Omron 7 BP652 Manual

The Omron 7 BP652 is a digital blood pressure monitor designed for upper arm measurement, featuring IntelliSense technology for accurate and comfortable readings, irregular heartbeat detection, hypertension indicator, memory storage for multiple users, and a large LCD display with backlight. It is clinically validated and intended for home use to help manage cardiovascular health. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit, Arm cuff, AC adapter, Instruction manual, Storage case.

Feature	Description
IntelliSense Technology	Automatically inflates to optimal pressure for comfortable measurement
Irregular Heartbeat Detection	Detects and displays irregular heartbeat symbol during measurement
Hypertension Indicator	Displays warning symbol if systolic/diastolic readings are high
Dual User Memory	Stores up to 100 readings per user (200 total)
Large LCD with Backlight	Easy-to-read display for day or night use
Date & Time Stamp	Records measurement date and time for tracking
Automatic Power Off	Conserves battery life by turning off after 1 minute of inactivity
World Health Organization (WHO) Indicator	Color-coded bar graph shows blood pressure classification
Cuff Fit Indicator	Ensures cuff is wrapped correctly for accurate results
AC Adapter Option	Can be powered by AC adapter (included) or 4 AA batteries

Safety Precautions

Read all instructions before use. This device is for personal home use only.

1. Do not use on infants, small children, or persons unable to express themselves.
2. Do not use during dialysis or if you have pre-eclampsia (consult your doctor).
3. Do not use on an arm with an intravenous drip or surgical wound.
4. Do not use while operating a vehicle or machinery.
5. Keep the device away from children and pets.

WARNING! This device is not a substitute for professional medical diagnosis. Consult your physician for interpretation of readings and treatment decisions.

Package Contents

Unpack the box and verify all items are present.

• Omron 7 BP652 Monitor (1 unit)
• Arm Cuff (22-42 cm circumference) (1 piece)
• AC Adapter (1 unit)
• Instruction Manual (1 copy)
• Storage Case (1 piece)
• Quick Start Guide (1 copy)
• Warranty Card (1 copy)

Note: Batteries are not included. Requires 4 AA batteries if not using AC adapter.

Device Overview

Front Panel: START/STOP button, MEMORY button, USER button (User 1/User 2), POWER button. Display: Systolic pressure, Diastolic pressure, Pulse rate, Irregular heartbeat symbol, Hypertension indicator, WHO bar graph, User icon, Date/Time, Battery icon, Cuff wrap indicator.

Cuff: Connects to left side of monitor. Marked with artery index line to ensure proper placement.

Initial Setup

Before first use, install batteries or connect AC adapter, set date/time, and select user.

1. Power: Insert 4 AA batteries or plug in AC adapter.
2. Set Date/Time: Press and hold MEMORY button for 3 seconds until year flashes. Use START/STOP to adjust values, MEMORY to confirm and move to next setting.
3. Select User: Press USER button to toggle between User 1 and User 2 icon on display.
4. Cuff Preparation: Ensure cuff is fully deflated and tube is not twisted.

CAUTION! Use only the provided AC adapter. Do not use other adapters to avoid damage.

Taking a Measurement

For most accurate results, measure at the same time each day, avoid eating, smoking, or exercising 30 minutes prior, and rest for 5 minutes before measuring.

1. Sit comfortably with back straight, feet flat on floor.
2. Wrap cuff on bare upper arm 1-2 cm above elbow. Artery mark should align with brachial artery.
3. Ensure cuff is snug but not tight. Rest arm on table with palm up.
4. Press START/STOP. Cuff will inflate automatically.
5. Remain still and quiet until measurement is complete and cuff deflates.
6. Readings display with pulse rate. Symbols appear for irregular heartbeat or hypertension if detected.

Tip: Do not move or talk during measurement.

Understanding Results

Systolic Pressure: Maximum pressure during heartbeat. Diastolic Pressure: Minimum pressure between heartbeats. Pulse: Heartbeats per minute.

WHO Indicator Bar Graph:

• Gray Zone (Low): Below 90/60 mmHg
• Green Zone (Normal): 90/60 to 119/79 mmHg
• Yellow Zone (Mild Hypertension): 120/80 to 139/89 mmHg
• Orange Zone (Moderate Hypertension): 140/90 to 159/99 mmHg
• Red Zone (Severe Hypertension): 160/100 mmHg and above

Symbols: Irregular heartbeat symbol flashes if detected. Hypertension symbol appears if systolic ≥135 or diastolic ≥85.

Memory Function

Stores up to 100 readings per user (200 total) with date and time.

1. View Memory: Press MEMORY button to scroll through stored readings for selected user.
2. Delete Memory: Press and hold MEMORY button for 5 seconds while in memory mode to delete all readings for current user.
3. Average Reading: Displays average of last 3 readings taken within last 10 minutes for current user.

Note: Memory is retained when batteries are removed or device is unplugged.

Care & Maintenance

Unplug adapter or remove batteries before cleaning. Use soft, dry cloth. Do not immerse in water or use abrasive cleaners.

1. Cuff: Wipe with damp cloth and mild detergent. Air dry completely before storage.
2. Monitor: Clean with dry cloth only.
3. Storage: Keep in provided case in a cool, dry place away from direct sunlight.
4. Batteries: Replace when battery icon appears low. Remove batteries if not using for extended period.

CAUTION! Do not disassemble or attempt to repair the device. No user-serviceable parts inside.

Error Messages

Display	Meaning	Action
E1	Cuff not wrapped correctly or air leakage	Re-wrap cuff securely; check tube connections.
E2	Excessive movement during measurement	Keep still and retry.
E3	Pulse signal too weak or irregular	Reposition cuff; ensure proper placement; rest and retry.
E4	Pressure over 300 mmHg	Consult physician; do not use if error persists.
E5	Device malfunction	Contact Omron customer service.
Lo	Low battery	Replace all 4 AA batteries.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries, loose adapter	Replace batteries; ensure adapter plugged in firmly.
Inaccurate reading	Improper cuff placement, movement	Follow measurement instructions precisely; remain still.
Cuff does not inflate	Tube kinked, battery low	Straighten tube; replace batteries.
Memory not storing	Memory full, wrong user selected	Delete old readings; select correct user before measuring.
Error code appears	See Error Messages section	Refer to table above for specific error.

Reset: Remove batteries/unplug adapter for 1 minute to reset device.

Service: For technical support, visit www.omronhealthcare.com or call 1-800-634-4350.