Omron Blood Pressure Meter Manual

The Omron Blood Pressure Meter is a digital device for measuring systolic and diastolic blood pressure and pulse rate. It features an easy-to-read LCD display, one-touch operation, automatic inflation and deflation, irregular heartbeat detection, memory storage for multiple readings, WHO blood pressure classification indicator, and a comfortable cuff. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with LCD display, Arm Cuff, AC Adapter port, Memory button, START/STOP button, Battery compartment.

Safety Precautions

Read all instructions before use. Consult physician for interpretation of readings.

1. Do not use on infants, children, or persons unable to express themselves.
2. Do not use during physical exercise or immediately after.
3. Do not wrap cuff over clothing; apply directly to bare upper arm.
4. Do not use if device or cuff is damaged.
5. Keep device away from extreme temperatures, humidity, dust, and direct sunlight.

WARNING! This device is for home use only, not for clinical diagnosis. Measurements may be affected by movement, talking, or irregular heart rhythm.

Parts Identification

Front: LCD display, START/STOP button. Side: Memory button, AC adapter port. Bottom: Battery compartment. Cuff: Air tube connector, D-ring, artery marker.

LCD Symbols: Systolic/Diastolic values, Pulse rate, Memory indicator, User indicator (1/2), Irregular heartbeat symbol, WHO bar graph, Low battery, Error codes.

CAUTION! Ensure cuff is correctly positioned with artery marker aligned with brachial artery.

Specifications

• Measurement Method: Oscillometric.
• Measurement Range: Pressure: 0-299 mmHg; Pulse: 40-180 beats/min.
• Accuracy: Pressure: ±3 mmHg; Pulse: ±5% of reading.
• Memory Capacity: Varies by model (e.g., 60 readings per user x 2 users).
• Cuff Size: Standard adult cuff (22-32 cm circumference).
• Power Source: 4 x AA batteries or AC adapter (optional).
• Operating Conditions: 10°C to 40°C, 15% to 85% humidity.
• Storage Conditions: -20°C to 60°C, 10% to 95% humidity.
• Weight: Approx. 300g (without batteries).

Initial Setup

Insert batteries or connect AC adapter. Set date and time.

1. Open battery compartment: Insert 4 AA batteries observing polarity.
2. Set date/time: Press and hold Memory button until year flashes; use START/STOP to adjust.
3. Apply cuff: Sit quietly for 5 minutes before first measurement.
4. Select user: Press Memory button to toggle between User 1 and User 2.

Tip: For most accurate readings, measure at same time each day under consistent conditions.

Taking a Measurement

Sit correctly with feet flat, back supported, and arm at heart level.

1. Wrap cuff: Place cuff on bare upper arm 1-2 cm above elbow with tube facing down.
2. Position: Rest arm on table with palm up; ensure cuff is snug but not tight.
3. Start: Press START/STOP button; device will inflate automatically.
4. Remain still: Do not move or talk during measurement.
5. Read results: Systolic, diastolic, and pulse display when measurement complete.
6. Deflation: Cuff deflates automatically; device stores reading in memory.

WARNING! Do not inflate cuff when not wrapped on arm. Wait 2-3 minutes between measurements.

Memory Function

View stored readings by user with average of last 3 readings.

1. Recall memory: Press Memory button to display last reading for current user.
2. Scroll: Press again to view previous readings with date/time stamp.
3. Clear memory: Press and hold Memory button for 5 seconds while in memory mode (all readings for current user deleted).
4. User selection: Short press Memory button when device is off to switch between User 1 and User 2.

Note: Memory is maintained when batteries are replaced if done within 3 minutes.

Understanding Results

WHO classification shown via color bar on display:

Irregular Heartbeat Symbol: Appears if irregular rhythm detected during measurement. Consult physician if frequent.

Care & Maintenance

Clean with soft, dry cloth. Do not immerse in water or use chemicals.

1. Cuff care: Wipe with damp cloth and mild detergent; air dry completely.
2. Storage: Keep in carrying case; avoid bending air tube.
3. Batteries: Replace when low battery icon appears. Remove if not used for extended period.
4. Accuracy check: Have device checked annually by authorized service center.

CAUTION! Do not disassemble device. No user-serviceable parts inside.

Regulatory Information

FDA Cleared: For over-the-counter home use. CE Marked: Complies with European Medical Device Directive. Manufactured by Omron Healthcare Co., Ltd. Copyright © Omron Healthcare. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Reset: Remove batteries, wait 5 minutes, reinsert to reset microprocessor.

Service: 1-800-634-4350; www.omronhealthcare.com