Manual for Omron BP652 Cuff

The Omron BP652 Cuff is a replacement upper arm cuff designed for use with compatible Omron blood pressure monitors. It features D-Ring construction for easy self-application, a pre-formed tube for secure connection, and a wide range indicator to ensure proper fit. This manual covers safety information, features, proper application, care, and compatibility.

1. Features at a Glance 2. Safety Information 3. Parts Identification 4. Cuff Sizing Guide 5. Applying the Cuff 6. Connecting to a Monitor 7. Care & Maintenance 8. Troubleshooting 9. Specifications 10. Warranty & Support

Features at a Glance

Key components: D-Ring cuff body, pre-formed air tube, cloth wrap, range indicator, and metal clasp.

Feature	Description
D-Ring Design	Allows for easy one-handed application and secure fit
Pre-formed Tube	Prevents kinking and ensures reliable air flow to the monitor
Wide Range Indicator	Visual guide to confirm the cuff is the correct size for your arm
Comfortable Cloth Wrap	Soft material for comfortable wear during measurement
Universal Connector	Designed to connect securely to compatible Omron monitors
Metal Clasp & Hook	Durable fastening system for a consistent fit every time

Safety Information

Read all instructions before use to ensure accurate and safe blood pressure measurement.

Intended Use: This cuff is designed for use only with specified Omron blood pressure monitors.
Do Not Modify: Do not alter, puncture, or attempt to repair the cuff or air tube.
Proper Fit: Using an incorrectly sized cuff can lead to inaccurate readings. Always verify fit using the range indicator.
Inspection: Examine the cuff before each use for signs of wear, cracks, or leaks.
Storage: Store in a cool, dry place away from direct sunlight and extreme temperatures.

WARNING! Do not use if the cuff is damaged. Inaccurate blood pressure readings can occur. Consult your healthcare provider with any concerns.

Parts Identification

Familiarize yourself with the parts of the cuff for proper application.

Cuff Body: The wrap that contains the inflatable bladder.
D-Ring: The rigid plastic ring through which the cuff is threaded.
Cloth Wrap: The outer fabric layer.
Range Indicator: Markings (usually arrows or lines) printed on the cuff.
Air Tube: Pre-formed tube that carries air to and from the monitor.
Universal Connector: End of the air tube that plugs into the monitor.
Metal Hook & Clasp: Secures the cuff in place after threading through the D-Ring.

Cuff Sizing Guide

Correct cuff size is critical for accurate measurements. Measure your arm circumference.

Cuff Size	Arm Circumference Range	Indicator Mark Alignment
Standard	9" - 13" (22 cm - 32 cm)	Arrows within the range lines
Large	13" - 17" (33 cm - 43 cm)	Arrows within the range lines

How to Measure: Use a soft tape measure around the midpoint of your bare upper arm, between shoulder and elbow.

CAUTION! Using a cuff that is too small or too large will give unreliable readings.

Applying the Cuff

Follow these steps for proper cuff placement.

Sit quietly for 5 minutes before measuring. Remove any tight clothing from your arm.
Hold the cuff by the D-Ring. Slide your arm through the loop so the D-Ring is on the outside of your arm.
Position the cuff so the bottom edge is about 0.5 - 1 inch (1-2 cm) above your elbow. The air tube should run down the center of your arm, over the brachial artery.
Pull the end of the cuff snugly across your arm and press the cloth onto the hook material. Do not wrap too tightly.
Check the range indicator. The lines or arrows must be within the marked area. If not, the cuff size is incorrect.
Sit with your back straight, feet flat on the floor, and rest your arm on a table so the cuff is at heart level.

Connecting to a Monitor

Ensure a secure connection to your Omron blood pressure monitor.

Turn off the monitor before connecting.
Locate the cuff connector port on the side or front of your monitor.
Align the universal connector on the air tube with the port. It will only fit one way.
Push the connector firmly into the port until it clicks or seats fully. Do not force it.
Turn on the monitor. It is now ready for use.

Tip: Ensure the air tube is not twisted or pinched between the cuff and the monitor.

Care & Maintenance

Proper care extends the life of your cuff.

Cleaning: Wipe the cloth wrap with a soft, slightly damp cloth if soiled. Do not immerse in water or use detergents, solvents, or abrasives.
Drying: Allow to air dry completely before storing or using.
Storage: Loosely coil the air tube; do not bend sharply. Store in the provided pouch or a clean, dry place.
Inspection: Regularly check the cuff, tube, and connector for cracks, tears, or loose parts.

CAUTION! Never machine wash, dry clean, iron, or expose to direct heat. This can damage the internal bladder.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Error Code on Monitor	Air leak or improper connection	Check that cuff connector is fully seated. Inspect tube and cuff for damage.
Cuff does not inflate	Kinked tube or blocked connector	Straighten the air tube. Ensure connector port on monitor is clear.
Readings feel too tight/loose	Incorrect cuff size or placement	Verify arm circumference and cuff size. Re-apply cuff, checking range indicator.
Inconsistent readings	Cuff applied over clothing or too loose	Apply cuff directly on bare arm. Ensure a snug fit.
Monitor displays no reading	Faulty connection	Disconnect and reconnect the cuff. Try a different cuff if available.

Note: If problems persist, the cuff may be damaged and require replacement.

Specifications

Product Name: Omron BP652 Replacement Cuff
Type: Upper Arm, D-Ring
Compatible Models: Consult Omron website or monitor manual (e.g., Series 3, 5, 7, 10, etc.)
Arm Circumference: Standard: 9" - 13" (22-32 cm)
Tube Length: Approximately 12 inches (30 cm)
Connector Type: Universal Omron quick-connect
Material: Nylon wrap, PVC bladder, plastic D-Ring

Warranty & Support

This cuff may be covered under the warranty of your original Omron monitor. Please refer to your monitor's warranty information.

For Support:
Omron Healthcare, Inc.
Website: www.omronhealthcare.com
Customer Support: 1-800-634-4350

Disposal: Dispose of this product in accordance with local electronic or plastic waste regulations.