Omron Blood Pressure Monitor 5250 Manual

The Omron Blood Pressure Monitor 5250 is a clinically validated, automatic upper-arm blood pressure monitor with IntelliSense technology for accurate and comfortable measurements. It features a large, easy-to-read display, hypertension indicator, irregular heartbeat detector, memory storage for multiple users, and a compact design for home use. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with display, Arm cuff, AC adapter, Instruction manual, Storage case.

Safety Precautions

Read all instructions before use. Consult your physician for proper monitoring.

1. Do not use on infants, small children, or persons who cannot express themselves.
2. Do not use while operating a vehicle or machinery.
3. Do not use in areas with high humidity or where flammable gases are present.
4. Do not disassemble or modify the device.
5. Keep batteries away from children and pets.

WARNING! This device is for home use only, not for professional medical diagnosis. Always follow your doctor's instructions regarding blood pressure monitoring.

Setup and Preparation

Prepare the monitor for first use.

1. Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
2. Connect AC adapter: Plug into DC jack and wall outlet (optional).
3. Set date and time: Press and hold CLOCK button, use MEMORY button to adjust.
4. Apply cuff: Wrap cuff on bare upper arm, 1-2 cm above elbow. Ensure air tube aligns with artery.
5. Rest quietly: Sit comfortably with feet flat, back supported, and arm at heart level.

CAUTION! Ensure cuff is properly positioned. Incorrect placement may result in inaccurate readings.

Specifications

• Measurement Method: Oscillometric method.
• Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/minute.
• Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading.
• Memory: 100 readings per user (2 users).
• Display: LCD with backlight.
• Cuff Size: Fits arm circumference 22-42 cm (9-17 inches).
• Power Source: 4 AA batteries or AC adapter (6V DC, 600mA).
• Operating Conditions: Temperature: 10°C to 40°C, Humidity: 30% to 85% RH.
• Dimensions: Main unit: 128mm (W) x 98mm (H) x 141mm (D).
• Weight: Approximately 400g (without batteries).

Controls and Display

Front Panel: START/STOP button, MEMORY button, CLOCK button, USER button.

Display Symbols: User indicator (1/2), Memory full, Battery low, Irregular heartbeat, Hypertension, WHO indicator, Average, Date/Time, Systolic/Diastolic/Pulse readings.

Settings: Press and hold CLOCK to set date/time. Press USER to switch between users. Press MEMORY to review stored readings.

Taking a Measurement

Follow these steps for accurate readings.

1. Sit quietly for 5 minutes before measuring.
2. Wrap cuff properly on left arm (unless instructed otherwise by physician).
3. Press START/STOP button. Cuff will inflate automatically.
4. Remain still and quiet during measurement.
5. Reading displays when complete. Cuff deflates automatically.
6. Record reading if desired. Device stores automatically.
7. Wait at least 3 minutes before taking another reading.

Tip: Take measurements at the same time each day for consistent tracking.

Memory Function

Stores up to 100 readings per user.

1. Select user: Press USER button to choose User 1 or User 2.
2. View memory: Press MEMORY button to scroll through stored readings.
3. View average: Press and hold MEMORY to see average of last 3 readings.
4. Clear memory: While in memory mode, press and hold START/STOP for 3 seconds.

Note: Memory is maintained when batteries are replaced if done within 3 minutes.

Understanding Results

Interpret your blood pressure readings.

Irregular Heartbeat Symbol: Appears if irregular rhythm detected during measurement. Consult physician if frequent.

Hypertension Symbol: Appears if systolic ≥135 or diastolic ≥85.

Care & Maintenance

Proper care ensures accurate measurements and long device life.

1. Clean cuff with mild soap and damp cloth. Do not machine wash.
2. Wipe main unit with dry, soft cloth. Do not use solvents.
3. Store in cool, dry place away from direct sunlight.
4. Remove batteries if not using for extended period.
5. Replace batteries when low battery symbol appears.

CAUTION! Do not immerse in water. Do not expose to extreme temperatures or humidity.

Regulatory Information

FDA Cleared: K number [Insert K number if available]. CE Marked: Meets European Medical Device Directive requirements. Manufactured by Omron Healthcare Co., Ltd., Japan. Distributed by Omron Healthcare, Inc. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Compliance: This device complies with Part 15 of FCC Rules. Operation is subject to conditions: (1) device must not cause harmful interference, (2) device must accept any interference received.

Troubleshooting

Reset: Remove batteries for 3 minutes, then reinsert to reset device.

Service: 1-800-634-4350; www.omronhealthcare.com