Omron 5 Series Instruction Manual

The Omron 5 Series is a comprehensive line of blood pressure monitors designed for home use, featuring advanced IntelliSense technology for accurate readings, one-touch operation, hypertension detection, irregular heartbeat detection, multi-user memory, and body movement detection. Powered by batteries or AC adapter. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Precautions 3. Parts Identification 4. Specifications 5. Initial Setup 6. Taking a Measurement 7. Memory Function 8. Understanding Results 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with LCD display, Arm cuff, AC adapter port, Battery compartment, START/STOP button, Memory button.

Feature	Description
IntelliSense Technology	Automatically inflates to optimal pressure for accurate readings
One-Touch Operation	Simple START/STOP button for easy use
Hypertension Indicator	Displays warning symbol if reading exceeds normal range
Irregular Heartbeat Detection	Detects and displays irregular heartbeat during measurement
Multi-User Memory	Stores up to 100 readings for two users
Body Movement Detection	Alerts if movement is detected during measurement
Date & Time Stamp	Records measurement date and time
Average Reading	Calculates average of last 3 readings
AC Adapter Port	For power connection (adapter sold separately)
Battery Compartment	Holds 4 AA batteries

Safety Precautions

Read all instructions before use.

Do not use on infants, young children, or persons unable to express themselves.
Consult physician before use if you have arrhythmia, other circulatory problems, or are pregnant.
Do not use while operating a vehicle or machinery.
Keep device away from children and pets.

WARNING! This device is not a substitute for professional medical diagnosis. Always consult your physician about your blood pressure.

Parts Identification

Front Panel: LCD display, START/STOP button, MEMORY button. Side: AC adapter port. Back: Battery compartment, cuff connector.

Cuff Components: Arm tube, metal ring, Velcro fastener, air plug.

LCD Display Symbols: Systolic pressure, Diastolic pressure, Pulse rate, User indicator, Memory full, Battery low, Hypertension indicator, Irregular heartbeat symbol, Date/Time, Average reading.

Specifications

Measurement Method: Oscillometric method
Measurement Range: Pressure: 0-299 mmHg, Pulse: 40-180 beats/minute
Accuracy: Pressure: ±3 mmHg, Pulse: ±5% of reading
Memory Capacity: 100 readings for 2 users (200 total)
Cuff Size: 22-32 cm (9-13 inches) arm circumference
Power Source: 4 AA batteries or AC adapter (6V DC, 600mA)
Battery Life: Approximately 300 measurements
Operating Conditions: Temperature: 10°C to 40°C, Humidity: 30% to 85% RH
Dimensions: Main unit: 135mm(W) × 105mm(H) × 50mm(D)
Weight: Approximately 350g (without batteries)

Initial Setup

Prepare device for first use.

Install batteries: Open battery compartment, insert 4 AA batteries observing polarity.
Set date and time: Press and hold MEMORY button for 3 seconds, use START/STOP to adjust.
Connect cuff: Insert air plug into cuff connector until it clicks.
Test device: Press START/STOP to ensure display lights up.

CAUTION! Use only recommended batteries. Remove batteries if device will not be used for extended period.

Taking a Measurement

For accurate results, follow these steps carefully.

Sit comfortably with feet flat on floor, back supported.
Wrap cuff on bare upper arm 1-2 cm above elbow.
Position cuff at heart level, tube facing downward.
Press START/STOP button - device will inflate automatically.
Remain still and quiet during measurement.
Results display automatically when measurement completes.
Press START/STOP to turn off device.

Tip: Avoid eating, smoking, or exercising 30 minutes before measurement. Rest for 5 minutes before measuring.

Memory Function

Store and review measurements.

Automatic storage: Measurements automatically save to current user.
Switch users: Press MEMORY button to toggle between User 1 and User 2.
Review memory: Press and release MEMORY button to scroll through stored readings.
Clear memory: Press and hold MEMORY button for 5 seconds while in memory mode.
Average reading: Device displays average of last 3 readings for current user.

Note: Memory full symbol appears when 100 readings stored for a user.

Understanding Results

Interpret your blood pressure readings.

Category	Systolic (mmHg)	Diastolic (mmHg)
Normal	Less than 120	and Less than 80
Elevated	120-129	and Less than 80
Hypertension Stage 1	130-139	or 80-89
Hypertension Stage 2	140 or higher	or 90 or higher
Hypertensive Crisis	Higher than 180	and/or Higher than 120

Symbol Indicators: Hypertension symbol appears if reading exceeds 135/85 mmHg. Irregular heartbeat symbol appears if detected during measurement.

Care & Maintenance

Proper care ensures accurate measurements and long device life.

Clean with soft, dry cloth only - no liquids or chemicals.
Store in cool, dry place away from direct sunlight.
Remove batteries if not using for 3 months or more.
Replace cuff if it becomes damaged or loses elasticity.
Do not disassemble or attempt repairs.

CAUTION! Never immerse device in water. Do not use near flammable gases.

Regulatory Information

FDA Cleared: This device complies with FDA standards for home blood pressure monitors. CE Mark: Meets European medical device directives. Manufactured by Omron Healthcare, Inc. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace all 4 AA batteries
Error E1 displayed	Cuff not connected properly	Check cuff connection; reinsert plug
Error E2 displayed	Cuff pressure error	Check for cuff leaks; replace if damaged
Error E3 displayed	Measurement error	Remain still; retake measurement
Inconsistent readings	Incorrect cuff position	Ensure cuff at heart level; retake measurement
Memory not working	Memory full	Clear memory or switch to other user
Device turns off during use	Low batteries	Replace batteries or use AC adapter

Reset: Remove batteries for 1 minute to reset device.

Service: 1-800-634-4350; www.omronhealthcare.com