Omron Blood Pressure Monitor BP710N Manual

The Omron BP710N is an automatic upper arm blood pressure monitor with IntelliSense technology for accurate and comfortable readings. It features a wide-range D-Ring cuff, hypertension indicator, irregular heartbeat detection, 60-memory storage with date and time stamp, body movement detection, and an easy-to-read backlit display. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Safety Information 4. Device Overview 5. Initial Setup 6. Taking a Measurement 7. Understanding the Display 8. Memory Function 9. Care & Maintenance 10. Troubleshooting 11. Specifications & Warranty

Features at a Glance

Key components: Main unit, Wide-range D-Ring Cuff (22-42 cm), AC Adapter, Instruction Manual, Storage Case.

Feature	Description
IntelliSense Technology	Automatically inflates to the optimal level for comfortable measurement
Hypertension Indicator	Displays a warning symbol if systolic/diastolic readings are high
Irregular Heartbeat Detection	Detects and displays an icon if an irregular rhythm is found during measurement
60-Memory Storage	Stores up to 60 readings with date and time stamp
Body Movement Detection	Alerts if excessive movement is detected during measurement
Backlit Display	Easy-to-read LCD screen with illumination
D-Ring Cuff	Pre-formed cuff for easy self-application (22-42 cm arm circumference)
Date & Time Clock	Built-in clock for accurate time-stamping of readings
AC/DC Operation	Powered by 4 AA batteries or included AC adapter
Average Reading	Calculates the average of the last 3 readings taken within 10 minutes

Package Contents

Unpack and verify all items are present.

Omron BP710N Blood Pressure Monitor (Main Unit)
Wide-range D-Ring Cuff (22-42 cm)
AC Adapter
Instruction Manual (this document)
Storage Case
Quick Start Guide

NOTE: If any item is missing or damaged, contact customer service.

Safety Information

Read all instructions before use.

Do not use on infants, children, or persons who cannot express themselves.
Do not use during or immediately after physical exercise or bathing.
Do not use on an arm with an intravenous drip or surgical wound.
Consult your physician before use if you have arrhythmia, blood flow problems, or other circulatory disorders.
Use only the provided AC adapter. Use of other adapters may cause malfunction or damage.

WARNING! This device is for home use only, not for professional medical diagnosis. Always follow your doctor's instructions regarding blood pressure monitoring.

Device Overview

Front Panel: START/STOP button, Memory button, Power button, Backlight button.
Display: Shows systolic/diastolic pressure, pulse rate, date, time, and icons for various indicators.
Cuff Connector: Port for attaching the air tube from the cuff.
AC Adapter Jack: For connecting the AC adapter (located on the side).
Battery Compartment: Holds 4 AA batteries (located on the bottom).

Display Icons: Hypertension, Irregular Heartbeat, Body Movement, Memory, Average, Battery, AC Power.

Initial Setup

Prepare the device for first use.

Insert Batteries: Open battery compartment on bottom, insert 4 AA batteries observing polarity.
Set Date & Time: Press and hold the MEMORY button for 3 seconds. Use START/STOP to adjust values, MEMORY to confirm and move to next setting.
Connect Cuff: Plug the cuff tube firmly into the cuff connector on the left side of the unit.
AC Adapter (Optional): Plug the adapter into the AC jack and then into a wall outlet. The device will prioritize AC power when connected.

CAUTION! Do not use rechargeable batteries. Remove batteries if the device will not be used for 3 months or more.

Taking a Measurement

For the most accurate reading, follow these steps carefully.

Prepare: Avoid eating, smoking, exercising, or bathing for 30 minutes prior. Sit quietly for 5 minutes.
Position: Sit on a chair with feet flat on the floor. Rest your arm on a table so the cuff is at heart level.
Apply Cuff: Wrap the cuff around your bare upper arm 1-2 cm above the elbow. The tube should run down the center of your arm. Secure with the cloth closure.
Start Measurement: Press the START/STOP button. The cuff will inflate automatically. Remain still and quiet until measurement is complete.
Read Results: Your systolic/diastolic pressure and pulse rate will display. The reading is automatically stored in memory.
Power Off: The unit turns off automatically about 1 minute after the reading is displayed.

Tip: Take measurements at the same time each day for consistent tracking.

Understanding the Display

After a measurement, the display shows:

Symbol/Value	Meaning
Upper Number (e.g., 120)	Systolic Pressure (mmHg)
Lower Number (e.g., 80)	Diastolic Pressure (mmHg)
Heart Icon with Number (e.g., 72)	Pulse Rate (beats per minute)
Flashing Heart Icon	Irregular Heartbeat detected
Exclamation Mark (!) in Circle	Hypertension Indicator (reading exceeds 135/85 mmHg)
Person Moving Icon	Body Movement detected during measurement
Letter 'M'	Memory recall mode is active
AVG	Average reading is displayed
Battery Icon	Battery level indicator
Plug Icon	AC Adapter is connected

Memory Function

The device stores the last 60 readings with date and time.

View Memory: Press the MEMORY button once. The most recent reading displays. Press MEMORY repeatedly to scroll through older readings.
View Average: While in memory mode, press and hold the MEMORY button for 3 seconds to display the average of the last 3 readings taken within 10 minutes.
Clear All Memory: With the unit OFF, press and hold both the MEMORY and START/STOP buttons simultaneously for 3 seconds. 'CLr' will flash on the display. Press START/STOP to confirm.

Note: Memory is retained even when batteries are removed or replaced.

Care & Maintenance

Proper care ensures long life and accurate readings.

Cleaning: Wipe the main unit and cuff with a soft, dry cloth. Do not use solvents, abrasives, or immerse in water.
Storage: Disconnect the cuff tube and store the device in the provided case in a cool, dry place away from direct sunlight and extreme temperatures.
Cuff Care: Do not fold the cuff tightly or twist the air tube excessively. Do not wash the cuff.
Batteries: Replace batteries when the low battery icon appears. Use 4 new AA alkaline batteries.

CAUTION! Do not disassemble or attempt to repair the unit. There are no user-serviceable parts inside.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Display is blank	Dead batteries / No power	Insert new batteries or connect AC adapter. Ensure batteries are inserted correctly.
Error Code 'E' appears	Cuff not attached / Air leak	Ensure cuff tube is connected securely. Check cuff for holes or cracks.
Error Code 'Er1' or 'Er2'	Measurement error	Movement during measurement. Remain still and retry. Ensure cuff is at heart level.
Irregular Heartbeat symbol flashes	Irregular rhythm detected	The reading may be less accurate. Take another measurement. If symbol appears frequently, consult your physician.
Reading seems too high/low	Incorrect posture or cuff placement	Ensure you are seated correctly, arm supported at heart level, and cuff is snug but not too tight. Wait 5 minutes and retry.
Memory does not recall	Memory is empty or cleared	Take a new measurement to store a reading. Check if memory was accidentally cleared.

Reset: Remove batteries and AC adapter for 1 minute, then reinstall to perform a soft reset.

Specifications & Warranty

Measurement Method: Oscillometric
Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/min
Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
Cuff Size: 22-42 cm (arm circumference)
Power Supply: 4 x 1.5V AA batteries or DC 6V (via AC adapter)
Memory: 60 readings with date and time
Auto Shut-off: Approximately 1 minute after measurement
Operating Conditions: 10°C to 40°C, 30% to 85% RH
Warranty: 5-year limited warranty from date of purchase.

For technical support, warranty service, or to download this manual:
Visit: www.omronhealthcare.com
Call: 1-800-634-4350