Omron Blood Pressure Monitor BP785 Manual

The Omron BP785 is an advanced upper arm blood pressure monitor featuring IntelliSense technology for accurate, comfortable readings. It includes a wide-range D-Ring cuff (22-42 cm), dual LCD displays for systolic/diastolic pressure and pulse readings, hypertension indicator, morning hypertension detection, memory for 200 readings (with date/time stamp), irregular heartbeat detection, body movement detection, and AC adapter compatibility. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with dual LCD displays, D-Ring cuff (22-42 cm), AC adapter, storage case, instruction manual.

Safety Precautions

Read all instructions before use. For accurate measurements and safe operation.

1. Do not use on infants, young children, or persons unable to express themselves.
2. Do not use during dialysis or if you have pre-eclampsia (consult physician).
3. Do not take measurements on an arm with an intravenous drip or shunt.
4. Wait at least 30 minutes after eating, bathing, exercising, or smoking.
5. Remain still and do not talk during measurement.

WARNING! This device is not a substitute for professional medical diagnosis. Consult your physician for interpretation of readings.

Parts Identification

Familiarize yourself with the monitor components.

1. Main Unit: Contains display, START/STOP button, memory buttons.
2. D-Ring Cuff: Wide-range cuff with metal ring for easy application.
3. Air Tube: Connects cuff to main unit.
4. AC Adapter Jack: For connecting AC adapter (optional).
5. Battery Compartment: Holds 4 AA batteries.
6. Display: Dual LCD screens showing measurement results.

CAUTION! Do not bend or twist the air tube excessively.

Initial Setup

Prepare the monitor for first use.

1. Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
2. Connect AC adapter (optional): Plug adapter into monitor and wall outlet.
3. Set date and time: Press and hold CLOCK SET button, use MEMORY buttons to adjust.
4. Apply cuff: Wrap cuff directly on bare upper arm, 1-2 cm above elbow.
5. Position arm: Rest arm on table with cuff at heart level.

Tip: For most accurate readings, take measurements at the same time each day.

Taking a Measurement

Follow these steps for accurate blood pressure measurement.

1. Sit comfortably with feet flat on floor, back supported.
2. Apply cuff to left upper arm (unless instructed otherwise by physician).
3. Position cuff so air tube runs down center of arm toward palm.
4. Press START/STOP button to begin inflation.
5. Remain still and quiet during measurement.
6. Read results on display when measurement completes.
7. Press START/STOP button to turn off monitor.

WARNING! Do not inflate cuff when not wrapped around arm.

Understanding the Display

The dual LCD displays show various icons and readings.

Main Display (Left): Shows systolic pressure, diastolic pressure, pulse rate, date/time.

Secondary Display (Right): Shows memory number, user indicator (1 or 2), morning hypertension indicator, irregular heartbeat symbol, body movement symbol, cuff fit indicator, battery level, average reading.

Hypertension Indicator: Green (normal), Yellow (pre-hypertension), Red (hypertension) based on WHO classification.

Memory Function

The monitor stores 200 total readings (100 per user).

1. Select user: Press USER button to toggle between User 1 and User 2.
2. View memory: Press MEMORY button to scroll through stored readings.
3. Delete memory: Press and hold MEMORY button for 3 seconds to clear current user's memory.
4. Average reading: Automatically calculates average of last 3 readings taken within 10 minutes.

Note: Memory includes date, time, systolic/diastolic pressure, pulse rate, and any detection symbols.

Advanced Features

Utilize the monitor's advanced detection capabilities.

• Irregular Heartbeat Detection: Symbol appears if irregular heartbeat is detected during measurement.
• Body Movement Detection: Symbol appears if excessive movement is detected; measurement may need to be retaken.
• Morning Hypertension Detection: Morning symbol appears for readings taken between 6:00 AM and 10:00 AM.
• Cuff Fit Indicator: Appears if cuff is not wrapped properly.
• Automatic Power Off: Monitor turns off automatically after 1 minute of inactivity.

Care & Maintenance

Proper care ensures accurate measurements and long device life.

1. Clean cuff with mild soap and damp cloth only; do not machine wash.
2. Wipe main unit with dry, soft cloth.
3. Store in provided case when not in use.
4. Remove batteries if monitor will not be used for 3 months or more.
5. Avoid extreme temperatures, humidity, dust, and direct sunlight.

CAUTION! Do not immerse any part of the monitor in water. Do not use alcohol or abrasive cleaners.

Specifications

• Measurement Method: Oscillometric
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/minute
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
• Memory: 200 readings (100 per user) with date/time
• Cuff Size: 22-42 cm (8.7-16.5 inches) circumference
• Power Supply: 4 AA batteries or AC adapter (included)
• Battery Life: Approximately 500 measurements (alkaline batteries)
• Dimensions: Main unit: 135mm(W) × 122mm(H) × 71mm(D)
• Weight: Approximately 340g (without batteries)
• Operating Conditions: Temperature: 10°C to 40°C, Humidity: 30% to 85% RH

Troubleshooting

Reset: Remove batteries for 5 minutes to reset all settings.

Service: For service, contact Omron Healthcare at 1-800-634-4350 or visit www.omronhealthcare.com