Manual for Omron BP786N

The Omron BP786N is an advanced upper arm blood pressure monitor with IntelliWrap Cuff, TrueRead technology, dual LCD displays, irregular heartbeat detection, body movement detection, hypertension indicator, 200 memory storage with date and time, and averaging for the last 3 readings. It features AC adapter compatibility and operates on 4 AA batteries. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Taking a Measurement 8. Memory and Data Management 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with dual LCD displays, IntelliWrap Cuff (22-42 cm), AC adapter port, battery compartment, START/STOP button, MEMORY button.

Feature	Description
IntelliWrap Cuff	Pre-formed cuff for easy, correct placement
TrueRead Technology	Measures during inflation for comfort and accuracy
Dual LCD Displays	Shows systolic, diastolic, pulse, and date/time simultaneously
Irregular Heartbeat Detection	Detects and displays irregular heartbeat symbol
Body Movement Detection	Detects and alerts to excessive movement during measurement
Hypertension Indicator	Displays color-coded indicator based on blood pressure reading
200 Memory Storage	Stores readings with date and time for two users (100 each)
3-reading Average	Calculates average of last 3 readings taken within 10 minutes
AC Adapter Compatible	Can be powered via AC adapter (sold separately)
Automatic Power Off	Conserves battery life by turning off after 1 minute of inactivity

Installation

Unpack and inspect contents. Place on stable surface.

Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
Attach cuff: Connect cuff tube to the air connector on the left side of the unit.
Connect AC adapter (optional): Plug adapter into DC jack and then into wall outlet.
Set date and time: Press and hold CLOCK button to enter setting mode.

WARNING! Use only specified AC adapter. Do not mix old and new batteries.

First-Time Setup

Power on monitor; follow on-screen prompts.

Select user: Press USER button to select USER 1 or USER 2.
Set date and time: Press and hold CLOCK button, use SET button to adjust.
Apply cuff: Wrap cuff on bare upper arm 1-2 cm above elbow.
Position arm: Rest arm on table with cuff at heart level.

CAUTION! Ensure cuff is not twisted and fits snugly but not too tight.

Specifications

Measurement Method: Oscillometric.
Measurement Range: Pressure: 0-299 mmHg; Pulse: 40-180 beats/min.
Cuff Size: 22-42 cm (IntelliWrap).
Memory: 200 total readings (100 per user).
Display: Dual LCD with backlight.
Power Source: 4 AA batteries or AC adapter (AD-AF1).
Operating Conditions: Temperature: 10°C to 40°C; Humidity: 30% to 85% RH.
Storage Conditions: Temperature: -20°C to 60°C; Humidity: 10% to 95% RH.
Accuracy: Pressure: ±3 mmHg; Pulse: ±5% of reading.

Controls and Settings

Front Panel: START/STOP button, USER button, MEMORY button, CLOCK button, SET button.

Display Icons: User indicator, battery level, memory full, irregular heartbeat, body movement, hypertension indicator (color zones).

Settings: Date/Time format (12/24 hr), user selection, memory review, average calculation. Advanced: Hypertension indicator thresholds can be viewed but not modified.

Connecting to Power

Batteries: 4 AA. AC Adapter: Use only specified AD-AF1 adapter.

Turn off monitor before changing power source.
For batteries: Ensure correct polarity (+/-).
For AC adapter: Connect to DC jack first, then to wall outlet.
Battery icon shows level; replace when low.

Tip: Use AC adapter for extended use to conserve batteries.

Taking a Measurement

For most accurate results, measure at same time daily.

Sit comfortably: Rest for 5 minutes before measuring.
Apply cuff: On bare upper arm, align artery marker with brachial artery.
Start: Press START/STOP button; cuff inflates automatically.
Remain still: Do not talk or move during measurement.
Read results: Systolic, diastolic, and pulse display with hypertension indicator.
Store reading: Automatically saved to selected user memory.
Take average: Three readings within 10 minutes trigger average calculation.

WARNING! Do not use on injured arm or if you have severe blood flow problems.

Memory and Data Management

Memory Review: Press MEMORY button to scroll through stored readings with date/time. User Selection: Press USER button to toggle between USER 1 and USER 2. Average: Displayed after third reading within 10 minutes. Memory Full: Icon appears when 100 readings per user are stored; oldest is overwritten.

Care & Cleaning

Remove batteries before cleaning. Wipe with soft, dry cloth; do not use solvents or abrasives. Store in cool, dry place. Cuff can be hand-washed in mild detergent; air dry completely before use.

CAUTION! Do not immerse unit in water; avoid extreme temperatures.

Regulatory Information

FDA Cleared: KXXXXXX. FCC Part 15: Class B digital device; complies with interference limits. CE Marked: Meets EU medical device directives. Copyright © Omron Healthcare, Inc. For support, visit www.omronhealthcare.com or contact 1-800-634-4350.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries	Replace all 4 AA batteries; ensure correct polarity.
Error code E1	Cuff not attached properly	Check cuff connection; ensure tube is not kinked.
Error code E2	Excessive movement during measurement	Remain still and retry measurement.
Inaccurate reading	Incorrect cuff placement	Reapply cuff at heart level; ensure snug fit.
Memory not storing	Memory full	Review and delete old readings if needed.
Irregular heartbeat symbol	Detected irregular rhythm	Consult physician if symbol appears frequently.

Reset: Remove batteries for 1 minute to reset settings.

Service: 1-800-634-4350; www.omronhealthcare.com