Omron 7 Wrist Blood Pressure Monitor Manual

The Omron 7 Wrist Blood Pressure Monitor is a clinically validated, automatic device for measuring blood pressure and pulse rate at the wrist. It features IntelliSense technology for comfortable inflation, a large LCD display with backlight, hypertension indicator, irregular heartbeat detector, memory storage for multiple users, date/time stamp, and body movement detection. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Precautions 3. Device Components 4. Specifications 5. Before First Use 6. Taking a Measurement 7. Understanding the Display 8. Memory Recall Function 9. Care & Maintenance 10. Battery Replacement 11. Troubleshooting

Features at a Glance

Key components: Main unit with LCD display, Wrist Cuff, Storage Case, Instruction Manual, 2 AAA batteries.

Feature	Description
IntelliSense Technology	Automatically inflates to the optimal level for comfortable measurement
Hypertension Indicator	Displays warning symbol if systolic/diastolic readings are high
Irregular Heartbeat Detector	Detects and displays an icon if an irregular rhythm is detected during measurement
Body Movement Detection	Alerts user if movement is detected that could affect accuracy
Memory Storage	Stores up to 100 readings with date and time for two users (200 total)
Large LCD with Backlight	Easy-to-read display for day or night use
Average Reading	Calculates the average of the last 3 readings taken within 10 minutes
Automatic Power Off	Conserves battery life by turning off after 1 minute of inactivity
Wrist Positioning Guide	Ensures correct placement for accurate results
Clinically Validated	Meets standards of the European Society of Hypertension (ESH)

Safety Precautions

Read all instructions before use. For personal use only.

Do not use on infants, children, or persons who cannot express themselves.
Consult your physician before use if you have arrhythmia, blood circulation problems, or other serious conditions.
Do not use the monitor on a wounded wrist or arm.
Do not modify the cuff or monitor.
Keep the monitor and cuff away from children.

WARNING! This device is not a substitute for professional medical diagnosis. Always consult your physician regarding your condition.

Device Components

Identify all parts before setup.

Main Unit: Contains LCD display, START/STOP button, MEMORY button.
Wrist Cuff: With metal clasp, air tube, and positioning mark.
Storage Case: For storing the monitor and cuff.
Battery Compartment: Holds 2 AAA batteries (included).
Air Plug: Connects the cuff tube to the main unit.

CAUTION! Do not bend or twist the air tube excessively.

Specifications

Measurement Method: Oscillometric (wrist).
Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/min.
Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading.
Memory: 100 readings x 2 users (200 total) with date/time.
Inflation: Automatic via IntelliSense.
Cuff Size: Fits wrist circumference 13.5-21.5 cm (5.3"-8.5").
Power Source: 2 AAA batteries (DC 3V).
Battery Life: Approx. 300 measurements.
Operating Conditions: Temperature: 10°C - 40°C, Humidity: 30% - 85% RH.
Dimensions: Main Unit: 73(W) x 32(H) x 62(D) mm.

Before First Use

Prepare the monitor for initial measurement.

Insert Batteries: Open battery compartment, insert 2 AAA batteries observing polarity.
Set Date and Time: Press the MEMORY button for 3 seconds, use START/STOP to adjust.
Apply Cuff: Place cuff on left wrist (unless instructed otherwise by physician).
Positioning: Ensure the cuff is 1-2 cm above the wrist with the display facing up.
Rest: Sit quietly for 5 minutes before first measurement.

Tip: For most accurate results, take measurements at the same time each day.

Taking a Measurement

Follow these steps for accurate readings.

Sit comfortably with feet flat on the floor and back supported.
Place the cuff on your left wrist with palm facing up.
Position the cuff so the air tube runs along the inside of your wrist.
Fasten the cuff snugly using the metal clasp.
Rest your elbow on a table so the cuff is at heart level.
Press the START/STOP button. The monitor will inflate automatically.
Remain still and quiet until measurement is complete and results are displayed.
Press START/STOP again to turn off, or wait for auto power-off.

WARNING! Do not move or talk during measurement. Do not overtighten the cuff.

Understanding the Display

The LCD shows various icons and readings.

Symbol	Meaning
SYS / DIA	Systolic / Diastolic pressure (mmHg)
Pulse	Heart rate (beats per minute)
User 1 / User 2	Indicates which user's memory is active
Date & Time	Timestamp of measurement
Heart Icon	Irregular heartbeat detected
Movement Icon	Body movement detected during measurement
High Pressure Icon	Hypertension indicator (reading above 135/85 mmHg)
Memory Number	Current memory position (1-100)
Average Icon	Displayed when showing average of last 3 readings
Low Battery	Replace batteries soon

Memory Recall Function

Review stored measurements.

Press MEMORY button to enter memory mode.
Press START/STOP to scroll through stored readings for the current user.
Hold MEMORY for 3 seconds to switch between User 1 and User 2.
To clear all memory: In memory mode, hold START/STOP for 5 seconds until "CLr" appears.

Note: Memory is maintained even when batteries are removed.

Care & Maintenance

Proper care ensures accuracy and longevity.

Clean only with a soft, dry cloth. Do not use solvents or abrasives.
Store in the provided case in a cool, dry place away from direct sunlight.
Do not expose to extreme temperatures, humidity, dust, or strong shocks.
Do not immerse in water or other liquids.
Remove batteries if the monitor will not be used for 3 months or longer.

CAUTION! Never wash the cuff in a washing machine. Spot clean only with mild soap if necessary.

Battery Replacement

Replace batteries when low battery icon appears.

Press the battery cover latch and slide to open.
Remove old batteries observing polarity.
Insert 2 new AAA batteries with correct polarity (+/-).
Close the battery cover until it clicks.
Test the monitor with a measurement.

WARNING! Use only AAA alkaline batteries. Do not mix old and new batteries or different types.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace with new AAA batteries.
Error Code "E"	Cuff not properly attached or leak	Check cuff connection; ensure proper placement on wrist.
Inaccurate reading	Incorrect positioning or movement	Ensure cuff is at heart level; remain still during measurement.
Irregular heartbeat icon	Possible arrhythmia detected	Consult your physician if this appears frequently.
Monitor won't inflate	Blocked air tube or weak batteries	Check for kinks in tube; replace batteries.
Memory not storing	Memory full or incorrect user selected	Clear memory or switch to correct user profile.

Reset: Remove batteries for 1 minute, then reinsert to reset the device.

Service: For technical support, contact Omron Healthcare at 1-800-634-4350 or visit www.omronhealthcare.com.