Omron Blood Pressure Monitor BP6100 Manual

The Omron BP6100 is an upper-arm blood pressure monitor featuring IntelliSense technology for accurate and comfortable readings, a large backlit display, memory storage for multiple users, irregular heartbeat detection, hypertension indicator, body movement detection, and a cuff wrap guide. It is designed for home use and provides reliable blood pressure and pulse measurements. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with backlit display, Arm cuff with D-Ring, AC adapter, Instruction manual, Storage case.

Safety Precautions

Read all instructions before use. For accurate measurements and safe operation.

1. Do not use on infants, young children, or persons unable to express themselves.
2. Do not use while operating a vehicle or machinery.
3. Consult your physician before use if you have arrhythmia, blood circulation problems, or other conditions.
4. Do not inflate the cuff when not wrapped around the arm.
5. Keep the device away from children and pets.

WARNING! This device is not a substitute for professional medical diagnosis. Consult your doctor for interpretation of readings.

First-Time Setup

Prepare the device for first use.

1. Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
2. Connect AC adapter: Plug into DC jack and wall outlet (optional, for continuous power).
3. Set date and time: Press MEMORY button, use UP/DOWN to set, press START/STOP to confirm.
4. Attach cuff: Connect cuff tube to the air connector on the left side of the unit.

CAUTION! Use only recommended batteries or the included AC adapter. Do not mix old and new batteries.

Specifications

• Measurement Method: Oscillometric method.
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/minute.
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading.
• Memory: 100 readings for 2 users (50 each) with date and time.
• Cuff Size: Fits arm circumference 22-42 cm (9-17 inches).
• Power Source: 4 AA batteries or AC adapter (DC 6V).
• Display: LCD with backlight.
• Operating Conditions: Temperature: 10°C to 40°C, Humidity: 30% to 85% RH.
• Storage Conditions: Temperature: -20°C to 60°C, Humidity: 10% to 95% RH.

Controls and Display

Front Panel: START/STOP button, MEMORY button, UP/DOWN buttons.

Display Symbols: User indicator (1/2), Memory full icon, Battery indicator, Irregular heartbeat symbol, Hypertension indicator, Body movement detection icon, Cuff wrap guide, Systolic/Diastolic pressure, Pulse rate, Date and time.

Settings: Press MEMORY to enter setup mode for date/time, user selection, memory review, and unit reset.

Taking a Measurement

For accurate results, rest for 5 minutes before measuring.

1. Sit comfortably: Keep feet flat on floor, back straight, arm supported at heart level.
2. Wrap cuff: Place cuff on bare upper arm 1-2 cm above elbow, align artery marker with brachial artery.
3. Secure cuff: Tighten so one finger fits between cuff and arm.
4. Start measurement: Press START/STOP. Cuff inflates automatically.
5. Remain still: Do not talk or move during measurement.
6. Read results: Systolic, diastolic, and pulse appear on display.
7. Power off: Device turns off automatically after 1 minute.

Tip: Take measurements at the same time each day for consistent tracking.

Memory Function

Stores up to 100 readings with date and time for two users.

1. Select user: Press MEMORY, then UP/DOWN to choose User 1 or User 2.
2. View memory: Press MEMORY twice to scroll through stored readings.
3. Clear memory: In memory mode, hold DOWN button for 3 seconds to clear current user's memory.
4. Average reading: Display shows average of last 3 readings for current user.

Note: Memory is retained when batteries are removed.

Understanding Readings

Interpretation guide based on American Heart Association categories.

Symbols: Hypertension indicator appears if systolic ≥135 or diastolic ≥85. Irregular heartbeat symbol appears if detected. Body movement icon appears if excessive motion is detected.

Care & Maintenance

Proper care ensures accuracy and longevity.

1. Clean with soft, dry cloth. Do not use alcohol, benzene, or abrasive cleaners.
2. Store in provided case in a cool, dry place away from direct sunlight.
3. Remove batteries if not using for extended periods.
4. Do not disassemble or attempt repairs.
5. Replace cuff if damaged or showing signs of wear.

CAUTION! Do not immerse in water or other liquids. Avoid extreme temperatures and humidity.

Regulatory Information

FDA Cleared: For over-the-counter home use. CE Marked: Complies with European Medical Device Directive. Manufactured by Omron Healthcare Co., Ltd. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Reset: Remove batteries and AC adapter for 1 minute, then reinsert.

Service: 1-800-634-4350; www.omronhealthcare.com