff.

Understanding Results

The display shows systolic pressure (top number), diastolic pressure (middle number), and pulse rate.

Refer to the classification chart in the manual for blood pressure categories.

Memory & Data Management

Stores 100 readings per user for 2 users (200 total).

1. Select User: Press USER button to toggle between User 1 and User 2 icons.
2. View Memory: Press MEMORY button to scroll through stored readings for the selected user. The average of the last 3 readings taken in the last 10 minutes is also displayed.
3. Clear Memory: To delete all memory for the current user, press and hold the MEMORY button while in memory mode until "CLr" appears.

Bluetooth Connectivity

Sync data wirelessly to the Omron Connect app for tracking and sharing with your doctor.

1. Download the free "Omron Connect" app from the Apple App Store or Google Play Store.
2. Enable Bluetooth on your smartphone/tablet.
3. On the monitor, press the Bluetooth button. The Bluetooth icon will flash.
4. Open the Omron Connect app and follow the on-screen instructions to pair the device.
5. After taking a measurement, data will automatically transfer to the app when the monitor is near your device.

Note: The monitor stores readings internally regardless of Bluetooth connection.

Care & Maintenance

Unplug AC adapter and remove batteries before cleaning.

1. Casing: Wipe with a soft, dry cloth. Do not use alcohol, benzene, or abrasive cleaners.
2. Cuff: Can be cleaned with a mild detergent and damp cloth. Air dry completely before storage. Do not machine wash, iron, or dry clean.
3. Storage: Store in the provided case in a cool, dry place away from direct sunlight, extreme temperatures, dust, and moisture.
4. Batteries: Replace all 4 batteries when the low battery icon appears. Use alkaline batteries. Remove batteries if the device will not be used for 3 months or longer.

CAUTION! Never immerse the main unit, cuff, or AC adapter in water or other liquids.

Troubleshooting

Reset: Remove batteries and AC adapter for 1 minute to perform a soft reset.

Specifications & Warranty

• Measurement Method: Oscillometric
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/min
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
• Cuff Size: 22-42 cm (arm circumference)
• Power Supply: 4 x AA batteries (1.5V) or AC adapter (DC 6V, 1A)
• Memory: 200 readings (100 per user x 2 users)
• Bluetooth: Version 4.0
• Warranty: 5-year limited warranty on the monitor. See warranty card for details.
• Clinical Validation: Validated per ANSI/AAMI/ISO 81060-2:2013

For support, visit www.omronhealthcare.com or call 1-800-634-4350.