Omron Blood Pressure Monitor BP762 Manual

The Omron BP762 is an upper arm blood pressure monitor featuring IntelliSense technology for accurate, comfortable readings, a wide-range D-Ring cuff (22-42 cm), dual display for systolic/diastolic pressure and pulse, hypertension indicator, irregular heartbeat detection, memory storage for multiple users, date/time stamp, AC adapter compatibility, and averaging of last three readings. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with dual LCD display, D-Ring cuff with air tube, AC adapter, storage case, instruction manual.

Safety Precautions

Read all instructions before use. Not for medical diagnosis; consult healthcare professional.

1. Do not use on infants, children, or persons unable to express themselves.
2. Do not use during or immediately after physical exercise or bathing.
3. Do not wrap cuff over clothing or apply to injured arm.
4. Keep device away from electromagnetic fields (microwaves, mobile phones).
5. Do not disassemble or modify the device.

WARNING! This device is not a substitute for professional medical advice. Seek medical attention for abnormal readings.

Parts Identification

Front Panel: LCD display, START/STOP button, MEMORY button, USER button (1/2), TIME SET button.

Display Symbols: Systolic pressure, Diastolic pressure, Pulse rate, Hypertension indicator, Irregular heartbeat symbol, User indicator, Memory full indicator, Low battery indicator, Date/Time display.

Cuff Components: D-Ring for easy application, Air tube connector, Velcro closure, Artery marker (align with brachial artery).

Initial Setup

Prepare device for first use.

1. Install batteries: Open battery compartment, insert 4 AA batteries observing polarity.
2. Set date and time: Press TIME SET button, use START/STOP to adjust values, press TIME SET to confirm.
3. Connect cuff: Insert air tube connector into port on left side of unit until it clicks.
4. Test operation: Without wearing cuff, press START/STOP to ensure device powers on.

CAUTION! Use only recommended batteries. Remove batteries if not using for extended period.

Taking a Measurement

For accurate readings, follow proper procedure.

1. Prepare: Rest for 5 minutes before measurement. Avoid caffeine, smoking, or exercise 30 minutes prior.
2. Apply cuff: Sit with feet flat, back supported. Wrap cuff on bare upper arm 1-2 cm above elbow. Align artery marker with brachial artery. Secure with Velcro.
3. Position arm: Rest arm on table with cuff at heart level. Palm up, relaxed.
4. Start measurement: Press START/STOP button. Cuff will inflate automatically.
5. Remain still: Do not talk or move during measurement.
6. Read results: Display shows systolic/diastolic pressure and pulse. Hypertension or irregular heartbeat symbols if detected.
7. Deflation: Cuff deflates automatically. Device stores reading automatically.

Tip: Take measurements at same time each day for consistent tracking.

Memory Function

Device stores readings for two users (User 1 and User 2).

1. Select user: Before measurement, press USER button to select User 1 or User 2.
2. View memory: Press MEMORY button to scroll through stored readings. Display shows reading number, systolic/diastolic, pulse, date/time.
3. Average function: After three readings, device automatically calculates and displays average when MEMORY is pressed.
4. Clear memory: To delete all readings for current user, press and hold MEMORY for 3 seconds until display clears.

Note: Memory is maintained when batteries are replaced if done within 3 minutes.

Understanding Results

Reference for interpreting readings (based on American Heart Association guidelines).

Symbols: Hypertension indicator appears if systolic ≥135 or diastolic ≥85. Irregular heartbeat symbol appears if irregular rhythm detected during measurement.

Important: These are general guidelines. Consult your physician for personal target ranges.

Care & Maintenance

Proper care ensures accuracy and longevity.

1. Cleaning: Wipe unit with soft, dry cloth. Do not use alcohol, benzene, or abrasive cleaners.
2. Cuff care: Hand wash cuff in mild soapy water, rinse thoroughly, air dry completely before use.
3. Storage: Store in provided case in cool, dry place away from direct sunlight.
4. Battery replacement: Replace when low battery symbol appears. Use fresh alkaline batteries.
5. AC adapter: Use only Omron-approved AC adapter (model EA-AC85).

CAUTION! Do not immerse unit in water. Do not wash cuff in washing machine or dryer.

Specifications

• Measurement Method: Oscillometric
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/minute
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
• Cuff Size: 22-42 cm (D-Ring)
• Memory: 100 readings total (50 per user)
• Power Source: 4 AA batteries or AC adapter (included)
• Battery Life: Approximately 300 measurements (alkaline batteries)
• Dimensions: Main unit: 123mm (W) × 85mm (H) × 141mm (D)
• Weight: Approximately 340g (without batteries)
• Operating Conditions: Temperature: 10°C to 40°C, Humidity: 30% to 85% RH

Troubleshooting

Reset: Remove batteries for 3 minutes, then reinsert to reset device.

Warranty & Support

Omron Healthcare, Inc. provides limited 5-year warranty from date of purchase. Warranty covers defects in materials/workmanship under normal use. Not covered: Damage from misuse, accidents, unauthorized repairs, or normal wear.

Customer Support: 1-800-634-4350 (US), Monday-Friday 8:30 AM-5:00 PM CST

Website: www.omronhealthcare.com

Service: For repairs, contact customer service for return authorization.

Note: Keep original receipt as proof of purchase date.